多胞材料的力学行为

多胞材料具有独特的力学性质,其工程应用日益增加.人造多胞材料可以分为蜂窝材料和泡沫材料两类.本文介绍了这两类材料在不同载荷条件下力学行为的研究概况.对于某些天然材料(木材和松质骨)的多胞结构及其模型也作了简要介绍.     

泡沫铝合金填充圆管三点弯曲实验研究

用实验方法研究了三种不同管壁厚度、两种跨径的泡沫铝合金填充圆管的三点弯曲力学性能,得到了泡沫铝合金填充管结构承载过程中的三种变形模式,即压入、压入弯曲和管壁下缘拉裂破坏。给出了空管和泡沫铝合金填充管的载荷位移曲线,并进行了比较。实验发现泡沫铝合金填充管结构的承载能力随泡沫铝合金密度的增大而增大,但破坏应变则随之减小。结构承载力的相对提高量随着管壁厚度的减小和跨径的增大而增大。此外,分析了泡沫铝合金提高填充管结构承载能力的机理。泡沫铝合金填充使管壁压入量和管截面抗弯刚度的损失显著减小,从而提高了结构的抗弯能力。     

Surfactant Concentration and End Effects on Foam Flow in Porous Media

Foaming injected gas is a useful and promising technique for achieving mobility control in porous media. Typically, such foams are aqueous. In the presence of foam, gas and liquid flow behavior is determined by bubble size or foam texture. The thin-liquid films that separate foam into bubbles must be relatively stable for a foam to be finely textured and thereby be effective as a displacing or blocking agent. Film stability is a strong function of surfactant concentration and type. This work studies foam flow behavior at a variety of surfactant concentrations using experiments and a numerical model. Thus, the foam behavior examined spans from strong to weak.Specifically, a suite of foam displacements over a range of surfactant concentrations in a roughly 7m², one-dimensional sandpack are monitored using X-ray computed tomography (CT). Sequential pressure taps are employed to measure flow resistance. Nitrogen is the gas and an alpha olefin sulfonate (AOS 1416) in brine is the foamer. Surfactant concentrations studied vary from 0.005 to 1wt%. Because foam mobility depends strongly upon its texture, a bubble population balance model is both useful and necessary to describe the experimental results thoroughly and self consistently. Excellent agreement is found between experiment and theory.     

Modeling and prediction of bulk properties of open-cell carbon foam

The emerging ultralightweight material, carbon foam, was modeled with three-dimensional microstructures to develop a basic understanding in correlating microstructural configuration with bulk performance of open-cell foam materials. Because of the randomness and complexity of the microstructure of the carbon foam, representative cell ligaments were first characterized in detail at the microstructural level. The salient microstructural characteristics (or properties) were then correlated with the bulk properties through the present model. In order to implement the varying anisotropic nature of material properties in the foam ligaments, we made an attempt to use a finite element method to implement such variation along the ligaments as well as at a nodal point where the ligaments meet. The model was expected to provide a basis for establishing a process-property relationship and optimizing foam properties.The present model yielded a fairly reasonable prediction of the effective bulk properties of the foams. We observed that the effective elastic properties of the foams were dominated by the bending mode associated with shear deformation. The effective Young's modulus of the foam was strongly influenced by the ligament moduli, but was not influenced by the ligament Poisson's ratio. The effective Poisson's ratio of the foam was practically independent of the ligament Young's modulus, but dependent on the ligament Poisson's ratio. The effective Young's modulus of the carbon foam was dependent more on the transverse Young's modulus and the shear moduli of the foam ligaments, but less significantly on the ligament longitudinal Young's modulus. A parametric study indicated that the effective Young's modulus was significantly improved by increasing the solid modulus in the middle of the foam ligaments, but nearly invariant with that at the nodal point where the ligaments meet. Therefore, appropriate processing schemes toward improving the transverse and shear properties of the foam ligaments in the middle section of the ligaments rather than at the nodal points are highly desirable for enhancing the bulk moduli of the carbon foam.     

以泡沫镍载NiCo2O4纳米线阵列为阴极催化剂的Al-H2O2半燃料电池

研究了以泡沫镍载NiCo2O4纳米线阵列为阴极催化剂的Al-H2O2半燃料电池的性能. 以无模板生长法制备了泡沫镍载NiCo2O4纳米线阵列阴极材料, SEM测定结果表明, NiCo2O4纳米线几乎垂直于泡沫镍载体表面生长. 以电压和功率密度-电流密度曲线研究了H2O2浓度、电解液流速和温度对电池性能的影响, 结果显示, 以铝片为阳极, 0.6 mol/L H2O2为氧化剂的电池的开路电压约为1.40 V; 在室温和57 ℃下, 电流密度为98和172 mA/cm2时, 最大功率密度分别达到79和120 mW/cm2.  在5000 s的测试时间内, 0.70 V的恒电流密度和75 mA/cm2 的恒电压值几乎为一常数, 这表明以泡沫镍载NiCo2O4纳米线阵列为催化剂电还原H2O2具有很好的活性、稳定性和传质性能.     

