Investigation on crystalline structure and dielectric relaxation behaviors of hot pressed poly(vinylidene fluoride) film

The dielectric relaxation behaviors of hot pressed poly(vinylidene fluoride) (PVDF) film have been studied using dielectric spectroscopy in the frequency domain from 20 Hz to 5 MHz at temperatures between 20 °C and 200 °C. Crystalline/amorphous interphase is suggested with methods of FTIR, XRD, and DSC. Frequency and temperature dependence of dielectric spectroscopy reveals the relaxation behavior and structural dynamics of the samples, and three types of relaxation processes are suggested, α_Ac relaxation process contributed by the hopping transport process near the periphery of conduction band or valence zones at Fermi energy, α_c relaxation process related to the structure change of crystal lattice trapped dipoles in crystalline regions, and α_a relaxation process arising from segmental dipole rearrangement of interphases in amorphous regions. Cole-Cole and Havriliak-Negami experimental equations were utilized to analyze these relaxation processes, and differences of Arrhenius parameters for α_Ac and α_c relaxation processes obtained from Cole-Cole and Havriliak-Negami equations were discussed in detail. Activity energy of different relaxation processes obtained from Arrhenius equation and VFT equation indicates non-single thermal activation mechanism for hot pressed PVDF film.     

一种模拟热导率的非平衡分子动力学方法

提出一种计算热导率的非平衡分子动力学(NEMD)方法,通过构造均匀内热源获得抛物线形温度分布,并基于Fourier导热定律计算热导率,与Müller-Plathe发展的反扰动非平衡分子动力学(RNEMD)方法相比,不仅具有能量动量守恒和收敛性好的优点,还克服了常规NEMD方法中热冷源区域存在局域热力学非平衡的问题,并有模拟系统温差影响小的特点.对液态氩的热导率进行模拟并与RNEMD方法的模拟结果进行对比.     

A model for the thermal conductivity of nanofluids – the effect of interfacial layer

A model for predicting the effective thermal conductivity of nanofluids is proposed. It has been documented that the interfacial layer at the solid (particle)/liquid interface and particle size is one of the major mechanisms for enhancing the thermal conductivity of nanofluids. Comparing with other classical models, the proposed model takes into account some additional effects including volume fraction, thickness, thermal conductivity of the interfacial layer and particle size. The proposed model is found to be better than the existing models since the predicted effective thermal conductivity of different types of nanofluids are closer to the experimental results.     

测量金属导线热导率的新方法

用双臂电桥测量一定温度下铜导线的电阻,进而计算得到铜线的电导率,再根据维德曼-夫兰兹定律得到铜线的热导率.     

Structure, electric and dielectric studies of indium-substituted magnesium copper manganese ferrites

The structure, electric and dielectric properties of In-substituted Mg-Cu-Mn ferrites having the general formula of Mg_0.9Cu_0.1Mn_0.1In_xFe_1.9−xO₄ with 0.0≤x≤0.4 have been studied. X-ray diffraction (XRD) patterns of the samples indicated the formation of single-phase cubic spinel structure up to 0.2 and mixed phase (cubic and tetragonal phase) for samples x≥0.3. The relation of conductivity with temperature revealed a semiconductor to semimetal behavior as In⁺³ concentration increases. Variation in the universal exponent s with temperature indicates the presence of two hopping conduction mechanisms: the correlated barrier hopping (CHB) at low In⁺³ content x≤0.1 and small-polaron (SP) hopping at In⁺³ content x≥0.2. The variation in dielectric permittivity (ε′, ε″) with temperature at different frequencies shows a normal behavior for the studied compounds, while the variation in dielectric loss tangent with frequency at different temperatures shows abnormal behavior with more than relaxation peak. The conduction mechanism used in the present study has been discussed in the light of electron exchange between Fe³⁺ and Fe²⁺ ions and hole hopping between Mn²⁺ and Mn³⁺ ions at the octahedral B-sites.     

