膨胀型类磷酸酯蜜胺盐阻燃剂的合成及应用研究

以双季戊四醇(DPE)、五氧化二磷、水和三聚氰胺为原料,合成了膨胀型环状类磷酸酯蜜胺盐阻燃剂。通过实验提出了合成该阻燃剂的最佳反应条件为：双季戊四醇(DPE)、五氧化二磷、水和三聚氰胺反应物料摩尔配比为1／2．5／2.0／3．45、反应时间4h和反应温度120℃。红外吸收图谱分析表明该阻燃剂具有环状结构,在热重分析和差热分析中该阻燃剂显示出优异的热稳定性和很高的成碳性。以该阻燃剂掺入聚丙烯中,阻燃效果显著,经测试阻燃聚丙烯的极限氧指数(LOI)为33．6,烟密度等级(SDR)为44．25,通过了UL94V-0级。     

Thermal stability and flame resistance of polypyrrole-coated PET fibres

Electro-conducting doped polypyrrole was deposited by in situ oxidative polymerisation on PET non-wovens. Thermal properties were evaluated by means of DSC and TG in nitrogen and air. Flame resistance tests reveal that coated PET fibres resist to direct contact with fire. By thermal analysis, it was found that PPy reduces the temperature at which thermo-oxidative degradation of PET occurs. Polypyrrole-coated PET non-wovens were heated above the melting point of PET for 30 min. After the heating the fibres become brittle and frail, but SEM observations revealed that they maintained their fibrous shape. A loss of chlorine was found because of intense heating.     

Effect of local variations of the laminar flame speed on the global finger-flame acceleration scenario

Numerous formulations describing the dynamics and morphology of corrugated flames, including the scenarios of flame acceleration, are based on a “geometrical consideration”, where the wrinkled-to-planar flame velocities ratio, S_w /S_L , is evaluated as the scaled flame surface area, while the entire combustion chemistry is immersed into the planar flame speed S_L , which is assumed to be constant. However, S_L may experience noticeable spatial/temporal variations in practice, in particular, due to pressure/temperature variations as well as non-uniform distribution of the equivalence ratio and/or that of combustible or inert dust impurities. The present work initiates the systematic study of the impact of the local S_L -variations on the global flame evolution scenario. The variations are assumed to be imposed externally, in a manner being a free functional of the formulation. Specifically, the linear, parabolic and hyperbolic spatial S_L -distributions are incorporated into the formulations of finger flame acceleration in pipes, and they are compared to the case of constant S_L . Both two-dimensional channels and cylindrical tubes are considered. The conditions promoting or moderating flame acceleration are identified, and the revisited equations for the flame shape, velocity and acceleration rate are obtained for various S_L -distributions. The theoretical findings are validated by the computational simulations of the reacting flow equations, with agreement between the theory and modelling demonstrated.     

Effects of combined dimension reduction and tabulation on the simulations of a turbulent premixed flame using a large-eddy simulation/probability density function method

A turbulent lean-premixed propane–air flame stabilised by a triangular cylinder as a flame-holder is simulated to assess the accuracy and computational efficiency of combined dimension reduction and tabulation of chemistry. The computational condition matches the Volvo rig experiments. For the reactive simulation, the Lagrangian Large-Eddy Simulation/Probability Density Function (LES/PDF) formulation is used. A novel two-way coupling approach between LES and PDF is applied to obtain resolved density to reduce its statistical fluctuations. Composition mixing is evaluated by the modified Interaction-by-Exchange with the Mean (IEM) model. A baseline case uses In Situ Adaptive Tabulation (ISAT) to calculate chemical reactions efficiently. Its results demonstrate good agreement with the experimental measurements in turbulence statistics, temperature, and minor species mass fractions. For dimension reduction, 11 and 16 represented species are chosen and a variant of Rate Controlled Constrained Equilibrium (RCCE) is applied in conjunction with ISAT to each case. All the quantities in the comparison are indistinguishable from the baseline results using ISAT only. The combined use of RCCE/ISAT reduces the computational time for chemical reaction by more than 50%. However, for the current turbulent premixed flame, chemical reaction takes only a minor portion of the overall computational cost, in contrast to non-premixed flame simulations using LES/PDF, presumably due to the restricted manifold of purely premixed flame in the composition space. Instead, composition mixing is the major contributor to cost reduction since the mean-drift term, which is computationally expensive, is computed for the reduced representation. Overall, a reduction of more than 15% in the computational cost is obtained.     

Experimental determination of counterflow ignition temperatures and laminar flame speeds of C2–C3 hydrocarbons at atmospheric and elevated pressures

Experimental data were acquired for: (1) the ignition temperatures of nitrogen–diluted ethylene and propylene by counterflowing heated air for various strain rates and system pressures up to 7 atm; (2) the laminar flame speeds of mixtures of air with acetylene, ethylene, ethane, propylene, and propane, deduced from an outwardly propagating spherical flame in a constant-pressure chamber, for extensive ranges of lean-to-rich equivalence ratio and system pressure up to 5 atm. These data, respectively, relevant for low- to intermediate-temperature ignition chemistry and high-temperature flame chemistry, were subsequently compared with calculated results using a literature C₁–C₃ mechanism and an ethylene mechanism. Noticeable differences were observed in the comparison for both mechanisms, and sensitivity analyses were conducted to identify the reactions of importance.     

