Growth of oxide thin films for optical gas sensor applications

Tungsten trioxide and titanium dioxide thin films were synthesised by pulsed laser deposition. We used for irradiations of oxide targets an UV KrF* (λ = 248 nm, τ_FWHM ≅ 20 ns, ν = 2 Hz) excimer laser source, at 2 J/cm² incident fluence value. The experiments were performed in low oxygen pressure. The (0 0 1) SiO₂ substrates were heated during the thin film deposition process at temperature values within the 300-500 °C range. The structure and crystalline status of the obtained oxide thin films were investigated by high resolution transmission electron microscopy. Our analyses show that the films are composed by nanoparticles with average diameters from a few to a few tens of nm. Moreover, the films deposited at substrate temperatures higher than 300 °C are crystalline. The tungsten trioxide films consist of a mixture of triclinic and monoclinic phases, while the titanium dioxide films structure corresponds to the tetragonal anatase phase. The oxide films average transmittance in the visible-infrared spectral range is higher than 80%, which makes them suitable for sensor applications.     

Structural and electrical characterization of SxSe100−x thin films

Thin films of samples of the glassy S_xSe_100−x system with 0 ≤ x ≤ 7.28 have been prepared by thermal evaporation technique at room temperature (300 K). X-ray investigations show that the structure of pure selenium (Se) does change seriously by the addition of small amount of sulphur S ≤7.28%. The lattice parameters were determined as a function of sulphur content. Results of differential thermal analysis (DTA) of the glassy compositions of the system S_xSe_100−x were discussed. The characteristic temperatures (T_g, T_c and T_m) were evaluated. Dark electrical resistivities, ρ, of S_xSe_100−x thin films with different thicknesses from 100 to 500 nm, were measured in the temperature range from 300 to 423 K. Two distinct linear parts with different activation energies were observed. The variation of electrical resistivity of examined compositions has been discussed as a function of the film thickness, temperature and the sulphur content. The application of Mott model for the phonon assisted hopping of small polarons gave the same two activation energies obtained from the resistivity temperature calculations.     

Irreversible and reversible phase transitions of alkyl monolayers. Gas chromatographic evidence of polar solvent influence on the adsorbing properties of the layer

Summary Further to Gilpin's observations in liquid chromatography of the irreversible transformation of alkyl grafts, following the replacement of an organic mobile phase by an aqueous one, we describe some gas chromatographic experiments which lead to similar (log V_s, I/T) plots, as a consequence of the same solvent release process.We use paraffin films on siliceous supports or hydroxylated liquid substrates or C₂₂-alkyl bonded silica. These experiments demonstrate that this irreversible transition and the melting-like reversible transition are completely different phenomena. They confirm the existence of at least three kinds of monomeric alkyl films.     

Rapid Electrochemical Detection of Propranolol and Metoprolol in Pharmaceutical Preparations Using Stabilized Lipid Films

This work reports a technique for the rapid electrochemical detection of propranolol and metoprolol in pharmaceutical preparations using stabilized lipid films. Microporous filters composed of glass fibers (nominal pore sizes 0.7 and 1.0 μm) were used as supports for the formation and stabilization of these devices. The lipid film is formed on the filter by polymerization prior to its use. This stabilized after storage in air. Lipid films composed of phosphatidylcholine were used for the detection of propranolol and metoprolol in pharmaceutical preparations. The stabilized lipid membranes provided artificial ion gating events in the form of transient signals within about 60 and 34 s after exposure of the membranes to propranolol and metoprolol, respectively. The magnitude of the transient current signal was related to the concentration of propranolol and metoprolol in bulk solution in the micromolar range. The mechanism of signal generation was investigated by differential scanning calorimetric studies. These studies revealed that the adsorption of the drug is through the hydrophobic aryl terminal of the compound, whereas the hydrophilic groups were directed towards the electrolyte solution. This adsorption caused a rapid alteration of the electrochemical double layer of the lipid film (i.e., capacitance changes) that resulted in the transient ion current signal. The present technique was used for the rapid detection of propranolol and metoprolol in pharmaceutical preparations and can function for repetitive uses after storage in air. Future research is targeted to the determination of these chemicals in human biofluids such as urine of athletes.     

