Prussian blue–gold nanoparticles-ionic liquid functionalized reduced graphene oxide nanocomposite as label for ultrasensitive electrochemical immunoassay of alpha-fetoprotein

In this work, poly(diallyldimethylammonium chloride) (PDDA) protected Prussian blue/gold nanoparticles/ionic liquid functionalized reduced graphene oxide (IL-rGO-Au-PDDA-PB) nanocomposite was fabricated. The resulting nanocomposite exhibited high biocompatibility, conductivity and catalytic activity. To assess the performance of the nanocomposite, a sensitive sandwich-type immunosensor was constructed for detecting alpha-fetoprotein (AFP). Greatly enhanced sensitivity for this immunosensor was based on triple signal amplification strategies. Firstly, IL-rGO modified electrode was used as biosensor platform to capture a large amount of antibody due to its increased surface area, thus amplifying the detection response. Secondly, a large number of Au-PDDA-PB was conjugated on the surface of IL-rGO, which meant the enrichment of the signal and the more immobilization of label antibody. Finally, the catalytic reaction between H₂O₂ and the IL-rGO-Au-PDDA-PB nanocomposite further enhanced the signal response. The signals increased linearly with AFP concentrations in the range of 0.01–100 ng mL⁻¹. The detection limit for AFP was 4.6 pg mL⁻¹. The immunosensor showed high sensitivity, excellent selectivity and good stability. Moreover, the immunosensor was applied to the analysis of AFP in serum sample with satisfactory result.     

Application of multiwall carbon nanotubes-based matrix solid phase dispersion extraction for determination of hormones in butter by gas chromatography mass spectrometry

The multiwall carbon nanotubes (MWCNTs)-based matrix solid phase dispersion (MSPD) was applied for the extraction of hormones, including 17-α-ethinylestradiol, 17-α-estradiol, estriol, 17-β-estradiol, estrone, medroxyprogesterone, progesterone and norethisterone acetate in butter samples. The method includes MSPD extraction of the target analytes from butter samples, derivatization of hormones with heptafluorobutyric acid anhydride-acetonitrile mixture, and determination by gas chromatography-mass spectrometry. The mixture containing 0.30 g graphitized MWCNTs and 0.10 g MWCNTs was selected as absorbent. Ethyl acetate was used as elution solvent. The elution solvent volume and flow rate were 12 mL and 0.9 mL min(-1), respectively. The recoveries of hormones obtained by analyzing the five spiked butter samples were from 84.5 to 111.2% and relative standard deviations from 1.9 to 8.9%. Limits of detection and quantification for determining the analytes were in the range of 0.2-1.3 and 0.8-4.5 μg kg(-1), respectively. Compared with other traditional methods, the proposed method is simpler in the operation and shorter in the sample pretreatment time.     

新型磺酸功能化离子液体理化性质的研究

合成了三类磺酸功能化离子液体,通过STA、DSC-TG、UV-Vis、运动粘度/密度计等手段考察了离子液体的热力学性质、酸度、粘度和密度等理化性质,发现离子液体阴阳离子的结构对这些理化性质有不同程度的影响,并对离子液体的结构与理化性质变化关系进行初步探讨.     

毛细管电泳-多壁碳纳米管/聚吡咯/磷钼酸修饰电极电化学检测饮用水中的溴酸根

用电化学聚合法制备多壁碳纳米管/聚吡咯/磷钼酸修饰电极,利用循环伏安法研究溴酸根在此修饰电极上的电化学行为.考察了实验参数对分离检测体系的影响,并在优化条件下,采用毛细管电泳-安培检测法对溴酸根进行检测.结果表明:溴酸根离子在1.0×10-6～5.0×10-3 mol/L范围内和峰面积呈良好的线性关系,检出限(S/N=...     

Effect of ionic liquid on dielectric, mechanical and dynamic mechanical properties of multi-walled carbon nanotubes/polychloroprene rubber composites

This paper focuses on the influence of ionic liquid on carbon nanotube based elastomeric composites. Multi-walled carbon nanotubes (MWCNTs) are modified using an ionic liquid at room temperature, 1-butyl 3-methyl imidazolium bis (trifluoromethylsulphonyl) imide (BMI) and modified MWCNTs exhibit physical (cation–π/π–π) interaction with BMI. The polychloroprene rubber (CR) composites are prepared using unmodified and BMI modified MWCNTs. The presence of BMI not only increases the alternating current (AC) electrical conductivity and polarisability of the composites but also improves the state of dispersion of the tubes as observed from dielectric spectroscopy and transmission electron microscopy respectively. In addition to the hydrodynamic reinforcement, the formation of improved filler–filler networks is reflected in the dynamic storage modulus (E′) for modified MWCNTs/CR composites in amplitude sweep measurement upon increasing the proportion of BMI. Hardness and mechanical properties are also studied for the composites as a function of BMI.     