利用液体夹心法测量LiF单晶高压热导率

提出了液体夹心法热导率测量技术, 采用CHBr3液体作为夹心材料实现了样品/窗口界面的理想接触, 并将动载荷作用下的夹心法高压热导率实验测量压力下限拓展至40 GPa, 为绝缘介电晶体高温高压热导率测量提供了技术支持. 实验利用平面碰撞和DPS测试技术, 结合液体夹心法实测了LiF单晶高压热导率数据, 对现有热导率理论模型进行了研究和探讨, 结果显示, 在γ/γ0=(ρ0/ρ)2时, 修正后的Roufosse理论公式与实验数据符合较好, 这一研究结果为非透明材料冲击波温度测量中的热传导修正提供了实验数据和理论模型。     

单晶硅薄膜法向热导率分子动力学研究

采用非平衡分子动力学方法（NEMD）研究了平均温度为 500K、厚度为 2～32nm的单晶硅薄膜的法向热导率。模拟结果表明,薄膜热导率显著低于对应温度下的体硅单晶的实验值,并随膜厚度减小以接近线性的规律减小。用声子气动力论模型的分析结果与NEMD模拟相一致,表明纳米单晶硅薄膜中声子平均自由程显著减小。     

Radiation-induced changes in electrical conductivity and structure of BaPbO3 after γ-irradiation

Several barium plumbate (BaPbO₃) solid samples, made from PbO and BaCO₃ powder by chemistry liquid-phase coprecipitation, were investigated before and after γ-irradiation. The solid samples were irradiated by a ⁶⁰Co γ-irradiation source whose dose rate is about 0.7?kGy per hour. The irradiation times were 0, 72, 144, 216, 288 and 360?h. Then, the four-probe method, X-ray diffraction (XRD), scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) were used to indicate the changes in electrical conductivity and microstructure of BaPbO₃ after γ-irradiation. The XRD results indicated that the content of PbO was reduced as the irradiation dose was increased and eventually vanished from the surface of samples. However, there was no new obvious substance phase found from the XRD atlas. It seems that the PbO transformed into nearly amorphous Pb₅O₈. The conjecture could be proved by the results of annealing experiment and SEM. The XPS results seem to show that the microstructure of BaPbO₃ was slightly changed.     

Ionic conductivity of PVdF-co-HFP/LiClO4 in terms of free volume defects probed by positron annihilation lifetime spectroscopy

ABSTRACT

Polymers based on ionic conducting materials have important interest because of their potential applications in polymer electrolytes and membranes for fuel cell application. PVdF-co-HFP poly(viniliden-co-hexafluoropropylene) was chosen as a polymer matrix because of its high ionic conductivity and better mechanical properties. Polymer matrix composites were prepared with various amounts of LiClO₄ salt by a solution casting method. The sample-ionic conductivity measurements were recorded by AC impedance analyzer at different frequencies from 0.1?Hz to 20?MHz and at different temperatures from 273 to 373?K.

The changes of nanoscopic free volume and free volume fraction in these materials were investigated in terms of temperature from 273 to 373?K using Positron Annihilation Lifetime Spectroscopy (PALS) and Simha-Somcynsky (SS) Hole Theory. The free volume had a bump at about 3% in weight percentage of the salt and there is a slight increase after 10%. The effects of weight percentages of LiClO₄ and temperature were investigated. The mechanism of the ac ionic conductivity was presented in terms of the free volume models, however thermo-occupancy function justifies the best accurate representation of the data.     

γ-irradiation effect on the spectroscopic and electrical properties of K2SO4—Na2SO4 mixed system

Abstract

Measurements of electron paramagnetic resonance, infrared and electrical properties were carried out for the K₂SO₄—Na₂SO₄ mixed system before and after γ-irradiation. EPR measurements revealed the presence of a quartet of lines characterized by an isotropic g-value of 2.0034. These lines are mainly attributed to the formation of a SO^? ₃ center which results from the interaction of γ-rays with the sulfate ion. A decrease in the absorption intensity of the Infrared radiation was observed after γ-irradiation due to radiation damage in the sulfate group. The electrical conductivity, σ, was measured for the K₂SO₄—Na₂SO₄ system before and after γ-irradiation in the temperature range from 30 up to 430°C. A considerable decrease in the conductivity value accompanied by an increase in the activation energy was observed after γ-irradiation. The energy of formation of Frenkel defects was estimated to be 2.94eV. The current-voltage characteristics were measured at different temperatures in order to estimate the type of conduction in the samples. Isothermal annealing kinetics was investigated at different temperatures before and after γ-irradiation. The electrical conductivity decreases with increasing time of annealing and the annealing process is dominated by a unique rate process.