Bare polyprolylene hollow fiber as extractive phase for in‐tube solid‐phase microextraction to determine estrogens in water samples

Polypropylene hollow fibers as the adsorbent were directly filled into a polyetheretherketone tube for in‐tube solid‐phase microextraction. The surface properties of hollow fibers were characterized by a scanning electron microscope. Combined with high performance liquid chromatography, the extraction tube showed good extraction performance for five environmental estrogen hormones. To achieve high analytical sensitivity, four important factors containing sampling volume, sampling rate, content of organic solvent in sample, and desorption time were investigated. Under the optimum conditions, an online analysis method was established with wide linear range (0.03–20 µg/L), good correlation coefficients (≥0.9998), low limits of detection (0.01–0.05 µg/L), low limits of quantitation (0.03–0.16 µg/L), and high enrichment factors (1087–2738). Relative standard deviations (n = 3) for intraday (≤3.6%) and interday (≤5.1%) tests proved the stable extraction performance of the material. Durability and chemical stability of the extraction tube were also investigated, relative standard deviations of all analytes were less than 5.8% (n = 3), demonstrating the satisfactory stability. Finally, the method was successfully applied to detect estrogens in real samples.     

Preparation and application of molecularly imprinted polymer solid‐phase microextraction fiber for the selective analysis of auxins in tobacco

As signal molecules, auxins play an important role in mediating plant growth. Due to serious interfering substances in plants, it is difficult to accurately detect auxins with traditional solid‐phase extraction methods. To improve the selectivity of sample pretreatment, a novel molecularly imprinted polymer ‐coated solid‐phase microextraction fiber, which could be coupled directly to high‐performance liquid chromatography, was prepared with indole acetic acid as template molecule for the selective extraction of auxins. The factors influencing the polymer formation, such as polymerization solvent, cross‐linker, and polymerization time, were investigated in detail to enhance the performance of indole acetic acid‐molecularly imprinted polymer coating. The morphological and chemical stability of this molecularly imprinted polymer‐coated fiber was characterized by scanning electron microscopy, infrared spectrometry, and thermal analysis. The extraction capacity of the molecularly imprinted polymer‐coated solid‐phase microextraction fiber was evaluated for the selective extraction of indole acetic acid and indole‐3‐pyruvic acid followed by high‐performance liquid chromatography analysis. The linear range for indole acetic acid and indole‐3‐pyruvic acid was 1–100 µg/L and their detection limit was 0.5 µg/L. The method was applied to the simultaneous determination of two auxins in two kinds of tobacco (Nicotiana tabacum L and Nicotiana rustica L) samples, with recoveries range from 82.1 to 120.6%.     

A rapid,sensitive, and widely applicable method for quantitative analysis of underivatized amino acids in different biological matrices by UHPLC‐MS/MS

A rapid, sensitive, and widely applicable method for the simultaneous quantitative analysis of 20 underivatized amino acids in different biological matrices, including serum, plasma, and tissue homogenates, using ultra high performance liquid chromatography with tandem mass spectrometry was developed and validated. Only 4 µL of serum, plasma, or tissue homogenate was extracted with 996 µL of solution (1.7 mM ammonium formate in 85% acetonitrile containing 0.1% formic acid) containing 100 ng/mL phenylalanine‐d5 as an internal standard without any further derivatization step. In addition, the matrix effects were small because a large volume of extraction solution was used. The total run time including reequilibration was 13 min. The results of linearity, accuracy, repeatability, precision, limits of detection, limits of quantification, and sample stability were sufficient to allow the measurement of the amino acids in different biological matrices. We conclude that our method is rapid, sensitive, and widely applicable and represents an improvement over other currently available technologies.     

Probing the degradation mechanism of forsythiaside A and simultaneous determination of three forsythiasides in Forsythia preparations by a single marker