Banana fiber/chemically functionalized polypropylene composites with in-situ fiber/matrix interfacial adhesion by Palsule process

Chemically functionalized maleic anhydride (MAH)-grafted polypropylene matrix has been used (in place of polypropylene as matrix with compatibilizer) to process banana fiber/chemically functionalized polypropylene (BF/CFPP) composites, without using any compatibilizer and without any fiber modification by Palsule process. Fiber/matrix interfacial adhesion generated, in-situ, due to interactions between BF and the MAH of the CFPP matrix has been established by Fourier transform infrared spectroscopy and scanning electron microscopy. Mechanical properties of the BF/CFPP composites developed by Palsule process with in-situ fiber/matrix interfacial adhesion in this study have been found to be higher than those of the matrix and it increases with increasing amounts of fibers in composites, and are better than properties of literature reported BF/polypropylene composites processed with compatibilizers. Measured modulus of BF/CFPP composites compares well with values predicted by rule of mixtures, Hrisch model, Halpin-Tsai equations and its modified Nielsen version, and with Palsule equation. The feasibility of developing natural fiber/MAH grafted polyolefin composites by Palsule process without using any compatibilizer and without any fiber treatment is demonstrated.     

Synthesis of well‐defined polymers end‐functionalized with crosslinkable aziridine groups by living anionic polymerization

Well‐defined end‐functionalized polystyrene, poly(α‐methylstyrene), and polyisoprene with polymerizable aziridine groups were synthesized by the termination reactions of the anionic living polymers of styrene, α‐methylstyrene, and isoprene with 1‐[2‐(4‐chlorobutoxy)ethyl]aziridine in tetrahydrofuran at ?78 °C. The resulting polymers possessed the predicted molecular weights and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.1) as well as aziridine terminal moieties. The cationic ring‐opening polymerization of the ω‐monofunctionalized polystyrene having an aziridinyl group with Et₃OBF₄ gave the polymacromonomer, whereas the α,ω‐difunctional polystyrene underwent crosslinking reactions to afford an insoluble gel. Crosslinking products were similarly obtained by the reaction of the α,ω‐diaziridinyl polystyrene with poly(acrylic acid)‐co‐poly(butyl acrylate). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4126–4135, 2005     

Electrospray ionization mass spectrometry of organic-inorganic materials: identification and gas-phase reactivity of functionalized octahedral rhenium(III) clusters

Electrospray ionization mass spectrometry was used for the analysis of functionalized rhenium clusters such as [Re6Se8(o-Me2TTFPPh2)6]2+ (1), {Re6Se8[(o-Me2TTF)2PPh]6}2+ (2) and [Re6Se8(MePPh2)6]2+ (3). The high-resolution mass spectra of the intact clusters, performed in dichloromethane, confirm the identification of the compounds by comparison with the theoretical isotopic distributions. Low-resolution full-scan mass spectra recorded at increasing desolvation cone voltage values allow the study of the intrinsic reactivity of ionic species. The survival yield curves illustrating the bimolecular reactivity of 1 and 2 suggest that a bisdimethyltetrathiafulvalene(phenyl)phosphine ligand increases the stability of the functionalized ML6(2+) cluster 2. In the case of the 3, instead of loss of a neutral ligand, ligand exchange is observed either with traces of water present in dichloromethane or with acetonitrile used as solvent.     

工科基础物理实验课程教学改革与实践

提出了模块化教学体系的新思路及具体实施方案。在教学上将传统内容与现代高新技术相互结合;教学方法上将程序式与多元式相结合,注重了基本技能、实验总结能力和创新精神的培养。总结了试点以来取得的教学经验和体会,并对不足之处进行了分析。     

The effect of crystallization behavior on high conductivity,enhanced mechanism and thermal stability of poly(ε-caprolactone)/multi-walled carbon nanotube composites

Poly(ε-caprolactone) (PCL) composites filled by multi-walled carbon nanotubes (MWCNTs) which was non-covalently modified by the combined surfactants of poly(sodium 4-styrenesulfonate) and cetyltrimethyl-ammonium bromide (PSS-CTAB) were fabricated via simple solution precipitation method. PCL/MWCNTs composites provided with the low procolation threshold (0.4?wt%) and high electrical conductivity due to good dispersion of MWCNTs. And the excellent mechanical properties and enhanced thermal stability were also obtained with the addition of modified MWCNTs. In addition, all PCL composites showed significantly enhanced crystallization with increasing the MWCNTs contents, which demonstrated that the MWCNT-induced crystallization of PCL could effectively regulate the properties of composites. In a word, introducing non-covalent functionalized MWCNTs in the polymer system was a promising way for developing excellent conductive composites.