Serum Chloride Optical Sensors Based on Dynamic Quenching of the Fluorescence of Photo-Immobilized Lucigenin

This article describes the preparation and performance of an optical sensor for continuous measurement of chloride at extracellular (serum) levels (20–200mM). The sensor is based on dynamic quenching of the fluorescence of lucigenin which was photo-immobilized on a hydrogel. Quenching occurs via a collisional mechanism, and the decrease in fluorescence intensity on exposure to 100mM chloride typically is –60%. It allows the determination of chloride in the 1 to 200mM concentration range, with a precision of ±3mM at 120mM. Bromide, iodide and salicylate act as interferents, while the effect of pH and oxygen is negligibly small. The sensor displays strong fluorescence intensity, excellent reproducibility, long-term stability, response times in the order of 2–5min, and is used in a commercial serum and blood chloride analyzer.Received January 21, 2003; accepted April 6, 2003 Published online July 28, 2003     

Oscillation condition for a series piezoelectric sensor. Application to the determination of urease activity in plant seeds

The oscillating conditions for a series piezoelectric quartz crystal (SPQC) are proposed and verified experimentally. The influence of the cell constant and oscillator phase on the oscillational ability of the SPQC was investigated. It is shown that the SPQC possesses excellent oscillational ability in low or high conductivity solutions, but in solution of intermediate conductivity, the oscillational ability decreases with increasing oscillator phase or decreasing cell constant, sometimes resulting in a cease-to-oscillate zone. The SPQC was applied to determine the urease activity in plant seeds with a detection limit of 0.004 U ml⁻¹, based on the change in conductivity.     

基于杯芳烃的阳离子荧光分子传感器的研究进展

按照荧光团的种类, 综述了基于杯芳烃的荧光分子传感器对阳离子选择性荧光传感性能的研究进展.     

Spacer effect of appended moieties for molecular recognition in doubly-sodium anthranilate modified γ-cyclodextrin

-Cyclodextrin with two sodium anthranilate moieties (1) has been prepared as a sensor for detecting organic compounds including terpenoids and steroids. Compound1 shows a pure monomer fluorescence whose intensity is increased or decreased upon addition of the guest species examined. In this system, the sodium anthranilate moieties act either as a spacer, which enables the cyclodextrin to form a 1:1 host-guest complex by narrowing the -cyclodextrin cavity, or as a hydrophobic cap.1 recognizes steroids with much higher sensitivity than terpenoids, in which the appended moieties act as a hydrophobic cap for terpenoids and a spacer for steroids, respectively.     

Biomimetic piezoelectric quartz sensor for caffeine based on a molecularly imprinted polymer

A piezoelectric quartz sensor coated with molecularly imprinted polymer (MIP) for caffeine was developed. The MIP was prepared by co-polymerizing methacrylic acid (MAA) and ethylene glycol dimethacrylate (EDMA) in the presence of azobis(isobutyronitrile) as initiator, caffeine as template molecule, and chloroform as solvent. The MIP suspension in polyvinyl chloride/tetrahydrofuran (6:2:1 w/w/v) solution was spin coated onto the surface of the electrode of a 10 MHz AT-cut quartz crystal. The sensor exhibited a linear relationship between the frequency shift and caffeine concentration in the range of 1×10^–7 mg mL^–1 up to 1x10^–3 mg mL^–1 [correlation coefficient (r)=0.9935] in a stopped flow measurement mode. It has a sensitivity of about 24 Hz/ln(concentration, mg mL^–1). A steady-state response was achieved in less than 10 min. The performance characteristic of the sensor shows a promising and inexpensive alternative method of detecting caffeine. Surface studies were carried out for the reagent phase of the sensor using SEM, AFM, and XPS analysis in order to elucidate the imprinting of the caffeine molecule. The SEM micrograph, AFM image, and XPS spectra confirmed the removal of caffeine by Soxhlet extraction in the imprinting process and the rebinding of caffeine to the MIP sensing layer during measurement.     

