Simple approach based on ultrasound-assisted emulsification-microextraction for determination of polibrominated flame retardants in water samples by gas chromatography–mass spectrometry

A simple, efficient, innovative and environmentally friendly analytical technique was successfully applied for the first time for the extraction and preconcentration of polybrominated diphenyl ethers (PBDEs) from water samples. The PBDEs selected for this work were those most commonly found in the literature in natural water samples: 2,2′,4,4′-tetraBDE (BDE-47), 2,2′,4,4,5-pentaBDE (BDE-99), 2,2′,4,4,6-pentaBDE (BDE-100) and 2,2,4,4′,5,5′-hexaBDE (BDE-153). The extracted PBDEs were separated and determined by gas chromatography–mass spectrometry (GC–MS). The extraction/preconcentration technique is based on ultrasound-assisted emulsification-microextraction (USAEME) of a water-immiscible solvent in an aqueous medium. Several variables including, solvent type, extraction time, extraction temperature and matrix modifiers were studied and optimized over the relative response the target analytes. Chloroform was used as extraction solvent in the USAEME technique. Under optimum conditions, the target analytes were quantitatively extracted achieving enrichment factors (EF) higher than 319. The detection limits (LODs) of the analytes for the preconcentration of 10 mL sample volume were within the range 1–2 pg mL⁻¹. The relative standard deviations (RSD) for five replicates at 10 pg mL⁻¹ concentration level were <10.3%. The calibration graphs were linear within the concentration range of 5–5000 pg mL⁻¹ for BDE-47 and BDE-100; and 5–10,000 pg mL⁻¹ for BDE-99 and BDE-153, respectively. The coefficients of estimation were ≥0.9985. Validation of the methodology was performed by standard addition method at two concentration levels (10 and 50 pg mL⁻¹). Recovery values were ≥96%, which showed a successful robustness of the analytical methodology for determination of picogram per milliliter of PBDEs in water samples. Significant quantities of PBDEs were not found in the analyzed samples.     

Thermal degradation and flame retardancy of epoxy resins containing intumescent flame retardant

Pentaerythritol diphosphonate melamine-urea-formaldehyde resin salt, a novel cheap macromolecular intumescent flame retardants (IFR), was synthesized, and its structure was a caged bicyclic macromolecule containing phosphorus characterized by IR. Epoxy resins (EP) were modified with IFR to get the flame retardant EP, whose flammability and burning behavior were characterized by UL 94 and limiting oxygen index (LOI). 25 mass% of IFR were doped into EP to get 27.2 of LOI and UL 94 V-0. The thermal properties of epoxy resins containing IFR were investigated with thermogravimetry (TG) and differential thermogravimetry (DTG). Activation energy for the decomposition of samples was obtained using Kissinger equation. The resultant data show that for EP containing IFR, compared with EP, IFR decreased mass loss, thermal stability and R _max, increased the char yield. The activation energy for the decomposition of EP is 230.4 kJ mol⁻¹ while it becomes 193.8 kJ mol⁻¹ for EP containing IFR, decreased by 36.6 kJ mol⁻¹, which shows that IFR can catalyze decomposition and carbonization of EP.     

Comparison of five extraction methods for measuring PCBs,PBDEs, organochlorine pesticides,and lipid content in serum

An increasing number of studies use blood obtained noninvasively to monitor organohalogen contaminants; however, blood can be difficult to analyze because of its aqueous nature and high protein content. We compared five methods for extracting polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), organochlorine pesticides, and lipids from serum using National Institute of Standards and Technology Standard Reference Material 1589a PCBs, Pesticides, PBDEs, and Dioxins/Furans in Human Serum. Liquid:liquid (LLE), cavity-dispersed microwave-assisted (MAE), focused microwave-assisted (FME), solid-phase (SPE), and pressurized fluid (PFE) extraction techniques were compared. FME extraction yielded the optimal recovery of internal standards (IS). All methods resulted in similar contaminant concentrations that also agreed with the certified values for SRM 1589a, except for only a few compounds measured by methods other than FME. Based on these findings, the FME method was determined to be the best overall extraction method. One procedural factor was found to affect contaminant concentrations; use of IS carrier solvents that were immiscible with serum (or when the serum was not directly physically mixed with IS) resulted in a 30% underestimation of organohalogen concentrations. This study offers valid, novel extraction alternatives beyond traditional methods (e.g., LLE) for blood contaminant measurements. Figure       

用N_2O-C_2H_2火焰原子吸收光谱法测定变形钛合金中的铝

采用N2O-C2H2火焰原子吸收光谱法对变形钛合金中的铝进行分析.考察了铝的最佳测定条件、线性浓度范围以及样品分析中的干扰因素.实验表明,该方法测定结果的相对标准偏差小于0. 5%(n=6),加标回收率为97. 6%～99. 0%.该方法适用于变形钛合金中铝的分析,满足实验室化学分析技术与分析质量的控制要求.     