Forsythiaside A is the major component of Forsythia suspensa. This study investigated the degradation mechanism of forsythiaside A. Eight degraded components including forsythiaside I, forsythiaside H, forsythiaside E, caffeic acid, suspensaside A, β‐hydroxy forsythiaside I, β‐hydroxy forsythiaside H, and β‐hydroxy forsythiaside A were identified by using ultra‐high performance liquid chromatography quadrupole time‐of‐flight mass spectrometry. Then, the quantitative analysis of multi‐components by a single‐marker was performed with ultra‐high performance liquid chromatography to simultaneously determine forsythiaside A, forsythiaside H, and forsythiaside I in Forsythia suspensa preparations. The result showed good linear relationships within 2.871–287.1, 0.231–23.1, and 0.983–98.3 μg/mL (r > 0.9998), with average recoveries of 97.7, 95.7, and 95.8% and relative standard deviations of 1.4, 2.4, and 1.8%, respectively. Using forsythiaside A as an internal reference, the relative retention values of forsythiaside H and forsythiaside I to forsythiaside A were calculated to be 0.89 and 0.61, respectively, and the relative correction factors were 0.816 and 0.799, respectively. The method for quantitative analysis of multi‐components by a single‐marker was applied to evaluate the overall quality of forsythia preparations. There was no significant difference in the measurement results of the method developed and the method of external standard.     

Analysis of sialic acid levels in Chinese intravenous immunoglobulins by high‐performance liquid chromatography with fluorescence detection

Intravenous immunoglobulin (IVIg) is increasingly used for the treatment of autoimmune and systemic inflammatory diseases with both licensed and off‐label indications. Recent studies indicated that IVIg‐mediated immunomodulation and anti‐inflammation are closely associated with the IgG sialylation, especially with IgG crystallizable fragment (Fc) sialylation. The sialic acid levels of the IgG molecules and Fc fragments in 12 IVIg preparations from six Chinese manufacturers were evaluated. The Fc fragments were derived from the papain digestion of IVIg, followed by affinity and size exclusion chromatography. The sialic acid levels in Fc fragments and IVIg preparations were determined by high‐performance liquid chromatography with fluorescence detection, after the sialic acid residues were released from the proteins. The results showed that the sialic acid levels in Chinese IVIg preparations ranged from 0.875 (mol/mol IgG) to 1.085 (mol/mol IgG), and the sialic acid levels in Fc fragments were from 0.321 (mol/mol Fc) to 0.361 (mol/mol Fc). Furthermore, the sialic acid levels of IVIg preparations and Fc fragments from different Chinese manufactures were significantly different. These findings will contribute to an increased understanding of Chinese IVIg preparations and the relationship between the sialic acid levels in IVIg preparations and their clinical efficacy in future clinical studies.     

Study of degradation behavior of besifloxacin,characterization of its degradation products by LC–ESI–QTOF–MS and their in silico toxicity prediction

Knowledge and understanding of the stability profile of a drug is important as it affects its safety and efficacy. In the present work, besifloxacin, a new, fourth‐generation fluoroquinolone antibiotic, was subjected to different forced‐degradation conditions as per International Conference on Harmonization (ICH) guidelines such as hydrolysis (acid, base and neutral), oxidation, thermal and photolysis. The drug degraded under acidic, basic, oxidative and photolytic conditions while it was found to be stable under dry heat and neutral hydrolytic conditions. In total, five degradation products (DPs) were formed under different conditions—DP1 and DP2 (photolysis), DP3 (oxidation), DP4 (acidic), DP3 and DP5 (basic). The chromatographic separation of besifloxacin and its degradation products was achieved on a Sunfire C₁₈ (250 mm × 4.6 mm, 5 μm) column with 0.1% aqueous formic acid–acetonitrile as a mobile phase. The gradient RP‐HPLC method was developed and validated as per ICH guidelines. The degradation products were characterized with the help of LC–ESI–QTOF mass spectrometric studies and the most likely degradation pathway of the drug was proposed. In silico toxicity assessment of the drug and its degradation products was carried out, which indicated that DP3 and DP4 carry a mutagenicity alert.     

Highly alkaline stable anion exchange membranes from nonplanar polybenzimidazole with steric hindrance backbone

The anion exchange membranes (AEMs) with both high ionic conductivity and alkali stability are always the research focus of the AEM fuel cells. Here, a novel nonplanar polymer for AEMs manufacture, mPBI‐TP‐x‐R, with excellent hydroxide stability and satisfactory processability is reported for the first time. The serial mPBI‐TP‐x resins with steric hindrance were prepared by copolymerization among 3,3′,4,4′‐tetraaminobiphenyl, isophthalic acid and tetraphenyl‐terephthalic acid (TP) in different ratios under microwave condensation. The copolymers mPBI‐TP‐x were quaternized at N1/N3‐sites of benzimidazole unit in backbone with alkyl groups (R?CH₃, C₂H₅, n‐C₃H₇, or n‐C₄H₉) to prepare soluble ionomers, and the corresponding membranes in hydroxyl ion form were prepared by a solution casting method and subsequent ion‐exchange process. The chemical structure of all membranes was characterized using FTIR and ¹H NMR spectroscopy. The properties of ion exchange capacity, water uptake, swelling ratio, tensile strength, ionic conductivity, and alkaline stability were measured. Among the prepared membranes, the mPBI‐TP‐15%‐(n‐Bu) exhibited the excellent alkaline stability (only degradation ca. 5% under 1M NaOH aqueous solution at 60 °C for 800 h) and satisfactory OH^? conductivity (46.66 mS/cm at 80 °C). The current research provides a useful exploration to commercial application of alkaline fuel cell. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1087–1096     

