二苯并噻吩在分散型钼催化剂和原位产生的氢存在下的加氢脱硫Ⅲ. 催化剂前身物、硫化氢、一氧化碳和水对反应的影响(英)

研究了水／ 甲苯乳化液中二苯并噻吩（ 硫芴） 在分散型钼酸、磷钼酸和四硫钼酸铵催化剂存在下的加氢脱硫反应． 反应在高压釜中于３４０ ℃及三种不同的气氛即Ｈ２ ,Ｈ２／Ｈ２ Ｏ和ＣＯ／Ｈ２Ｏ（ＣＯ 和Ｈ２Ｏ 经水煤气转换反应（ ＷＧＳＲ） 产生原位氢） 的存在下进行． 用ＧＣ和ＧＣＭＳ鉴定、分析了气体和液体产物的组成． 结果表明： 对硫芴的加氢脱硫反应,在分散型四硫钼酸铵催化剂存在下,原位产生的氢的效果仅比加入的氢气稍好,而在分散型钼酸和磷钼酸催化剂存在下,原位产生的氢远比加入的氢气有效． 实验结果还表明： 硫化氢能显著提高分散型钼酸和磷钼酸催化剂的加氢脱硫活性,但在分散型四硫钼酸铵催化剂存在下,硫化氢能促进加氢反应而抑制氢解反应． 一氧化碳和水均选择性地抑制氢解反应．     

从4-戊烯醛经增碳反应合成5-己烯酸甲酯类化合物(英文)

通过4,8,12-三甲基-4,8,12-三烯醛(1)类四戊烯醛衍生物的增一碳反应合成了5,9,13-三甲基-5,9,13-十四三烯醛甲酯(3)及5-己烯酸甲酯衍生物(7～9)。用甲氧基甲基三苯基膦处理4-戊烯醛类化合物生成烯基醚,PCC氧化所生成的烯醚则得到标题化合物,5-己烯酸甲酯类化合物。     

Dynamics of joint adsorption of mutually soluble substances by activated carbons

A model for the dynamics of isothermal absorption of a binary mixture of an organic substance, soluble in water, and water vapor in a fixed bed of activated carbon was proposed. It includes the equations of material balance and the Myers—Prausnitz model for equilibrium adsorption. The possibility of formation of the condensed phase during the adsorption of an organic substance on moist activated carbon was shown. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1491–1495, August, 1998.     

Electrokinetic and contact angle measurements of grafted carbon fibers

 The grafting method that has successfully been applied to methacrylic acid and liquid crystalline monomers was expanded to prepare amphoteric carbon fiber surfaces using 2-(N,N-dimethylamino)ethyl methacrylate as monomer. The obtained carbon fiber surfaces were characterized by contact angle and ζ-potential measurements. The expected basic behavior was not observed, instead an amphoteric character of the modified carbon fiber surface was found. The fiber surfaces display a basic character in the acidic pH-range, while they are acidic in the alkaline part of the pH-scale. An important influence is derived from the amount of initiator used to graft the monomers onto the fibers. The smaller the initiator concen-tration used during polymerization, the larger the amount of amino functionalities introduced to the carbon fiber surface. The wetting behavior versus water depends on the overall conformation of the immobilized polymer. During immersion into water the polymer acts hydrophobic, while during emersion, a hydrophilic character is observed, probably derived from conformational changes and swelling during the contact angle measure-ments in water. Received: 9 June 1998 Accepted: 13 August 1998     

Density of supercritical CO_2-tetrahydrofuran binary mixture and the partial molar volume of the cosolvent

The densities of supercritical CO2-tetrahydrofuran (cosolvent) binary mixture weremeasured at temperatures in range of 308.15 to 323.15 K and at pressure up to 16.5 MPa.The concentrations of tetrahydrofuran were from 0 to 0.57 mol/L.The partial molar volume of tetrahydrofuran was calculated based on the relationship between the density of the mixture and the concentration of the cosolvent.It is observed that the partial molar volume of the cosolvent is negative and the absolute value decreases with increasing pressure and the concentration of the cosolvent.     

