Temperature Development of Homo- and Hetero-Clustering in Saturated Vapors

Computational findings of temperature increase of clustering degree in saturated vapors are analyzed. A thermodynamic proof is presented and a simple criterion derived. Illustrations are based on saturated steam, magnesium and carbon vapor. The results are applicable to synthesis of fullerenes, metallofullerenes, and heterofullerenes, chemical vapor deposition technique, or atmospheric chemistry.     

Adducts of Rh2[MTPA]4 with some phosphine chalcogenides: nature of binding and ligand exchange

Adducts of four phosphine chalcogenides with the chiral dirhodium complex ([Rh-Rh]) were investigated by variable-temperature 1H and 31P NMR spectroscopy in order to compare their properties as axial ligands. Whereas the selenide (1) and the sulfide (2) are strong ligands with electrostatic attraction and, in addition, a significant orbital (HOMO-LUMO) interaction, the phosphine oxide compounds (P=O) bind primarily via electrostatic attraction and are relatively weak donors. Moreover, the overall bond strength in these adducts depends on steric congestion around the P=O group.     

Electrical Conductance Studies in Aqueous Solutions with Ascorbate Ions

Conductivity measurements in dilute aqueous solutions of L-ascorbic acid, sodium-L-ascorbate, magnesium-L-ascorbate, calcium-L-ascorbate and ferrous-L-ascorbate were performed in the (288.15 to 323.15) K temperature range. The limiting molar conductances of the ascorbic anion, λ^∘(HAsc⁻, T), and the dissociation constants of ascorbic acid, K(T), were derived by the use of the Debye-Hückel equation for the activity coefficients and the Onsager and Quint and Viallard conductivity equations.     

Preparation of flame retardant polyamide 6 composite with melamine cyanurate nanoparticles in situ formed in extrusion process

This paper is focused on in situ preparation of melamine cyanurate (MCA) nanoparticles from reaction of melamine (MEL) and cyanuric acid (CA) and their flame retardant polyamide 6 (PA6) composite in the extrusion process through a novel reactive processing method. Fourier transform infrared (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) were utilized to characterize the in situ formed MCA nanoparticles and their blends with PA6. Introduction of pentaerythritol (LTP) and water-bound plasticizer dioctyl phthalate (DPT) into the extrusion reaction system greatly inhibits the evaporation of water required for melamine and cyanuric acid reaction at high temperature (higher than 180 °C), laying a foundation for successful in situ preparation of MCA through reactive processing. XRD and FT-IR measurements indicate that under the effect of pentaerythritol, dioctyl phthalate and water, melamine really reacts with cyanuric acid to in situ form MCA in extrusion process. The reaction degree is close to 100%. A very important finding through SEM is that the in situ formed MCA particles, which were found to have aspect ratio of about 7.5, radial size in the range of 70-300 nm (mostly 70-90 nm) and crystallite size of less than 22 nm, are uniformly dispersed in the matrix PA6 at nanoscale. The in situ formed MCA nanoparticles greatly improve the flame retardancy and the mechanical properties of flame-retarded PA6 materials, and the introduced plasticizer dioctyl phthalate also ameliorates the related impact property. The obtained flame-retarded PA6 materials have good comprehensive performance with flame retardancy UL-94 V-0 rating at 1.6 and 3.2 mm thickness, tensile strength 48.0 MPa, elongation at break 106.3% and Izod notched impact strength 8.92 kJ/m². Compared with flame-retarded PA6 material with in situ formed MCA, the one prepared through conventional blending of PA6 with commercial MCA product has improved tensile strength but deteriorated impact strength and flame retardancy.     

Effect of a novel phosphorous-nitrogen containing intumescent flame retardant on the fire retardancy and the thermal behaviour of poly(butylene terephthalate)

A novel phosphorus-nitrogen containing intumescent flame retardant (P-N IFR) was prepared via the reaction of a caged bicyclic phosphorus (PEPA) compound and 4,4′-diamino diphenyl methane (DDM) in two steps. The product was added to poly(butylene terephthalate) (PBT) to obtain halogen-free flame retarded polyester. UL-94 test, thermogravimetry and in situ infrared spectroscopy were used to characterize the flammability, thermal degradation properties and the char-forming process. It was shown that the phosphorus-nitrogen containing compound could improve both the flame retardancy and thermal stability more effectively than other P-N flame retardants. Furthermore, it was a good char-forming agent incorporated with the co-addition of polyurethane (PU) when the combustion occurred. The formation of P-N structure was incorporated in the char layer.     

配合物Zn(Phe)(NO3)2·H2O(s)的低温热容和标准摩尔生成焓

利用精密自动绝热热量计直接测定了配合物Zn(Phe)(NO3)2·H2O(s) (Phe:苯丙氨酸)在78-370 K温区的摩尔热容. 通过热容曲线的解析得到该配合物的起始脱水温度为, T0=(324.27±0.37) K. 将该温区的摩尔热容实验值用最小二乘法拟合得到摩尔热容(Cp, m)对温度(T)的多项式方程, 并且在此基础上计算出了它的舒平热容值和各种热力学函数值. 依据Hess定律, 通过设计热化学循环, 选择体积为100 mL浓度为2 mol·L-1 的盐酸作为量热溶剂, 利用等温环境溶解-反应热量计分别测定混合物{ZnSO4·7H2O(s)+2NaNO3(s)+L-Phe(s)}和{Zn(Phe)(NO3)2·H2O(s)+Na2SO4(s)}的溶解焓为, ⊿dH0m,1 =(69.42±0.05) kJ·mol-1, ⊿dH0 m,2 =(48.14±0.04) kJ·mol-1, 进而计算出该配合物的标准摩尔生成焓为, ⊿fH0m =-(1363.10±3.52) kJ·mol-1. 另外, 利用紫外-可见(UV-Vis)光谱和折光指数(refractiveindex)的测量结果检验了所设计的热化学循环的可靠性.     

