用于矢量水听器的低频高灵敏度层合梁加速度传感器

压电加速度传感器是同振型矢量水听器的核心部件。为了满足低频高灵敏度矢量水听器的应用需求,提出并研究一种具有层合梁结构的低频高灵敏度加速度传感器。结合弹性力学和压电方程推导层合梁加速度传感器的加速度灵敏度解析解表达式,通过有限元仿真对层合梁加速度传感器尺寸进行优化,给出优化后的尺寸范围。从优化的尺寸范围中选取两种不同尺寸进行加速度传感器振动特性的仿真分析及实物制作(其中压电材料为PZT-5)与性能测试。仿真与测试结果均表明,相比已有的同尺寸金属梁加速度传感器,层合梁加速度传感器可以有效降低谐振频率并提升加速度灵敏度。当压电层厚度为0.5 mm时,加速度灵敏度最大提升3.9 dB,谐振频率下降23%。测试结果与理论分析相符。     

基于自组装膜的光纤错位型氨气传感器

演示了一种基于单壁碳纳米管（SWCNTs）-聚合物自组装复合膜的光纤错位型氨气传感器。通过层层自组装技术在高Q谐振器上涂覆薄膜,薄膜上存在大量的游离羧基以及较大的比表面积,这提供了光与薄膜之间的强相互作用,以及对氨气的高吸附性和选择性。光谱随氨气浓度影响的有效折射率而变化。在(10～37) ×10⁻⁶的低浓度范围内,光谱变化与氨气浓度差之比即灵敏度为13.25 pm/10⁻⁶,检测极限为3.77 ×10⁻⁶并且具有良好的线性。这项工作研制为低浓度和高选择性氨气传感器提供了一种有效的方法。     

高分辨率405 nm激光显微成像系统研究

 研究了405 nm短波长激光作为照明光源、数值孔径0.65显微物镜组成的显微成像系统。采用该系统对CD-R及DVD-R盘片进行了显微成像,并对激光成像散斑进行了消除,同时利用CCD图像传感技术和图像采集技术对显微图像进行实时观察与存储,与卤素灯白光作为照明光源时的显微图像进行了比较。结果表明：该系统在卤素灯白光作为照明光源时对CD-R盘片信息点可清晰分辨,但对DVD-R盘片信息点的图像不可分辨;而在405 nm激光照明时信息点均可清晰分辨,系统分辨优于400 nm,明显高于普通卤素灯白光照明系统。     

Flexible active matrix addressed displays manufactured by printing and coating techniques

A flexible electrochromic active matrix addressed display, including 8 × 8 pixels, is demonstrated by using solution processing based on standard printing and coating manufacturing techniques. Each organic electrochromic display (OECD) pixel and its corresponding organic electrochemical transistor (OECT) are located on different sides of the flexible PET substrate. Electronic vias generated through the plastic substrate connects each OECD pixel with one addressing OECT. When comparing this display with actively addressed OECDs with all its components located on the same side, the present approach based on this electronic via substrate provides an enhanced pixel resolution and a relatively more simplified manufacturing process. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

GasChromatography of Amino Acids as their N-Trifluoroacetyl Methyl Esters and Comparison with the Ion-exchange Method in Maize and Oats

A method for the preparation of N-trifluoroacetyl methyl esters of amino acids has been developed, permitting the separation and determination of 20 amino acids by temperature-programmed gas chromatography on two columns. The method was applied to the analysis of the amino acids in hydrolyzed maize and in hydrolyzed oats, where a direct comparison was made with the ion-exchange method.     

基于红外光谱吸收的煤矿瓦斯光纤传感网络

基于气体在其特征吸收波长下光的吸收随浓度变化的原理,通过对甲烷气体红外吸收光谱的分析,设计了一套检测甲烷气体浓度的多点光纤传感网络。该系统采用分布反馈式半导体激光器(DFB LD)作为光源,高灵敏度、低噪声的InGaAs PIN作为光电探测器,结合空分复用技术复用了16个甲烷气体传感器,采用滤波、前置放大等电路对微弱信号进行处理,经PCI数据采集卡采集各路信号后,再用软件编写程序对采集信号进行快速傅里叶变换等分析。研究表明,该网络各传感器的灵敏度均达到200 ppm(μｇ·mL-1),长时间的精确度和稳定性均可满足实际要求,单个传感器的响应时间小于2 s,系统巡检一周的时间小于32 s。通过理论分析得出,该系统各传感器可放置于离地面20公里以上的矿井中,且该系统可在多场合进行多点的实时检测。     

基于波长扫描的差分吸收光纤煤矿瓦斯传感系统设计

以1 330 nm波段的超辐射发光二极管为光源,利用可调谐光纤法珀滤波器为滤光元件,设计了一套光纤煤矿瓦斯传感系统.该系统采用了参考测量方法和差分吸收技术:一路参考光被引出用以消除光源波动的影响;扫描光纤法珀滤波器获得信号光波长和参考光波长,在实现差分吸收测量的同时,避免了不同滤光元件性能差异和中心波长漂移的影响.实验结果表明,所设计的光纤煤矿瓦斯传感系统的最低可探测甲烷浓度为0.15%.     

光纤复合型油气井下压力温度测量系统

针对目前广泛使用的电子式油气井下压力温度测量系统可靠性低、高温环境漂移大的不足,设计了一种基于非本征型F-P干涉仪(EFPI)和光纤布喇格光栅(FBG)的复合型油气井下压力、温度测量系统,详细说明了其工作原理、传感器组成和信号解调方法,初步试验结果表明,该测量系统不仅克服了电子测量方式的不足,而且具有复用性好、测量精度高等优点.     

Synthesis,binding and fluorescence studies of a new neutral H-bonding receptor for anions based on 3,5-bis(trifluoromethyl)phenylurea

The synthesis and anion binding studies of the new neutral receptor 1,1′-(2,2′-(4,10-dimethyl-1,4,7,10-tetraazacyclododecane-1,7-diyl)bis(2-oxoethane-2,1-diyl))bis(3-(3,5-bis(trifluoromethyl)phenyl)urea) (L1) are reported. L1 is a macrocyclic ligand containing the 3,5-trifluoromethylphenylureido-binding fragment attached as a side arm on the tetraazacyclododecane. L1 is soluble in numerous organic solvents; the binding properties of L1 towards several simple anions (G) were investigated by NMR, UV–vis and fluorescence techniques in DMSO and CH₃CN solutions. L1 is able to bind F^? , Cl^?  and AcO^?  in both solvents; in addition, it binds Br^?  in CH₃CN. Fluoride shows the highest constant values in the halide series (F^?  > Cl^?  > Br^? ) and AcO^?  is the most strongly bound among all the anions investigated. L1 is able to signal the presence of the anions in solution by fluorescence change; in the case of acetate, this occurs in the visible range.