氮杂冠醚与碱金属离子配位反应的研究

滴定量效法是研究反应热化学和热力学的重要手段之一．用这种方法对冠醚与金属离子的配位反应热力学性质进行研究一直受到很大关注【且S习．但是对氨杂冠林，尤其是一系列结构相似的氨杂冠醚体系进行系统的热力学性质研究的报导不多．前文K则曾报导了用自组装的消定量热计对银（I）－a吹体系和铜（11）·N，N’一问位取代革基乙二胺体系的配位反应热化学研究结果·本文报导从（对位取代革基）k杂15冠5卜RPW15CS，R＝CIZH；CHa；CHso）与碘化钠和碘化钾在25T、无水乙过溶液中进行配位反应的消定量效研究结果．讨论了配体上取代基的电…     

几种改进的CoMFA方法比较研究血小板活化因子拮抗剂

由于传统的比较分子场分析(CoMFA)方法本身存在一些缺陷，使得分子的叠合 规则以及叠合分子的空间取向和空间位置等因素对q~2的影响很大，因此相继提出 了几种改进的CoMFA方法。为了优化CoMFA结果，应用传统的CoMFA方法和交叉验证 的R~2引导的区域选择法(q~2-GRS)、全取向搜索法（AOS）、全空间搜索法（APS） 以及比较分子相似性指数(CoMSIA)等四种改进的CoMFA方法，对18个pinusolide类 衍生物这类新发现的血小板活化因子（PAF）拮抗剂进行了比较研究。结果表明四 种改进的CoMFA方法得到的q~2值均比传统CoMFA的高。q~2-GRS方法得到的q~2值有 所提高，但综合结果并不理想，AOS与APS得到的q~2较为理想，而在CoMSIA中， q~2几乎不受空间取向或空间位置的影响。同时我们引人基于样本的偏最小二乘法 （SAMPLS）取代原AOS／APS程序中的传统PLS进行统计分析，明显提高了其运行速 度。最后，根据q~2最高的CoMFA模型和CoMSIA模型设计了几个预测活性更高的 pinusolide类似物。     

环境水样及食品中亚硝酸根的分析进展

评述了自1997年至2002年国内外环境水样及食品中亚硝酸根(NO2^-)的分析进展。包括分子光谱法、电化学分析法和色谱分析法，引用文献96篇。     

高压下C60晶体玻璃化行为的理论研究

通过构造C_(60)分子间的相互作用，研究了在不同压力下C_(60)晶体中的取向有序结构．利用计算出来的两个取向之间的能量差和相隔势驿，研究了热平衡时取向占有几率和玻璃化转变温度的压力相关性．结果与实验符合．     

STUDY ON THE CONCENTRATION DEPENDENCE OF ORIENTATION OF POLYSTYRENE ON SILVER BY THE SERS TECHNIQUE*

Polystyrene films were adsorbed onto a silver surface from dichloromethane solutions with concentrations of 0.1 to12 wt%, and then studied by the surface enhanced Raman technique. A critical concentration for coil interpenetration wasobserved.     

[2+2]-Photocycloaddition von Cyclohexen an 2-Acetyl-5,5-dimethyl-1,3-cyclohexandion und 3-Acetyl-1,5,5-trimethyl-2,4-pyrrolidindion

Summary Irradiation of solutions of excess cyclohexene and 2-acetyl-5,5-dimethyl-1,3-cyclohexanedione (1), and 3-acetyl-1,5,5-trimethyl-2,4-pyrrolidinedione (4) results mainly in the formation of 1,5-diones2 and5. These originate from intermediate cycloadducts of cyclohexene and theexo-enols of the cyclic 1,3-diketones. The yields decrease with increasing polarity of the solvent. In solution2 and5 are in equilibrium with the cyclic hemiacetales3 and6.

     

REDUCTION OF C=C DOUBLE BOND WITH BOROHYDRIDE EXCHANGE RESIN-TRANSITION METAL COMPOUND SYSTEMS

Borohydride exchange resin-transition metal(Co,Ni,Cu,)compoundsystems reduced C=C double to C-C single bond in ethanol.     

LiCoO2中锂离子固相扩散系数随循环次数的变化

The solid diffusion coefficient of lithium-ion in LiCoO₂ cathode material has been investigated by the capacity intermittent titration technique (CITT) at different voltages and at different charge/discharge cycles. By SEM, XRD and FTIR techniques, the structure of LiCoO₂ was studied before and after charge-discharge cycles, and the relationship between solid diffusion coefficient and crystal structure was further discussed. CITT results show that the value of Li⁺ solid diffusion coefficient of LiCoO₂ is about 10^-12 cm²·s^-1. During the whole charge-discharge cycles, the Li⁺ solid diffusion coefficient decreased within the voltage of 4.0～4.3 V, which is attributed to the change of the structure of LiCoO₂.     

Investigation of 2-[(<Emphasis Type="Italic">E</Emphasis>)-2-(4-diethylaminophenyl)-1-ethenyl]-1,3,3-trimethyl-3H-indolium as a new highly sensitive reagent for the spectrophotometric determination of nitrophenols

A new, simple, rapid, and sensitive spectrophotometric method has been developed for the determination of nitrophenols [picric acid (PA); dinitrophenols (DNP)] in wastewater samples. The method is based on the reaction of nitrophenols with 2-[(E)-2-(4-diethylaminophenyl)-1-ethenyl]-1,3,3-trimethyl-3 H-indolium chloride reagent to form the colored ion associates, which are extracted by organic solvents. The molar absorptivity of the ion associates of PA with the investigated reagent ranges from 8.3×10⁴ to 11.3×10⁴ L mol^–1 cm^–1, depending on the extractant. Because only PA is extracted in an acidic medium with the investigated reagent, but both PA and DNP are extracted in an alkaline medium, it is possible to determine both substances in a mixture. Appropriate reaction conditions have been established. The absorbance of the colored extracts obeys Beers law in the range of 0.04–4.58 mg L^–1 PA, 1.0–18.4 mg L^–1 2,4-DNP and 1.2–14.7 mg L^–1 2,6-DNP, respectively. The limit of detections, calculated from a blank test (n=10; P=0.95), are 0.05 mg L^–1 PA, 0.9 mg L^–1 (2,4-DNP), and 1.1 mg L^–1 (2,6-DNP), respectively.