The effect of calcining conditions on the rehydration of dead burnt magnesium oxide using magnesium acetate as a hydrating agent

Summary Magnesium oxide was produced through calcination of magnesite ore. A rehydration percentage of MgO to Mg(OH)₂ of higher than 60% is obtained using calcination temperatures of 1000°C and below. At these temperatures medium reactive MgO was formed. The extend to which dead burnt MgO (obtained after calcination at 1200°C and higher) may be rehydrated is dependent on the calcination time, but even after 1 h and using magnesium acetate as a hydrating agent only 40% of the initial product has rehydrated to Mg(OH)₂. After 4 and more hours of calcinations at 1200°C, a maximum of approximately 14% of the initial MgO is rehydrated back to Mg(OH)₂. Thermogravimetric analysis was performed on the various compounds to determine the amounts of Mg(OH)₂ that formed.     

The Crystal Structure of Pb8FeIIFeF24: an ordered Fluorite-like Compound

Pb₈Fe^IIFeF₂₄ is triclinic: a = 20.118(3) Å, b = 5.597(1) Å, c = 9.440(2) Å, α = 89.75(2)°, β = 105.79(2)°, α = 89.38(2)°, Z = 2. The structure is solved in the unconventional space group C1 , from X-ray single crystal data using 1 641 independent reflections (R = 0.048, R_w = 0.051). It is built up from the stacking of two subnetworks along the a axis: fluorite-like [Pb₈F₁₀]_n⁶ⁿ⁺ layers and infinite dimetallic [Fe^IIFeF₁₄]_n^6n? double-chains of corner-sharing octahedra running along the b axis.     

液膜法处理含氟废水

为了防止含氟废水的污染,人们研究了多种除氟方法,液膜技术是一项新的分离工艺,它操作简单,试剂用量少,有机相可重复利用。本文利用伯胺作迁移载体处理高含量的含氟废水,分离效率较好。 伯胺N_(1923)(简写RNH_2)为流动载体,上胺N_(205)(上海石油化工厂)为表面活性剂,煤油为溶剂。将内相CaCl_2,溶液与油相(含N_(1923)、N_(205)和煤油)按一定体积比例混合,高速搅拌,制成W/O     

Synthesis of N-unsubstituted ketene aminals from β-ketocarboxylic esters and cyanamide

The interaction of cyanamide with -ketocarboxylic esters in the presence of Ni(acac)₂ affords N-unsubstituted aminals of acyl(alkoxycarbonyl)ketenes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 419–421, February, 1993.     

KZnF3：Eu^3＋单晶生长及光谱特性

利用Ｂｒｉｄｇｍａｎ－Ｓｔｏｃｋｂａｒｇｅｒ方法在氩气气氛下生长出ＫＺｎＦ３：Ｅｕ＾３＋单晶，测定了晶体的激发光谱、荧光发射光谱和ＥＳＲ谱，讨论了Ｅｕ离子的取代格位。     

酰胺型萃取剂N-503的合成

酰胺型萃取剂N-503[N,N-二-(1-甲基庚基)乙酰胺]可以用甲庚醇或2-氯代辛烷为原料来合成。它的重要中间体二-(1-甲基庚基)胺的制备方法有二:一是从甲庚醇制备的方法,将甲庚醇用阮来镍催化,常压氨解,得率95～99％左右;二是从2-氯代辛烷制备,此法需要高压设备,得率35％左右。第一个方法在扩大试验中,产率和产品质量都比较好,是一个较好的制备长碳链仲胺的方法。     

药用缓释辅料——羟丙基甲基纤维素的合成及其缓释性能的研究

本文研究了药物缓释材料HPMC的合成方法,探讨了碱纤维素制备,醚化剂浓度,混合醚化剂配经以及产品后处理对高粘度HPMC的影响。本文还初步对KCl,氨茶碱,硝酸异山梨醇酯等药物采用合成的HPMC作辅料,进行了缓释制剂的研究,结果表明合成的HPMC具有满意的缓释性能。     

AN INVESTIGATION ON THE ab initio CALCULATION OF INTERMOLECULAR INTERACTION——NON-BONDED INTERACTION IN THE HYDROGEN BOND COMPLEX (HF)_2

An ab initio calculation of the hydrogen bond complex (HF)_2 is given with the 6-311 G~(**) basis set, according to which the potential surface around the balance point of the distancès and the orientations between two HF molecules is obtained. The atomic charges in the system are calculated with the PD/LSF method (potential-derived/least-square-fitting method) and then an analysis of the hydrogen bond interaction between two HF molecules is given with the (exp-6-1) potential function, by means of which it is shown that the main interaction between them is not an electro-static but a charge transfer one. The potential curve between two HF molecules is like a Morse function.     

合成CFC-12替代物HFC-134a的CrF3/AlF3催化剂的研究

考察了不同反应条件下ＨＣＦＣ－１３３ａ与ＨＦ在ＣｒＦ３／ＡｌＦ３催化剂作用下生成ＨＦＣ－１３４ａ的反应性能。需用ＧＣ－ＦＴＩＲ方法鉴定了产物的组成，探讨了副产物形成的原因，并进行了催化剂的稳定性试验。结果表明在ＨＦ／ＨＣＦＣ－１３３ａ流量比为１０和３５０℃和条件下，得到了较高的转化率和选择性。     

胺型键合反相固定相的制备及评价

首次将一种新型硅烷偶联剂--β-（3，4-环氧环已基）乙基三甲氧基硅烷（β-ECTS）与辛胺反应，然后再键合到硅胶上，得到了胺型键合固定相，并用元素分析、^13C固体核磁共振、红外光谱进行了表征。以甲醇和水为二元流动相，用包括碱性、酸性和中性有机化合物在内的混合物对该固定相进行评价，并考察了该填料的适用pH范围及水解稳定性。结果表明，该固定相具有较好的色谱性能，且在pH=2-8之间稳定性能良好，可有效地用于碱性化合物的分析分离。