An unequivocal synthesis of some substituted 1,2,4-triazolo[1,5-a]pyrimidines

An unequivocal synthesis of 5-chloro-7-methyl- (8) and 7-methyl-1,2,4-triazolo[1,5-a]pyrimidine (10) from 2-amino-4-chloro-6-methylpyrimidine (5) through the corresponding amidine6 and formamide oxime7 was developed. It was unambigously shown by comparison of the chemical shifts and the magnitude of coupling constants that the compounds obtained by condensation of 3-amino-1,2,4-triazole (12) and ethyl acetoacetate (13) and some further transformations are isomeric 5-methyl substituted 1,2,4-triazolo[1,5-a]pyrimidines1,9, and11.

---

Eine eindeutige Synthese einiger substituierter 1,2,4-Triazolo[1,5-a]pyrimidine

Zusammenfassung Es wurde ein eindeutiger Syntheseweg für 5-Chlor-7-methyl- (8) und 7-Methyl-1,2,4-triazolo[1,5-a]pyrimidin (10) ausgehend von 2-Amino-4-chlor-6-methylpyrimidin (5) über das entsprechende Amidin6 und das Formamidoxim7 entwickelt. Durch Vergleich von chemischen Verschiebungen und Kopplungskonstanten konnte eindeutig gezeigt werden, daß die Verbindungen, die bei der Kondensation von 3-Amino-1,2,4-triazol (12) and Ethylacetoacetat (13), sowie einige weitere Transformationsprodukte, isomere 5-Methylsubstituierte 1,2,4-Triazolo[1,5-a]pyrimidine sind (1,9,11).

     

Advanced statistical evaluation of the complex formation constants from electrophoretic data II: Diastereomeric ion-pairs of (R,S)-N-(3,5-dinitrobenzoyl)leucine and tert-butylcarbamoylquinine

Intermolecular association and ion-pair formation, respectively, between a cationic chiral selector, viz. o-9-(tert-butylcarbamoyl) quinine (CQN), and the both enantiomers of anionic N-(3,5-dinitrobenzoyl)leucine, (R)-DNB-Leu and (S)-DNB-Leu, were investigated by affinity capillary electrophoresis (ACE). Thus, binding constants of the both diastereomeric ion-pairs, (R) and (S)-DNB-Leu/CQN associates, were determined by different experimental setups and correction of nonlinear effects. A reciprocal setup was employed for the high-affinity (S)-enantiomer, and the experimental mobility data obtained for CQN at variable (S)-DNB-Leu concentrations in the background electrolyte were linearized and evaluated by advanced statistical model. A binding constant of K_S=125.1 l mol⁻¹ was afforded. The constant for the (R)-enantiomer, which is outside the range suitable for direct affinity CE, was obtained from indirect affinity CE utilizing the separation of the DNB-Leu racemate at a single appropriate CQN concentration in the BGE (resolution method) taking advantage of the known constant for the (S)-enantiomer yielding a binding constant of K_R=2.51 l mol⁻¹. Thereby, the so-called “constant time method” was adopted for the required precise measurement of the effective mobilities of the both enantiomers. A combined approach of reciprocal affinity CE with racemic DNB-Leu as additive and the resolution method confirmed the results. The resulting constants evidence excellent enantioselectivity of the tert-butylcarbamoyl derivative of the cinchona alkaloid quinine as chiral selector for N-(3,5-dinitrobenzoyl) derivatives of amino acids.     

Synthesis of three-layered titanates BaLn<Subscript>2</Subscript>Ti<Subscript>3</Subscript>O<Subscript>10</Subscript> in systems with coprecipitated hydroxocarbonates

The synthesis of three-layered titanates BaLn₂Ti₃O₁₀ (Ln = La, Nd, Sm) in systems with coprecipitated hydroxocarbonates was studied. It was established that they are formed through an intermediate phase with a defective perovskite structure followed by its transformation into the three-layered structure by the ordering of vacancies and rare-earth element and barium atoms and subdivision into three-layered blocks. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 6, pp. 349–353, November–December, 2007.     

