Fluorinated Porous Poly(spirobifluorene) Via Direct C‒H Arylation: Characterization,Porosity, and Gas Uptake

Considering intrinsic properties of conjugated polyfluorenes and special functions of porous polymers, synthesis of fluorinated porous poly(spirobifluorene) via direct C?H arylation polycondensation is explored. Owing to the contorted structure and cross-linking nature, the obtained polymer FPSBF shows permanent porosities with Brunauer–Emmett–Teller specific surface area up to 700 m² g^?1 and exhibits a narrow pore size distribution with the dominant pore size at about 0.63 nm, which is more suitable for adsorption of small gas molecules. Based on the measured gas physisorption isotherms with pressure up to 1.13 bar, the obtained polymer shows good uptaking capacities for hydrogen (1.30 wt% at 1.0 bar and 77 K) and methane (4.80 wt% 1.0 bar and 273 K). Moreover, FPSBF has significant adsorption selectivity for CH₄ against N₂ and the estimated ideal adsorption selectivity ratio is up to 30/1 at 1.0 bar and 273 K, which makes the material possess potential application in gas separation.     

Supramolecular heterogeneity in β-turn forming synthetic tripeptides nucleated by isomers of fluorinated phenylalanine and aib as corner residues

The influences of fluorines in chemistry have emerged as a breakthrough in various arenas of bio-organic and medicinal chemistry. But its incorporation in β-turn design and its implications for supramolecular chemistry remains in a rudimentary stage. Inspired by the diversity displayed by the isomers of mono-fluorinated phenylalanine in biological sciences, here our effort is to modulate the solid state conformational analysis of three terminally protected synthetic tripeptides Boc-(Y)-F-Phe-Aib-Xaa-OMe, where (Y is (2)-F-Phe, Xaa; Leu in peptide I, (3)-F-Phe, Xaa; Leu in peptide II and (4)-F-Phe, Xaa; Ile in peptide III). Interestingly, all the three peptides display a conformational preference for β-turns, stabilized by 4→1 intramolecular hydrogen bonding. Our investigation further demonstrates that mere interchange of positions of fluorines in mono-fluorinated phenylalanine in peptides I–III introduces significant diversity in supramolecular chemistry. X-ray crystallography sheds some light at atomic resolution. Furthermore, this supramolecular heterogeneous behavior is evident from the morphologies obtained from the materials of all the three peptides grown from acetone to petroleum ether solution, studied by field emission scanning electron microscopy. Thus, these monofluorinated peptides I–III may serve as prominent candidates in understanding the structure and function of misfolded disease causing peptides like prion and Alzheimer's amyloid.     

Study on the Interaction Between Bovine Serum Albumin and Potassium Perfluoro Octane Sulfonate

The interactions between potassium perfluorooctanesulfonate (PFOS) and bovine serum albumin (BSA) were studied by fluorescence spectroscopy. The association constants between PFOS and BSA were obtained by fluorescence enhancing and fluorescence quenching respectively. Furthermore, fluorescence quenching was studied at different temperatures, and the binding constant was also determined by the method of fluorescence quenching. According to the thermodynamic parameters, the main binding force could be judged. The experimental results revealed that BSA and PFOS had strong interactions. The mechanism of quenching belonged to dynamic quenching and the main sort of binding force was hydrophobic force. IR-spectra proved the interaction changed the conformation of BSA.     

Stable and Storable N(CF3)2 Transfer Reagents

Fluorinated groups are essential for drug design, agrochemicals, and materials science. The bis(trifluoromethyl)amino group is an example of a stable group that has a high potential. While the number of molecules containing perfluoroalkyl, perfluoroalkoxy, and other fluorinated groups is steadily increasing, examples with the N(CF₃)₂ group are rare. One reason is that transfer reagents are scarce and metal-based storable reagents are unknown. Herein, a set of Cu^I and Ag^I bis(trifluoromethyl)amido complexes stabilized by N- and P-donor ligands with unprecedented stability are presented. The complexes are stable solids that can even be manipulated in air for a short time. They are bis(trifluoromethyl)amination reagents as shown by nucleophilic substitution and Sandmeyer reactions. In addition to a series of benzylbis(trifluoromethyl)amines, 2-bis(trifluoromethyl)amino acetate was obtained, which, upon hydrolysis, gives the fluorinated amino acid N,N-bis(trifluoromethyl)glycine.     

An Endo-Selective Epoxide-Opening Cascade for the Fast Assembly of the Polycyclic Core Structure of Marine Ladder Polyethers

The rapid synthesis of marine ladder polyethers from polyepoxide precursors (in analogy with the biosynthetic pathway hypothesized by Nakanishi) is hampered by the fact that the exo-selective epoxide-opening cyclization cascade that gives THF-type polyethers is preferred over the endo-selective cascade that gives the desired products. We found that perfluoro-tert-butanol (PFTB) cooperating with 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM]BF₄) can promote endo-selective epoxide-opening cyclization reactions of trisubstituted epoxy alcohols. Starting from readily accessible homochiral polyepoxy alcohols with a methyl group at all the endo-cyclization sites, we were able to construct polyethers up to five consecutive fused 6-, 7-, and/or 8-membered rings in one step. Notably, molecules with the 7/7/6/6 and 7/7/6/7/6 polyether frameworks of hemibrevetoxin B and brevenal, respectively, could be synthesized in 40 % and 17 % chemical yields.     

