水平管油水分散流液滴粒径及其分布规律研究

油水两相分散流是油水混输管道常见的流型之一,液滴是油水分散流的主要特征,液滴在油水两相管路中受到湍流惯性力、剪切力、界面张力、黏性力等多种力的作用而发生聚结和破裂,从而形成不同的液滴粒径及其分布。本研究采用高速摄像和显微照相两种方法研究了水平管中油水分散流的液滴粒径随混合流量、温度和含油率等参数的变化规律,并利用三种概率分布函数研究了液滴粒径的分布特性。研究结果表明:分散相液滴的Sauter平均直径随混合流量的增加而逐渐减小、随温度升高而逐渐增大、随含油率的增大而增大;液滴粒径的分布规律与Log-Normal和Frechet概率分布函数符合较好。     

三角形网格上多介质流动问题界面处理方法

多介质流动问题的求解一般是在结构网格上实现,而三角形网格对于复杂计算区域具有更好的适应性,本文结合rGFM方法,给出三角形网格上多介质流动问题界面处理方法.利用level-set方法跟踪界面,在界面处构造Riemann问题,得到界面处流体准确的流动状态.通过定义界面边界条件,将多介质流动问题转化为单介质流动问题,利用高精度RKDG方法求解.采用多个算例验证该方法的稳健性和有效性,结果表明该方法能准确捕捉界面和激波的位置,保持界面清晰.     

超燃冲压发动机等截面隔离段中流动的LBM模拟

采用耦合的双分布函数格子Boltzmann方法模拟超燃冲压发动机中隔离段的流动.计算结果反映了隔离段内流场的基本结构,表明LBM在隔离段的模拟中是-种具有潜力的数值计算方法.     

纳米尺度流动速度计算的新方法

采用流体力学中流量与流速的计算和分子动力学相结合的方法,模拟液态氩在纳米通道内的三维Poiseuille流动和驱动方腔流动,计算流体流速.结果表明:平板形纳米通道内,该方法求得的流速与传统分子动力学方法所求流速基本吻合,可以用该方法计算不同壁面情况下的流速;对于纳米方腔通道内的流体,在不同模型下两种方法计算出的流速分布大致相同,但是其边界速度差别很大,在边界的速度计算方面新方法的精确度更高,收敛速度比传统方法快.     

90°弯管内冰浆流动特性数值模拟

基于欧拉法建立了冰浆流动的混合模型,对冰浆在90°弯管内的流动特性进行了数值模拟研究,获得了弯管内冰浆的流场和冰晶颗粒的运动轨迹,探讨了弯管管径、曲率半径及冰浆的流速、浓度参数对弯管内冰浆压降的影响,并对弯管压降的模拟结果与实验结果进行对比,两者吻合较好。结果表明:在计算参数范围内,弯管压降随冰浆流速、浓度及弯管曲率半径的增大而增大,随弯管管径的增大而减小;冰浆在弯管内流动形成二次流现象,两个漩涡区域出现在弯管截面两侧;漩涡导致部分冰晶颗粒的运动轨迹发生改变,并使其向弯管下方的负压区聚集,增大了冰晶颗粒的碰撞几率。     

Particle Size Characterization of an Extra Fine Milled Product

The present research aims to characterize the particle size distribution of sub micron particles suspended in a liquid. The particles milled are an organic poorly water soluble crystalline product. To characterize the size of these particles, different techniques have been tested: imaging techniques (SEM, CryoTEM), static light scattering techniques, dynamic light scattering techniques, centrifugation and flow field flow fractionation. The results indicate that the studied milled particles have a primary particle size close to 180nm and there is strong evidence of larger particles which are very likely aggregates. This is clearly seen from the Cryo TEM results. All the above mentioned techniques should in principle be able to measure samples of dispersion containing particles of ca 180 nm but several are disturbed by the presence of large aggregates. It is difficult to estimate the amount of aggregate present, but most of the time one is interested in what the primary particle size distribution is. It is clear that no single piece of equipment is capable of exactly determining the particle size distribution of our samples, but the static light scattering with low shear on mixing does give a good representation of what is seen with the image analysis by cryo TEM.     