碳糖苷合成的新进展

本文介绍了近几年来有关碳糖苷合成的最新进展, 包括亲电取代、亲核糖取代、过渡金属催化、异头碳自由基反应、重排和环加成反应以及糖环形成反应等。     

Freon (CHF<Subscript>3</Subscript>)-assisted atomization for the determination of titanium using ultrasonic slurry sampling–graphite furnace atomic absorption spectrometry (USS–GFAAS): a simple and advantageous method for solid samples

A simple and advantageous method for the determination of titanium using graphite furnace atomic absorption spectrometry with slurry sampling has been developed. Titanium is one of the refractory elements that form thermally stable carbides in the graphite tube, which leads to severe memory effects. Trifluoromethane (Freon-23) was applied in the purge gas during the atomization step or alternatively just prior to the atomization to successfully eliminate the problems of carbide formation and increase the lifetime of the furnace tube which could be used for more than 600 heating cycles. A flow rate of 40 mL min^–1 (5% of Freon in argon) was used to obtain symmetrical peaks with no tailing. However, when the gas flow rate was too high (250 mL min^–1) the peak-tailing and memory effects reappeared. Ti was determined in various materials covering a wide range of concentrations, from 2.8 g g^–1 to 12% (m/m) Ti. The accuracy of the method was confirmed by analyzing certified reference materials (CRMs) or by comparing the results with those obtained using inductively coupled plasma–atomic emission spectrometry (ICP–AES) after decomposition of the samples. The materials analyzed were soil, plant, human hair, coal, urban particulate matters, toothpaste, and powdered paint.     

On the structure formation of hydrophobed particles in the boundary layer of water and octane phases

Two-dimensional aggregation of the surface modified glass beads was carried out in the boundary layer of water and octane phases. The effect of particles' hydrophobicity was investigated on the structure of forming aggregates and the growth process. The structure of the aggregates and their growth were characterized by a density function which demonstrates the change of mean particle density as a function of aggregate size. The growth yielded fractal or nonfractal structures in the investigated systems. The fractal structure of the aggregates was observed to be dependent on restructuring processes controlled by the surface properties of the beads.The experimental results are compared with earlier findings for aggregation of hydrophobic beads in the boundary layer of water and air phases.On leave from Loránd Eötvös University, Budapest, Hungary     

Tricarbonyl(dialkylamidocyclohexa-1,3-diene)iron: Preparation,Isomerization and Stereochemistry

The direct reaction of iron pentacarbonyl with diethylamidocyclohexadiene gave three isomeric tricarbonyliron complexes, 1, 2 and 3. Only 1 isomerized to give 2 under acidic conditions, whereas 3 remained unchanged. The chemical properties of the tricarbonyl(amidocyclohexadiene)iron complexes differed from those of the tricarbonyl(carboxycyclohexadiene)iron complexes. Complex 3 which underwent no hydride abstraction with triphenylmethyl hexafluorophosphate, has an exo stereochemistry.     

烷烃电离能和生成焓的相关性

根据化合物形成过程中价电子能量变化与生成焓之间的关系, 推导出烷烃的生成焓和电离能之间的关系. 以21个烷烃化合物为模型将实验测定的电离能与标准生成焓进行直接关联, 证实了模型方程的适用性, 所得回归方程的相关系数达到0.9999, 估算值与实验值之间的标准偏差仅为0.03 eV. 同时还利用实验测定的标准生成焓对一系列烷烃的电离能作了预测.     

Palladium-catalyzed benzylic-like nucleophilic substitution of benzofuran-, benzothiophene- and indole-based substrates by dimethyl malonate anion

The palladium-catalyzed benzylic-like nucleophilic substitution of acetates derived from benzofuran, benzothiophene and indole was investigated. The asymmetric substitution on racemic 1-(2-benzofuryl)ethyl acetate gave disappointing results, but the substitution product was obtained in 98% ee from (S)-1-(2-benzofuryl)ethyl acetate with overall retention of configuration.     

On the cavitation energy of water

Free-energy-perturbation theory from molecular dynamics calculations has been used to obtain the DeltaG of adjoining cavities' formation in water. The DeltaGs for systems with three, five and seven cavities are compared with that of a single cavity of the same volume, and found to be in good agreement. The conditions under which the analytical formulation of the energy of cavity formation proposed by Pierotti holds are discussed. The data for a single cavity have been tabulated and can lend themselves to a simple numerical implementation in standard quantum chemical packages, which can be used when high accuracy for DeltaG(cav) is required.