Adsorption of Bovine Serum Albumin onto Polystyrene Latex Particles Bearing Saccharidic Moieties

The adsorption of bovine serum albumin (BSA) onto polystyrene latexes bearing various amounts of sugar moieties has been investigated as a function of pH and ionic strength and the results were compared to those for bare polystyrene latexes having negative surface charges. The functionalized latexes were produced by seeded copolymerization of (0.3 μm) liposaccharidic monomer onto polystyrene particles obtained by soap-free emulsion polymerization of styrene using potassium persulfate as initiator. At first, the electrophoretic mobility behavior of the various latexes was examined as a function of pH: a significant decrease was observed in the case of saccharide-containing latex particles compared to the bare particles. The adsorption of BSA onto these latexes exhibited a reduced amount of adsorbed BSA for those latex particles bearing saccharide groups. This adsorbed amount depends on the yield of saccharidic monomer incorporated onto the surfaces of the latex particles.     

千克级窄分子质量分布聚苯乙烯的制备与表征

以正丁基锂为引发剂，以经过处理的工业级环己烷为溶剂、四氢呋喃为促进剂，用阴离子聚合的方法，在常压和惰性气体保护条件下，制得一系列千克级窄分子质量分布的聚苯乙烯，利用IR、^1H-NMR、GPC等技术对聚苯乙烯产物进行了表征，分析了影响聚苯乙烯的分子质量及分子质量分布的因素。     

Friction coefficients of spheres having sticky or hairy surfaces

The theoretical equations for friction coefficients of spheres having sticky or hairy surfaces are presented. In the present treatment, the sticky surface is represented by a higher viscosity of fluid in the surface layer and the hairy surface is assumed to have a porous structure. The friction coefficients are given as functions of the thickness of the surface layer, the fluid viscosity in the surface layer and the segmental density of hairy chains.     

Surface-grafted polystyrene beads with comb-like poly(ethylene glycol) chains: preparation and biological application

We prepared surface-grafted polystyrene (PS) beads with comb-like poly(ethylene glycol) (PEG) chains. To accomplish this, conventional gel-type PS beads (35-75 microm) were treated with ozone gas to introduce hydroperoxide groups onto the surface. Using these hydroperoxide groups, poly(methyl methacrylate) (PMMA, Mn= 22,000-25,000) was grafted onto the surface of the PS beads. The ester groups of the grafted PMMA were reduced to hydroxyl groups with lithium aluminum hydride (LAH). After adding ethylene oxide (EO) to the hydroxyl groups, we obtained the PS-sg-PEG beads, which had a rugged surface and a diameter of 80-150 microm. We could obtain several kinds of the PS-sg-PEG beads by controlling the chain lengths of the grafted PMMA and the molecular weights of the PEG chains. The grafted PEG layer was about 30-50 microm thick, which was verified from the cross-sectioned views of the fluorescamine-labeled beads. These fluorescence images proved that the beads possessed a pellicular structure. Furthermore, we found that the surface-grafted PEG chains had the characteristic property of reducing non-specific protein adsorption on the beads.     

Synthesis and characterization of macrocyclic vinyl aromatic polymers

The synthesis and characterization by size exclusion chromatography, liquid chromatography, NMR, matrix‐assisted laser desorption/ionization, thermal analysis, and other techniques of well‐defined and narrow molecular weight distribution macrocyclic polystyrene (PS), poly(2‐vinylpyridine), poly(α‐methylstyrene), poly (2‐vinyl‐naphthalene) (P2VN), and poly(9,9‐dimethyl‐2‐vinylfluorene) (PDMVF) containing a single 1,4‐benzylidene, methylidene, or 9,10‐anthracenylidene unit are reviewed. The absorption and emission spectroscopy of PS, P2VN, and PDMVF is also discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2139–2155, 2006     

Dielectric analysis of polystyrene microcapsules using scanning dielectric microscope

 A dielectric imaging technique with a scanning dielectric microscope was applied to polystyrene microcapsules in an aqueous environment to study the electrical properties of individual ones. The dielectric images obtained over a frequency range from 10 kHz to 10 MHz showed frequency dependence, which indicated dielectric dispersion (or relaxation) due to interfacial polarization or the build up of charge on the boundaries between the microcapsule shell and the aqueous phases. The dielectric dispersion was analyzed based on an equivalent electrical circuit model and a shell-sphere model in which a spherical core is covered with an insulating shell. Received: 26 September 1997 Accepted: 26 December 1997     