Ultra-stable Ni catalysts for methane reforming by carbon dioxide

Methane reforming by carbon dioxide has been studied over ultra-stable Ni catalysts. The catalyst was characterized by XRD, IR and TEM and temperature programmed hydrogenation. The nickel–magnesia solid solution catalyst containing low nickel has shown excellent stability (>3000 h) and no carbon deposition in the methane reforming by carbon dioxide. It was also found that the small nickel metal particle interaction with support surface is effective for the inhibition of carbon formation.     

Basicities of alumina-supported alkaline earth metal oxides

A series of alumina-supported alkaline earth metal oxide catalysts were prepared by incipient-wetness impregnation. These catalysts were characterized by nitrogen-sorption to determine their surface areas and pore size distributions. The basicities of these catalysts were characterized by temperature-programmed desorption of carbon dioxide. The TPD results demonstrate that all of the catalysts have one-peak profiles. The basicity increases with increasing atomic number of the alkaline earth metal. The alumina-supported alkaline earth oxides exhibit the same basic properties as bulk metal oxides. However, the presence of alumina can increase the mechanical strength of the catalyst, since the alkaline earth oxides have a weak mechanical strength. The basic properties of the catalysts are strongly influenced by the calcination temperature.     

The theoretical basis of column chromatography in multicomponent separations. Part 2: Peak capacity. Column systems with good selectivity

The selectivity of a column system, S, defined by equation 28, includes a variation coefficient (β) of plate number with capacity ratio which has a large influence on the peak capacity, as shown in Fig. 18. Some typical chromatograms are given. In order to predict S for a column system from Kovat's Index, equations 40 and 41 are given to calculate the constant of the carbon number rule for squalane at different temperatures or for different stationary phases. The specific retention value of heptane on squalane at different temperatures can be calculated from equation 42. The nonpolarity index, defined by equation 43, was used to calculate the retention value of heptane on various stationary phases. In liquid chromatography, the order of elution may be reversed by changing the composition of the eluent on the same chemically bonded silica (manufactured in China). The linear relations between the log retention values of different kinds of solutes or of a single solute on the silicas of different surface areas when using the same eluent are given.     

Enthalpies of solvation for N-alkylamides in water and in carbon tetrachloride at 25°C

Molar enthalpies of solution at infinite dilution have been determined at 25°C for several N-alkyl and N,N-dialkylamides in water and in carbon tetrachloride, using a Calvet-type rotating calorimeter, and solution concentrations below 5×10^–2 molal. Relevant enthalpies of transfer between the two solvents also have been derived. Molar enthalpies of solvation have been obtained by adding enthalpies of vaporization to solution values. Results are compared with those of other laboratories on other substituted amides, and their dependence on the number of carbon atoms in the chain is discussed. A possible computation of solvation enthalpies of functional groups is suggested and results for hydration of peptide or similar groups present in the compounds examined are discussed in terms of current models of their hydration and hydrogen bond formation.Presented at the sixth Italian meeting on Calorimetry and Thermal Analysis (AICAT) held in Naples, December 4–7, 1984.     

Mechanism of the gas-phase oxidation of carbon disulfide at elevated temperatures (the C-S-O system)

Machine modeling was used to investigate the kinetic mechanism of the gas-phase oxidation of carbon disulfide at elevated temperatures. The scheme of the process examined includes 70 elementary reactions. On the basis of the kinetic data on these reactions available in the literature the rates of the oxidation process, the concentrations of end products and intermediate particles were calculated as a function of the time under various conditions (composition, pressure, temperature). Comparison of the results obtained with the experimental data showed satisfactory agreement and also revealed some important elementary reactions.N. N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, Moscow 117977. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 4, pp. 812–822, April, 1992.