A novel phosphorus‐containing thermotropic liquid crystalline poly(ester‐imide) with high flame retardancy

A novel phosphorus–nitrogen thermotropic liquid crystalline poly(ester‐imide) (PN‐TLCP) derived from p‐acetoxybenzoic acid (ABA), terephthalic acid (TPA), acetylated 2‐(6‐oxide‐6H‐dibenz<c,e><1,2>oxa phosphorin‐ 6‐yl)‐1,4‐dihydroxy phenylene (DOPO‐AHQ) and N,N'‐hexane‐1,6‐diylbis(trimellitimide) was prepared by melt transesterification. The chemical structure, the mesophase behavior, and the thermal properties of the copolymer were investigated with Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR), elemental analysis, wide‐angle X‐ray diffraction (WAXD), hot‐stage polarized light microscopy (PLM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). PN‐TLCP exhibited a nematic mesophase with a strong birefringence at a low and broad mesomorphic temperature ranging from 220 to 350°C, an initial flow temperature as low as about 190°C and a glass transition temperature of about 160°C. PN‐TLCP has also good thermal stability, high char residues and excellent flame retardancy (limiting oxygen index, LOI = 71 and UL‐94 V‐0 rating). Copyright © 2009 John Wiley & Sons, Ltd.     

东胜长焰煤热解含氧官能团结构演化的13C-NMR和FT-IR分析

以东胜煤田色拉一号井田2号煤层长焰煤为研究对象,利用浮沉离心法富集其镜质组。基于工业分析、元素分析、¹³C-NMR、FT-IR、谱图分峰拟合技术和化学分析测试,求取镜煤及一系列热解煤含氧官能团结构与含量参数,从不同角度研究了含氧官能团的分布规律与演化特点。镜煤中羧基、羰基含量分别为8.91~10.90 mol/kg、1.61~1.79 mol/kg,随热解温度升高羧基显著减少。热解作用促使以端基形式连接在脂肪链或脂肪环结构氧上的甲基和亚甲基首先脱去,且在温度高于350 ℃后基本稳定。氧在热解过程赋存状态的变化是芳香体系与脂肪体系相互竞争的结果,510 ℃热解煤中芳香类氧和脂肪类氧的含量分别为7.49、3.45 mol/kg。羟基的演化过程与热解过程中氧的赋存状态密切相关。随着热解过程的进行,在热解温度低于440 ℃时,各种羟基含量均减少,热解过程对于大分子网络的破坏干扰了各种氢键作用,而羟基π作用则暂时增强,至510 ℃时各种氢键含量均降为最低。东胜长焰煤中含氧官能团化学活性顺序为:[COOH]>[R-O]>[Ar-O-Ar,Ar-O-C,C-O-C]>[C=O]。镜煤非活性醚键含量为0.68 mol/kg,活性醚键为0.48 mol/kg,主要为非活性醚键。     

Microwave-assisted extraction followed by headspace solid-phase microextraction and gas chromatography with mass spectrometry detection (MAE-HSSPME-GC-MS/MS) for determination of polybrominated compounds in aquaculture samples

This paper describes the first validated method for the extraction, purification and determination of trace levels of a number of pollutants of growing concern, including polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs), in aquaculture feeds and products. The new procedure comprises microwave-assisted extraction (MAE; optimized, using a central composite experimental design, to 15 min at 85 °C in 14 mL of 1:1 hexane/dichloromethane), and concentration by headspace solid-phase microextraction (HSSPME), and separation/quantification by gas chromatography with mass spectrometry detection (GC-MS/MS). The method was validated on the reference materials IAEA-406 and WMF-01. Limits of detection for fourteen of the fifteen analytes considered range from 10 to 600 pg g⁻¹, and limits of quantification from 50 pg g⁻¹ to 1.9 ng g⁻¹. Linear ranges, accuracies and precisions are reported.     

A facile fabrication of MOF for selective removal of chromium (III) from aqueous solution

A simple method for fabricating a metal organic framework (MOF: HKUST-1) as sorbent for selective removal of chromium (III) from aqueous solution is discussed. The structure and morphology of HKUST-1 was identified by fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), the powder X-ray diffraction (XRD) and N₂ adsorption-desorption (BET) analysis. Its removal process of chromium (III) and chromium (VI) on HKUST-1 was assessed systematically under various conditions such as pH value, shaking time and initial concentration of chromium (III). At pH 6.0–8.0, HKUST-1 were selective towards chromium (III) but hardly chromium (VI). Kinetic parameters fitted well with pseudo-second-order model and adsorption progress was described by Langmuir isotherm equations and spontaneous and endothermic according to the results of thermodynamics studies (?G?<?0, ?H?>?0, ?S?>?0).     

Effects of flame‐retardant ramie fiber on enhancing performance of the rigid polyurethane foams

Ramie fiber (RF) with excellent tensile strength was treated by a flame retardant and obtained the modified RF (MRF) that is incombustible. Then, MRF was used to improve the performance of rigid polyurethane foams (RPUF). The mechanical properties of the composite were investigated by compressive strength test and shear stress test. The fire characteristics were studied using a cone calorimeter. And the thermal decomposition and flammable properties were further evaluated using thermogravimetric analysis and limiting oxygen index. The results showed that MRF improve the mechanical properties of RPUF and eliminate the harm of flammability of RF on the RPUF.