Synthesis and surface properties of novel fluorinated polyurethane base on F‐containing chain extender

A novel fluorinated chain extender, (1‐(ethyl(2‐hydroxyethyl)amino)‐3‐ ((3,3,4,4,5,5,6,6,7,7,8,8,8‐tridecafluorooctyl)oxy)propan‐2‐ol) (FPO), was synthesized and characterized by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), and elemental analysis. Poly (ether urethane)s containing various amounts of the chain extender with fluorinated side chains (FPUs) were prepared by isophorone diisocyanate (IPDI), polytetra‐methylene‐ether‐glycol (PTMG), 3‐aminopropyltriethoxysilane (KH‐550), and 1,4‐butandiol (BDO). Films of FPUs were investigated by water absorption, contact angle, pencil hardness, adhesive force, and thermal analysis. Coating FPUs on micro‐nano concave‐convex structure plate realizes superhydrophobic performance. Scanning electron microscope (SEM) and atomic force microscopy (AFM) demonstrated that there is a lot of irregular concave‐convex structure, which forms a typical air cushion model. X‐ray photoelectron spectroscopy (XPS) analysis showed that surface fluorine content is 165% more than that of film average fluorine content. The superhydrophobic plate with 10% or higher F‐containing FPUs coating is of outstanding chemical corrosion resistance, excellent solvent resistance, and wear resistance.     

Building an Air Stable and Lithium Deposition Regulable Garnet Interface from Moderate‐Temperature Conversion Chemistry

Garnet‐type electrolytes suffer from unstable chemistry against air exposure, which generates contaminants on electrolyte surface and accounts for poor interfacial contact with the Li metal. Thermal treatment of the garnet at >700 °C could remove the surface contaminants, yet it regenerates the contaminants in the air, and aggravates the Li dendrite issue as more electron‐conducting defective sites are exposed. In a departure from the removal approach, here we report a new surface chemistry that converts the contaminants into a fluorinated interface at moderate temperature <180 °C. The modified interface shows a high electron tunneling barrier and a low energy barrier for Li⁺ surface diffusion, so that it enables dendrite‐proof Li plating/stripping at a high critical current density of 1.4 mA cm^?2. Moreover, the modified interface exhibits high chemical and electrochemical stability against air exposure, which prevents regeneration of contaminants and keeps high critical current density of 1.1 mA cm^?2. The new chemistry presents a practical solution for realization of high‐energy solid‐state Li metal batteries.     

Fluorinated Alcohols: Magic Reaction Medium and Promoters for Organic Synthesis

Fluorinated alcohols have been widely used in the synthetic organic chemistry over the past decades. The unique properties such as the strong hydrogen‐bonding donor ability and low nucleophilicity allow them to promote organic reactions in the absence of any catalyst. These approaches have distinct advantages in terms of operational simplicity, practicability and environmental friendliness. Reactions promoted by fluorinated alcohols, including nucleophilic substitution reactions, annulation reactions, electrophilic reactions, dearomatization reactions, functionalization of multiple bond, epoxidation reactions and miscellaneous reactions have been summarized in this account.     

Structural Diversity of Silver Fluorinated β-Diketonates: Effect of the Terminal Substituent and Solvent

In order to demonstrate the role of the fluorination and some solvents in the structural organization of the Ag(I) coordination polymers with β-diketonate ligands (R¹C(O)C_αHC(O)R²)⁻ we synthesized a series of the compounds containing tfac- (R₁ = CH₃, R² = CF₃) and pfpac- (R₁ = CH₃, R² = C₂F₅) anions. Solvent-free [Ag(L)]_∞ (L = tfac 1, pfpac 2) compounds and the corresponding acetonitrile and toluene adducts have been characterized by elemental analysis and/or NMR, IR and single-crystal XRD. This series includes five new coordination polymers. Compound 1 is a 3D coordination framework based on Ag–O_{chelate/bridge}, Ag–C_α bonds, and argentophilic interactions. An increase in the fluorinated group leads to a chain coordination polymer 2 of an unusual structural organization. These chains can be represented as a “DNA-type”, where two intertwined helices based on Ag–O_chelate and Ag–C_α bonds are connected through Ag–O_bridge ones. Two structural types of chain coordination polymers, [Ag(tfac)(CH₃CN)] and [Ag₂(L)₂(solvent)], have been revealed for the adducts. The latter structural type differs significantly from the previously studied toluene and acetonitrile adducts of fluorinated Ag(I) β-diketonates of the same stoichiometry. Thermal analysis in helium showed that both 1 and 2 decompose to metallic silver with the compound of pfpac-ligand being slightly more stable.     

Determination of fluorinated surfactants and their metabolites in sewage sludge samples by liquid chromatography with mass spectrometry and tandem mass spectrometry after pressurised liquid extraction and separation on fluorine-modified reversed-phase sorbents

An analytical method was elaborated for simultaneous extraction and determination of fluorinated anionic and non-ionic surfactants in sewage sludge. Surfactant compounds were determined by liquid chromatography-mass spectrometry (LC-MS) after Soxhlet extraction, hot steam extraction and pressurised liquid extraction (PLE) using spiked sludge samples. PLE in a multiple-step procedure consisting of sequential use of ethyl acetate-dimethylformamide and methanol-phosphoric acid resulted in the most efficient extraction procedure. Quantitative analyses of the fluorinated anionic perfluorooctanesulfonate (PFOS) and the partly fluorinated non-ionic alkylpolyglycol ether (FAEO) surfactants were performed by selected ion monitoring LC-MS. Electrospray ionisation or atmospheric pressure chemical ionisation in negative or positive mode was performed. Recoveries between 105 and 120% could be reached. No PFOS and non-ionic FAEO surfactants in concentrations higher than 6 or 10 mg kg(-1) dry matter were observed in real environmental samples. Therefore aerobic and anaerobic biodegradation was performed to investigate the fate of fluorinated surfactants reaching wastewaters. Biological wastewater treatment in laboratory scale under aerobic or anaerobic conditions led to an elimination by biodegradation.