2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

On the isomorphism problem in the class of extensions of a free group by an infinite cyclic group

In the automorphism group of a rank 3 free group we find two nonconjugate automorphisms whose mapping tori are isomorphic groups.     

基于2,5-二(4′-甲酰基苯基)苯乙烯的螺旋链光学活性聚合物的合成与表征

通过2,5-二溴苯乙烯与对甲酰基苯硼酸的Suzuki偶联反应得到2,5-二(4′-甲酰基苯基)苯乙烯.在催化剂量的冰乙酸存在下,与光学纯的(S)-(-)-α-甲基苄胺或(R)-(+)-α-甲基苄胺发生缩和反应,得到了一对手性非外消旋单体,(+)-2,5-二{4-′[(N-(S)-α-甲基苄亚胺基)次甲基]苯基}苯乙烯和(-)-2,5-二{4′-[(N-(R)-α-甲基苄亚胺基)次甲基]苯基}苯乙烯.以偶氮二异丁腈(AIBN)或过氧化苯甲酰(BPO)为引发剂,经自由基溶液聚合得到光学活性聚合物.比旋光度、紫外-可见吸收光谱以及圆二色光谱研究表明,聚合物主链可能形成了某一方向占优的稳定螺旋构象,且该螺旋构象的旋光方向与单体的旋光方向相反.聚合条件对聚合物的光学活性有很大影响,在极性较大的芳香族溶剂和较高温度下得到的聚合物具有和单体相差更大的比旋光度.侧基的手性基团脱除后,聚合物仍具有一定的旋光性,说明聚合过程中形成的螺旋手性具有一定的记忆效应.     

Atomistic packing models for experimentally investigated swelling states induced by CO2 in glassy polysulfone and poly(ether sulfone)

Atomistic packing models have been created, which help to better understand the experimentally observed swelling behavior of glassy polysulfone and poly (ether sulfone), under CO₂ gas pressures up to 50 bar at 308 K. The experimental characterization includes the measurement of the time‐dependent volume dilation of the polymer samples after a pressure step and the determination of the corresponding gas concentrations by gravimetric gas‐sorption measurements. The models obtained by force‐field‐based molecular mechanics and molecular dynamics methods allow a detailed atomistic analysis of representative swelling states of polymer/gas systems, with respect to the dilation of the matrix. Also, changes of free volume distribution and backbone mobility are accessible. The behavior of gas molecules in unswollen and swollen polymer matrices is characterized in terms of sorption, diffusion, and plasticization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1874–1897, 2006     

Surface free energy of CrNx films deposited using closed field unbalanced magnetron sputtering

CrN_x thin films have attracted much attention for semiconductor IC packaging molding dies and forming tools due to their excellent hardness, thermal stability and non-sticking properties (low surface free energy). However, few data has been published on the surface free energy (SFE) of CrN_x films at temperatures in the range 20-170 °C. In this study CrN_x thin films with CrN, Cr(N), Cr₂N (and mixture of these phases) were prepared using closed field unbalanced magnetron sputtering at a wide range of Cr⁺² emission intensity. The contact angles of water, di-iodomethane and ethylene glycol on the coated surfaces were measured at temperatures in the range 20-170 °C using a Dataphysics OCA-20 contact angle analyzer. The surface free energy of the CrN_x films and their components (e.g., dispersion, polar) were calculated using the Owens-Wendt geometric mean approach. The influences of CrN_x film surface roughness and microstructure on the surface free energy were investigated by atomic force microscopy (AFM) and X-ray diffraction (XRD), respectively. The experimental results showed that the lowest total SFE was obtained corresponding to CrN at temperature in 20 °C. This is lower than that of Cr(N), Cr₂N (and mixture of these phases). The total SFE, dispersive SFE and polar SFE of CrN_x films decreased with increasing surface temperature. The film roughness has an obvious effect on the SFE and there is tendency for the SFE to increase with increasing film surface roughness.     

A mathematical model of the ring-spinning process

This paper develops a mathematical model of the ring-spinning process that takes into account its non-stationary nature. A complex system of differential equations is obtained, which from a mathematical point of view constitutes a ‘free-boundary’ problem. Its solution involves definition of suitable boundary conditions related to the mechanical characteristics of the process and of the spinning machine itself. The boundary conditions which determine the solution are pointed out. A numerical solution of the system of differential equations can be obtained by the Finite-Segments method, as shown in an example.     

临界可压缩模类与弱Jacobson根

本文讨论临界可压缩模类和结合环的弱Ｊａｃｏｂｓｏｎ根．首先，我们证明了非平凡的临界可压缩模类是素模的特殊类．其次，我们引入结合环的弱Ｊａｃｏｂｓｏｎ根．弱Ｊａｏｎｂｓｏｎ根是特殊根．最后，我们给出有关弱本原环，半弱本原环和弱Ｊａｃｏｂｓｏｎ根环的某些性质．     

Synthesis of functional polymers—Vinylidene fluoride based fluorinated copolymers and terpolymers bearing bromoaromatic side‐group

The radical co‐ and terpolymerization of 4‐[(α,β,β‐trifluorovinyl)oxy]bromo benzene (TFVOBB) with 1,1‐difluoroethylene (or vinylidene fluoride, VDF, or VF₂), hexafluoropropene (HFP), perfluoromethyl vinyl ether (PMVE), and chlorotrifluroroethylene (CTFE) is presented. Although TFVOBB could be thermocyclodimerized, it could not homopolymerize under radical initiation. TFVOBB could be copolymerized in solution under a radical initiator with VDF or CTFE comonomers, while its copolymerization with HFP or PMVE were unsuccessful. The terpolymerization of TFVOBB with VDF and HFP, or VDF and PMVE, or VDF and CTFE also led to original fluorinated terpolymers bearing bromoaromatic side‐groups. The conditions of co‐ and terpolymerization were optimized in terms of the nature of the radical initiators, and of the nature of solvents (fluorinated or nonhalogenated). Various monomer concentrations in the co‐ and terpolymers were assessed by ¹⁹F and ¹H‐NMR spectroscopy. The thermal and physico chemical properties were also studied. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5077–5097, 2004     

The effect of crystallinity on chain mobility and free volume in the amorphous regions of a miscible polycarbonate/polyester blend

Homopolymers and blends of polycarbonate/ThermX have been investigated by differential scanning calorimetry, dynamic mechanical analysis, density measurements, and positron annihilation lifetime spectroscopy. The study focuses on the chain mobility and free volume in the amorphous miscible regions of the blends and how this mobility and free volume are affected by increasing crystallinity. It is proposed that judicious annealing, which results in increasing crystallinity (while avoiding ageing or transesterification), induces a constraint on the amorphous region leading to an increase in T_g and coalescence of free volume sites. © 1994 John Wiley & Sons, Inc.