Equilibrium studies of Mn(II), Mg(II), Ca(II), Sr(II) and Ba(II) withp-fluoro-,p-chloro-,p-bromo-,p-methyl-benzoylacetones and 1-(4-fluorophenyl)-1,3-pentanedione

The rawpH-data, obtained from the potentiometric titrations of the titled ligands with NaOH in 75% (v/v) dioxane-water mixture performed at 20, 30 and 40°C at constant ionic strength (=0.1M-NaClO₄), have been adequately corrected for dilution, and solvent effects in order to evaluate thermodynamic dissociation constants. Variance of the latter as a function of temperature has also been accounted for. The differing magnitudes of thermodynamic dissociation constants of the titled ligands have been explained on the basis of the non coplanar orientation of the phenyl ring in the ligands and a comparison has been made with those of unsubstituted benzoylacetone, dibenzoylmethane and acetylacetone.Following similar technique, thermodynamic stepwise and overall formation constants of the titled metal-ligand systems have been obtained and the results correlated with ligand basicity inverse metal crystal radii and second potentials of metals. Decrease in the free enthalpy (–G) of complexation reaction has also been evaluated.

---

Untersuchung der Gleichgewichte von Mn(II), Mg(II), Ca(II), Sr(II) und Ba(II) mit p-Fluor-, p.-Chlor-, p-Brom-, p-Methyl-benzoylaceton und 1-(4-Fluorphenyl)-1,3-pentanedion

Zusammenfassung Aus der potenitometrischen Titration der Titelverbindungen mit NaOH in 75 (v/v) Dioxan—Wasser bei, 20, 30 und 40°C bei konstanter Ionenstärke (=0,1M-NaClO₄) wurden die thermodynamischen Dissoziationskonstanten ermittelt. Verdünnungs-, Lösungsmittel-und Temperatureffekte wurden berücksichtigt. Die unterschiedlichen Dissoziationskonstanten werden mit der Nichtplanarität des Phenylrings in den Liganden erklärt. Außerdem wurden die Komplexbildungskonstanten bestimmt; sie sind in die Diskussion miteinbezogen.

     

Study on the stability of noradrenaline and on the determination of its acidity constants

Noradrenaline is a catecholamine which has been largely recognised to play a very important role in biological systems. In view of the neurotransmitter's alleged importance, this work aimed at showing the influence of time on its spectral behaviour using different analytical methods and determining its acidity constants through spectrophotometric titration and by the so-called point-by-point analysis, where the samples are freshly prepared for each pH value investigated at the instant required. Because the catecholamines are light-sensitive and likely to react with the oxygen in the surrounding air, both methods used preclude its incidence onto the samples being analysed under the presence of a nitrogen atmosphere maintained over the solutions. The constants obtained through point-by-point analysis were log beta1 = 30.71+/-0.16, log beta2 = 22.00+/-0.15 and log beta3 = 11.69+/-0.16.     

Stationary phase properties of the organic molten salt ethylpyridinium bromide in gas chromatography

Summary The organic molten salt, 1-ethylpyridinium bromide, is suitable for use as a stationary phase in gas chromatography. It has a usable liquid temperature range of 110 to 160°C. It undergoes a single phase transition at 110°C which corresponds to the bulk melting point. Below the melting point the phase may be used as a selective adsorbent, although column efficiency and peak symmetry deteriorate as the temperature is lowered from the melting point. Above the melting point, ethylpyridinium bromide can be used to separate a wide variety of organic compounds retaining strongly those compounds possessing large dipole or hydrogen bonding functional groups.     

Importance of the Debye interaction in organic solutions: Henry's law constants for polar liquids in nonpolar solvents and vice versa

Henry's law constants have been determined for -butyrolactone (BL), ethyl acetate (EA), and 2-methyl-3-pentanol (MEP) in mixtures of iso-octane (ISO) and toluene (TOL), for BL, EA, TOL, and ISO in cinnamaldehyde (CIN) and for TOL and ISO in each other and in BL. From these data and published vapor pressures, the activity coefficients at infinite dilution and the standard molar Gibbs free energy of transfer, G ₂ ⁰ of the solutes from dilute solution in ISO to dilute solution in each solvent medium have been calculated. The different behavior patterns of BL and EA are attributed to differences in their abilities to exist in different conformations possessing different dipole moments. For polar solutes, G ₂ ⁰ decreases with increasing polarizability of the solvent and with increasing dipole moment of the solute, suggesting increased contributions from dipole-induced dipole (Debye) interactions. The sigmoidal plot of G ₂ ⁰ against the change in pair potential energy calculated from the classical expressions suggests that G ₂ ⁰ seriously underestimates the strength of the Debye interactions in comparison with the London interactions.