Effect of electrolyte type on the electrokinetic behavior of sulfonated polystyrene model colloids

Sulfonated polystyrene latex particles were prepared by a two-stage shot-growth emulsion polymerization process in the absence of emulsifier. Sodium styrene sulfonate (NaSS) was used as an ionic co-monomer to produce a series of latex particles with the same particle size but with different surface charge densities. The electrophoretic mobility of this functionalized model colloid was studied in the presence of various types of inorganic electrolytes. The _e curves of these latexes exhibit a pronounced maximum at high electrolyte concentrations: 5·10^–2 M for 11 electrolytes and 10^–2 M for 21 and 12 electrolytes. When a 31 electrolyte (LaCl₃) was used, the electrophoretic mobility changed to positive values at high concentration due to the specific adsorption of lanthanum species. The experimental results for the electrokinetic characterization of these sulfonated polystyrene model colloids suggest that the surface of the particles is covered by a layer of oligomers or polymer chains which shift the shear plane toward the bulk solution, increasing the anomalous surface conductance of the polystyrene microsphere-electrolyte solution interface.     

Synthesis and Characterization of p—[Perfluoro—1—（2—fluorosulfonylethoxy）]ethylated Polystyrene

A new fluorinated polystyrene bearing a p-sulbstiuted perfluoro[1-(2-fluorosulfonylethoxy)]ethyl group was synthesized via one-electron oxidation of polystyrene by perfluoro[2-(2-fluorosulfonylethoxy)]propionyl peroxide at different peroxide to polystyrene molar ratios.The yield of perfluoroalkylation decreases with the increase of the reactant molar ratio.The modified polymer has been characterized by various techniques:the ring pefluoro[1-(2-fluorosulfonylethoxy)]ethylation has been proved by FT-IR and ^19FNMR;the X-ray photoelectron spectra(XPS) show the maximum binding energy of F18,O18,C18(two kinds of carbon atoms,namely C-H and C-F)and S2p,respectively; desulfonylation of the fluorinated polystyrene appearing at 217℃ has been found by its thermogravimetric analysis (TGA).The determinations of contact angle,refractive index and glass transition temperature of the modified polymer have disclosed that when the contact angle increases with the increase of the molar ratio,the refractive index and glass transition temperature decrease.The polydispersity values indicate that the degradation of the polymer chains did not occur during the reaction.     

Amphoteric polystyrene latex colloids: polymerization pathway and the control of particle size and potential

Amphoteric polystyrene latex colloids were prepared by the emulsifier-free emulsion polymerization of styrene. Two co-monomers, methacrylic acid (MA) (anionic) and dimethyl aminoethyl methacrylate (DMAM) (cationic) were used to promote the amphoteric nature of the resultant surfaces. Parameters such as particle size and the isoelectric point (IEP) were measured as a function of polymerization recipe. Particle size decreased with increasing initiator concentration according to the equation: log [d _w]=–0.67 log [I] + 0.316 whered _w is the weight average particle diameter andI is the concentration of initiator (potassium persulphate).The particle size also decreased with increasing temperature, increasing pH and addition of surfactant. Particle size was unaffected by the methacrylic acid content. The isoelectric point pH was decreased on decreasing initiator concentration and on increasing methacrylic acid content.The polymerization pathway was deduced to involve the cationic DMAM during the initiation phase and to involve the anionic MA as well as styrene, during the growth stage. A full polymerization pathway involving the formation of oligomeric DMAM micelles was postulated.     

聚苯乙烯型离子交换树脂的研究进展

介绍了聚苯乙烯型离子交换树脂的合成方法;综述了近年来在氯甲基化反应、Mannich反应以及磺化反应上的新进展、新理论：从结构上对聚苯乙烯型离子交换树脂的强度和热稳定性进行了分析。聚苯乙烯型离子交换树脂具有稳定的物理化学性质、吸附选择独特、再生容易、操作简便、使用周期长等优良性能,大大促进了化工企业、制药工业、环保、医疗、分析等行业的发展,具有广阔的发展前景。