可膨胀石墨阻燃高回弹聚氨酯泡沫塑料的性能

在原料中添加可膨胀石墨(EG),采用一步法合成了阻燃型高回弹聚氨酯软泡,研究了EG对泡沫性能的影响.用扫描电镜和光学显微镜观察了EG粒子在泡沫内的固着状态及其对泡孔形貌和泡沫燃烧后的炭层形貌的影响.垂直-水平燃烧实验和极限氧指数实验检测了EG的添加量对于泡沫燃烧的抑制情况.考察了EG粒子的含量对泡沫密度、拉伸及压缩力学...     

Assessment of the degradation of polyurethane foams after artificial and natural ageing by using pyrolysis-gas chromatography/mass spectrometry and headspace-solid phase microextraction-gas chromatography/mass spectrometry

Polyurethane foams are widely present in museum collections either as part of the artefacts, or as a material for their conservation. Unfortunately many of PU foam artefacts are in poor condition and often exhibit specific conservation issues. Their fast thermal and photochemical degradations have been the aim of previous researches. It is now accepted that hydrolysis predominates for polyester-based polyurethane PU(ES) whereas oxidation is the principal cause of degradation for polyether-based polyurethane PU(ET) variety. Only a few studies have been devoted to volatile organic compounds (VOCs) emitted by polyurethanes and, to our knowledge, none were performed on polyurethane foams by using headspace-solid phase microextraction (HS-SPME). The objective of the work described here is to assess the impact of some environmental factors (humidity, temperature and daylight) on the degradation of PU foams by evaluating their volatile fractions. We investigated morphological changes, polymerized fractions and volatile fractions of (i) one modern produced PU(ES) foam and one modern PU(ET) foam artificially aged in different conditions as well as (ii) four naturally aged foams collected from various daily life objects and selected for the representativeness of their analytical data. Characterization procedure used was based on attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) and non-invasive headspace solid-phase microextraction coupled with gas chromatography and mass spectrometry (HS-SPME-GC/MS). In this paper, the formation of alcohol and acid raw products for PU(ES) and glycol derivatives for PU(ET) during natural and artificial ageing is confirmed. These main products can be considered as degradation markers for PU foams. Results show that artificial and natural ageing provide similar analytical results, and confirm that the dominant degradation paths for PU(ES) and for PU(ET) are hydrolysis and photo-oxidation, respectively. Lastly, we highlight that non-invasive HS-SPME-GC/MS analysis allows to distinguish between PU(ES) and PU(ET) at any point of their degradations.     

泡沫铝冲击吸能器被动冲击隔离技术研究

对隔振系统中引入泡沫铝冲击吸能器进行探讨.首先,在综合考虑最大加速度和最大相对位移这2个影响舰船设备防护的重要指标情况下,对舰船单层隔振系统中引入泡沫铝冲击吸能器进行了理论分析,在此基础上进行了实验验证.通过实验结果可知,泡沫铝冲击吸能器能有效消除舰船设备的二次冲击.实验结果与理论结果吻合较好,可为泡沫铝冲击吸能器的应...     

JSOG中水蒸汽含量的模拟计算

氧碘化学激光（简称 COIL）系统中，水是影响激光功率输出的最重要的原因之一。气流中的水不仅对激发态碘原子有严重的猝灭作用，另外对碘分子解离、超音速流动特性也有很坏的负面作用。单重态氧发生器的BHP（Basic Hydrogen Peroxide ）溶液是最主要的水蒸汽源。利用传质模型对射流式单重态氧发生器（简称JSOG）中产生的水蒸汽进行了计算，所得的数值结果与实验测量结果基本相符。根据模拟结果，对发生器的设计及实验条件进行了优化。     

Experimental investigation of supersonic radiation propagation in low-density plastic and copper-doped foams

1 Introduction The investigation of supersonic radiation wave transporting in low density foam pro-duced by thermal radiation is of crucial importance in inertial confinement fusion (ICF) research[1]. When the intense radiation flux is incident in the media, first, a supersonic heat wave is formed which propagates into the undisturbed material. In time, due to the increasing mass of heated material, it slows down and is overtaken by a shock wave,thus becoming of the ablative type. Normally, …