Utilization of a spiropyran derivative in a polymeric film optode for selective fluorescent sensing of zinc ion

Spiropyrans are the most studied families of func- tional materials due to their reversible structural con- version in response to external optical, chemical, and thermal stimulation[1]. Irradiation with ultraviolet light causes formation of an extended π-conjugation open form (merocyanine form) by heterolytic cleavage of the C (spiro)-O bond, which generates an intense ab- sorption in the visible region. Under the irradiating of visible light, the opened form will come back to the closed spi…     

Use of a Carbon Paste Electrode Modified with Spinel‐Type Manganese Oxide as a Potentiometric Sensor for Lithium Ions in Flow Injection Analysis

A potentiometric sensor constructed from a mixture of 25% (m/m) spinel‐type manganese oxide (lambda‐MnO₂), 50% (m/m) graphite powder and 25% (m/m) mineral oil is used for the determination of lithium ions in a flow injection analysis system. Experimental parameters, such as pH of the carrier solution, flow rate, injection sample volume, and selectivity for Li⁺ against other alkali and alkaline‐earth ions and the response time of this sensor were investigated. The sensor response to lithium ions was linear in the concentration range 8.6×10^?5–1.0×10^?2 mol L^?1 with a slope 78.9±0.3 mV dec^?1 over a wide pH range 7–10 (Tris buffer), without interference of other alkali and alkaline‐earth metals. For a flow rate of 5.0 mL min^?1 and a injection sample volume of 408.6 μL, the relative standard deviation for repeated injections of a 5.0×10^?4 mol L^?1 lithium ions was 0.3%.     

Nafion-PAN optical chemical sensor: optimization by FIA

A copper-sensitive optical chemical sensor (optrode) is described. The optrode is based on a Nafion membrane and an immobilized organic ligand coupled with a flow injection (FI) system. The FI system includes a flow-through removable measuring cell and a simple spectrophotometer. Owing to the miniature size of the system and the efficient use of optical fibers, this optrode is well suited for monitoring environmental water samples. The success of the described optrode system depends on the effectiveness of the FI reagent delivery system. Optimum contact time with the membrane (as determined by the reagent flow rates) and the injected sample volume are critical. Environmental water samples were analyzed for copper content using the optimized optrode system. To validate the optrode's performance, the same water samples were analyzed using the atomic absorption spectrophotometer.     

Chemical sensors (review)

The capabilities and development prospects of chemical sensors as a new area in analytical chemistry and instrument engineering are discussed. Problems of terminology, principles of operation, basic characteristics, and also applications of chemical sensors and sensor analyzers made from them are discussed.From the materials of a report given at a joint scientific session of the departments of the physicochemistry and technology of inorganic materials and of general and technical chemistry.V. I. Vernadskii Institute of Geochemistry and Analytical Chemistry, Russian Academy of Sciences, Moscow 117975. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 3, pp. 487–493, March, 1992.     

Fluorescence ratiometric pH sensor prepared from covalently immobilized porphyrin and benzothioxanthene

A fluorescence ratiometric sensor for pH determination is described in this paper. The sensor incorporated the pH-sensitive dye meso-5,10,15,20-tetra-(4-allyloxyphenyl)porphyrin (TAPP) as an indicator and a pH-insensitive dye N-(2-methacryloxyethyl)benzo[k,l]thioxanthene-3,4-dicarboximide (MBTD), a benzothioxanthene derivative, as a reference for fluorescence ratiometric measurement. To prevent leakage of the dyes, both were photocopolymerized with acrylamide, hydroxyethyl methacrylate, and triethylene glycol dimethacrylate on the silanized glass surface. The reproducibility and response time of the prepared sensor were sufficient. Most common coexisting inorganic ions and organic compounds did not interfere with pH sensing. In the acidic pH range from 1.5 to 5.0 the fluorescence intensity ratio of the two dyes varied linearly as a function of pH. The sensing membrane was found to have a lifetime of at least one month. The sensor was applied to the analysis of waste water and artificial samples.