Surface mixed adsorption films of 2,4,6- trimethylphenol–2,4,6-trichlorophenol at aqueous solution/air interface

 The results of experimental studies of the adsorption at the solution/air interface from an aqueous mixture: 2,4,6-trimethylphenol–2,4,6-trichlorophenol are presented. The surface properties of the above-mentioned mixture were studied by surface potential and surface tension measurements. These measurements were carried out as a function of the concentration of 2,4,6-trimethylphenol aqueous solution at a constant concentration of 2,4,6-trichlorophenol. Using the results obtained and based on the Gibbs equation, Helmholtz formula and Motomura’s method the relative surface excesses of adsorbed substances, effective dipole moments, surface molar fractions of solutes and miscibility of adsorbed films were determined. Received: 7 November 1997 Accepted: 26 February 1998     

The studies of the effect of photostimulated changes in thin carbon films

Photostimulated changes in thin carbon films deposited onto fused silica substrates by reactive magnetron sputtering and irradiated by the light of the first (1060nm) and the second (530nm) harmonics of a QW-switched Nd³⁺ AVG laser were investigated. The changes are supposed to be connected with the reordering of chemical bounds.     

Matrix-isolation-FTIR spectroscopy with an integrating sphere

The use of an integrating sphere for the measurement of absorption spectra of thin films is described. The thin film (for example a rare gas matrix) is grown directly on the inside surface of the sphere. Multiple reflections inside the integrating sphere lead to significant enhancement of weak absorptions of the film, increasing the sensitivity of such measurements.     

Quantitative separation of zinc traces from cadmium matrices by solid-phase extraction with polyurethane foam

A system for separation of zinc traces from large amounts of cadmium is proposed in this paper. It is based on the solid-phase extraction of the zinc in the form of thiocyanate complexes by the polyurethane foam. The following parameters were studied: effect of pH and of the thiocyanate concentration on the zinc extraction, shaking time required for quantitative extraction, amount of PU foam necessary for complete extraction, conditions for the separation of zinc from cadmium, influence of other cations and anions on the zinc sorption by PU foam, and required conditions for back extraction of zinc from the PU foam. The results show that zinc traces can be separated from large amounts of cadmium at pH 3.0±0.50, with the range of thiocyanate concentration from 0.15 to 0.20 mol l⁻¹, and the shaking time of 5 min. The back extraction of zinc can be done by shaking it with water for 10 min. Calcium, barium, strontium, magnesium, aluminum, nickel and iron(II) are efficiently separated. Iron(III), copper(II) and cobalt(II) are extracted simultaneously with zinc, but the iron reduction with ascorbic acid and the use of citrate to mask copper(II) and cobalt(II) increase the selectivity of the zinc extraction. The anions nitrate, chloride, sulfate, acetate, thiosulphate, tartarate, oxalate, fluoride, citrate, and carbonate do not affect the zinc extraction. Phosphate and EDTA must be absent. The method proposed was applied to determine zinc in cadmium salts using 4-(2-pyridylazo)-resorcinol (PAR) as a spectrophotometric reagent. The result achieved did not show significant difference in the accuracy and precision (95% confidence level) with those obtained by ICP–AES analysis.     

Mechanical behaviour of biodegradable agricultural films under real field conditions

The mechanical behaviour of various types of biodegradable materials depends on their chemical composition and additives, the processing characteristics and the application conditions. The environmental conditions during storage and usage of these materials strongly influence their mechanical properties and behaviour. Ageing and degradation during the useful lifetime of biodegradable agricultural films causes losses in the mechanical performance of the material, as measured by monitoring the evolution of some of the critical mechanical properties. Such losses may be comparable to the corresponding losses of the conventional polyethylene agricultural films due to ageing, or they may be more drastic. In the present paper, the overall mechanical and ageing/degradation behaviour of experimental specially designed and manufactured low-tunnel and mulching biodegradable films, exposed to full-scale field conditions is analysed. Selected critical mechanical properties of these films manufactured with different grades of Mater-Bi material and additives, different thickness and processing schemes and exposed to real cultivation conditions in four different locations in Europe are investigated in the laboratory and compared against the corresponding behaviour of conventional agricultural films at various stages of their exposure time.