Synthesis of oligo(spiroketal)s by polycondensation of silyl ethers derived from naturally occurring myo‐inositol with 1,4‐cyclohexanedione

Oligo(spiroketal)s (OSKs) were synthesized from myo‐inositol, a naturally occurring cyclic compound bearing six hydroxyl groups. The successful synthesis of OSKs was achieved using silyl ethers 2 derived from 1,4‐di‐O‐alkylated myo‐inositol 1 as monomers, which underwent polycondensation with 1,4‐cyclohexanedione (CHD) at 0 °C in the presence of trimethylsilyl triflate as a catalyst. Because of the irreversible nature of the condensation reaction of silyl ethers with ketones, the resulting OSKs 7 had higher molecular weights than previously reported OSKs that were obtained by polycondensation of tetraols 1 with CHD, where backward hydrolysis of the ketal functions occurred. In addition, another series of OSKs, 8, were synthesized using silyl ethers 3 derived from 2,5‐di‐O‐alkylated myo‐inositol 6 , which are more symmetric monomers than silyl ethers 2 . Silyl ethers 3 underwent efficient polycondensation with CHD, whereas tetraol 6 did not, demonstrating that the derivation of such tetraols into the corresponding silyl ethers is a powerful strategy to access OSKs. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2407–2414     

Fluorene‐based Lanthanide Coordination Polymer: Structure,Luminescence and Sensing of Picric Acid

Luminescent coordination polymers can be potential chemosensors and extensive efforts are being devoted to improve their selectivity and sensitivity. In this work, we report a new kind of fluorene‐based Tb‐CP, Tb₄L₆·7DMF·5H₂O ( Tb ₄ L ₆ , H₂L = 4,4′‐(9,9‐dimethyl‐9H‐fluorene‐2,7‐diyl)dibenzoic acid), showing 2D network and strong blue emission. Meanwhile, Tb ₄ L ₆ exhibits excellent selectivity and sensitivity for picric acid (PA). The quenching constant (K_sv) of Tb ₄ L ₆ is equal to 4.5 × 10⁴ L/mol during the concentration range of 0–30 μmol/L, which approaches the best reported CPs‐based on PA sensor up to now. Moreover, we went into depth on the possible mechanisms of luminescence quenching.     

Single‐armed salamo‐like dioxime and its multinuclear Cu (II), Zn (II) and Cd (II) complexes: Syntheses,structural characterizations,Hirshfeld analyses and fluorescence properties

Three multinuclear Cu (II), Zn (II) and Cd (II) complexes, [Cu₂(L)(μ‐OAc)]·CHCl₂ ( 1 ), [Zn₂(L)(μ‐OAc)(H₂O)]·3CHCl₃ ( 2 ) and [{Cd₂(L)(OAc)(CH₃CH₂OH)}₂]·2CH₃CH₂OH ( 3 ) with a single‐armed salamo‐like dioxime ligand H₃L have been synthesized, and characterized by FT‐IR, UV–vis, X‐ray crystallography and Hirshfeld surfaces analyses. The ligand H₃L has a linear structure and C‐H···π interactions between the two molecules. The complex 1 is a dinuclear Cu (II) complex, Cu1 and Cu2 are all five‐coordinate possessing distorted square pyramidal geometries. The complex 2 also forms a dinuclear Zn (II) structure, and Zn1 and Zn2 are all five‐coordinate bearing distorted trigonal bipyramidal geometries. The complex 3 is a symmetrical tetranuclear Cd (II) complex, and Cd1 is a hexa‐coordinate having octahedral configuration and Cd2 is hepta‐coordinate with a pentagonal bipyramidal geometry, and it has π···π interactions inside the molecule. In addition, fluorescence properties of the ligand and its complexes 1 – 3 have also been discussed.