基于代数滑移模型的光催化反应器内催化剂颗粒分布特性研究

针对光催化制氢反应器内液固两相流的特点,运用代数滑移模型,对反应器内的催化剂颗粒-水两相流动进行了数值模拟。采用分块的结构化网格,并运用多重网格方法进行求解。通过与前人实验中压力梯度结果的比较,对模型进行了验证,并最终得到了反应器内催化剂颗粒的典型分布及相应的类型图。     

Unconditionally convergent nonlinear solver for hyperbolic conservation laws with S-shaped flux functions

This paper addresses the convergence properties of implicit numerical solution algorithms for nonlinear hyperbolic transport problems. It is shown that the Newton–Raphson (NR) method converges for any time step size, if the flux function is convex, concave, or linear, which is, in general, the case for CFD problems. In some problems, e.g., multiphase flow in porous media, the nonlinear flux function is S-shaped (not uniformly convex or concave); as a result, a standard NR iteration can diverge for large time steps, even if an implicit discretization scheme is used to solve the nonlinear system of equations. In practice, when such convergence difficulties are encountered, the current time step is cut, previous iterations are discarded, a smaller time step size is tried, and the NR process is repeated. The criteria for time step cutting and selection are usually based on heuristics that limit the allowable change in the solution over a time step and/or NR iteration. Here, we propose a simple modification to the NR iteration scheme for conservation laws with S-shaped flux functions that converges for any time step size. The new scheme allows one to choose the time step size based on accuracy consideration only without worrying about the convergence behavior of the nonlinear solver. The proposed method can be implemented in an existing simulator, e.g., for CO₂ sequestration or reservoir flow modeling, quite easily. The numerical analysis is confirmed with simulation studies using various test cases of nonlinear multiphase transport in porous media. The analysis and numerical experiments demonstrate that the modified scheme allows for the use of arbitrarily large time steps for this class of problems.     

Denoising of quadrature ultrasound Doppler signal from bi-directional flow based on matching pursuit

Denoising of Doppler signal is a preliminary and important step in medical ultrasound imaging. To denoise quadrature Doppler signal from bi-directional flow, we propose a novel method based on matching pursuit in this paper. The proposed method is an iterative decomposition algorithm which decomposes the original Doppler signal into a linear expansion of atoms in a time-frequency dictionary. The time-frequency dictionary is similar to Fourier transform domain and the atoms are similar to orthogonal bases in Fourier transform. In each step of the iteration, the atom which gives the largest inner product with the analyzed signal is selected from the dictionary, and the contribution of this atom is subtracted from the Doppler signal. This process is repeated on the residue until the SNR reaches the maximum. The linear expansion of the selected atoms is the denoised signal. Simulations were conducted on a simulation model with a sampling rate of 12.8 kHz. When the original SNRs are 0 dB, 2 dB, 4 dB, 6 dB, 8 dB, 10 dB, the proposed method can improve the SNR for 7.9 dB, 7.8 dB, 7.5 dB, 7.3 dB, 7.05 dB, 6.8 dB respectively, reduce the root mean square error (RMSE) of the mean frequency waveform to 0.0441 kHz, 0.0303 kHz, 0.0245 kHz, 0.0215 kHz, 0.0161 kHz, 0.0125 kHz respectively, and suppress the RMSE of the spectral width waveform to 0.1774 kHz, 0.0591 kHz, 0.0486 kHz, 0.0170 kHz, 0.0145 kHz, 0.0117 kHz respectively. Preliminary in vivo evaluation was also carried out on a healthy 33-year-old male using B-K medical A/S 3535 ultrasound scanner, and the results showed that the proposed method can effectively enhance the Doppler spectrogram.     

Reply to comment on “On the controversy around Daganzo’s requiem for and Aw-Rascle’s resurrection of second-order traffic flow models” by H.M. Zhang

This contribution compares several different approaches allowing one to derive macroscopic traffic equation directly from microscopic car-following models. While it is shown that some conventional approaches lead to theoretical problems, it is proposed to use an approach reminding of smoothed particle hydrodynamics to avoid gradient expansions. The derivation circumvents approximations and, therefore, demonstrates the large range of validity of macroscopic traffic equations, without the need of averaging over many vehicles. It also gives an expression for the “traffic pressure”, which generalizes previously used formulas. Furthermore, the method avoids theoretical inconsistencies of macroscopic traffic models, which have been criticized in the past by Daganzo and others.