聚磷腈微球的制备及其阻燃PET的研究

采用沉淀聚合法制备聚环三磷腈-co-(3,4-二羟基苯甲酸)(Poly(HCCP-co-PCA))微球,通过傅里叶变换红外光谱、扫描电镜和热重分析等测试手段对其进行表征,研究单体摩尔比对微球的结构、微观形貌以及热稳定性的影响,其中n(HCCP)/n(PCA)为1/0.5时,聚磷腈微球的粒径较为均一,分散均匀,直径为1.5μm左右,并且具有优异的热稳定性和成炭性能。采用熔融共混法制备PET/Poly(HCCP-co-PCA)复合材料,研究Poly(HCCP-co-PCA)的用量对复合材料阻燃性能的影响,并探究其阻燃机理。结果表明,随着Poly(HCCP-co-PCA)含量的增加,复合材料的阻燃性能明显提高。当Poly(HCCP-co-PCA)添加量为1.5(wt)%时,复合材料通过UL 94-V0等级测试,极限氧指数为28.8%,并且热释放速率峰值和总热释放量分别降低了75.26%和69.07%。其阻燃原理主要是燃烧时生成炭层较多,起到较好隔绝效果,同时产生不可燃气体,进一步提升阻燃效果。     

Development of a simple desulfurization procedure for the determination of butyltins in complex sediment samples using gas chromatography-pulsed flame photometric detection

In this study a rapid solid phase extraction (SPE) procedure was developed to minimize the effect of different sulfur species for the determination of butyltin in sediments. The organosulfur species and organotins were firstly retained on C8 cartridges and then organotins were selectively eluted and analyzed by gas chromatography-pulsed flame photometric detection (GC-PFPD). Optimal conditions for the SPE procedure were obtained using an experimental design approach. The method's accuracy was established by analyzing a certified reference material (CRM), BCR-646 freshwater sediment. The experimental values were found to be in agreement with the assigned values for butyltins. Finally, complex sediment samples collected from a Chilean harbor were analyzed using this methodology to demonstrate its analytical potential for the determination of butyltin in environmental samples.     

原子吸收光谱法测定比较5种不同品牌茶叶中微量元素含量

对市售茶叶崂山绿茶、茯茶、安溪铁观音、乌龙茶、茉莉茶王中微量元素Ca、Mg、Fe、Cu、Zn的含量进行考察.采用V(高氯酸)∶V(硝酸)=1∶4混酸消解的方法将样品在低温下消解,火焰原子吸收光谱法定量.实验测得5种茶叶中均含丰富的Ca、Mg,其中茯茶含Fe最多;崂山绿茶含Cu最多;安溪铁观音和崂山绿茶含Zn多.各元素工作曲线相关系数r0.9948,加标回收率94.38%～105.00%,相对标准偏差在2.26%以下.实验方法快速、定量准确,测得各品牌茶叶中微量元素含量可为消费者提供参考.     

A review on flame retardant technology in China. Part I: development of flame retardants

This paper provides an insight into some developments in flame retardants for different polymeric materials in China, primarily based on the publications that have appeared in the last 15 years. It focuses on the following aspects: halogen‐containing flame retardants, inorganic flame retardants (e.g. metal oxides and hydroxides, silicon‐containing materials, ammonium polyphosphate, red phosphorus, and expandable graphite), and organic flame retardants (e.g. aliphatic and aromatic phosphonates, nitrogen‐containing organics, and multi‐element organics). The inherently flame‐retardant polymer systems are also reviewed. The exploration of the novel flame retardants and flame‐retardant systems provides a powerful basis for the construction of flame‐retardant technologies and industrial applications in China. Copyright © 2009 John Wiley & Sons, Ltd.     

Polyamide 6 treated with pentabromobenzyl acrylate and layered silicates

A study of the simultaneous application of a brominated flame retardant and an organically layered silicate (OLS) for the flame retarding of polyamide 6 (PA6) is presented. Upon treating PA6 with at least 7 wt% monomeric pentabromobenzyl acrylate (PMA), a UL‐94 V‐0 rating and an oxygen index (OI) value of 29.7 were obtained. By adding 1 wt% organically layered montorillonite (OMMT) and 10 wt% PMA, the V‐0 rating remained, indicating cooperation between PMA and OMMT. Higher concentrations of OMMT result in a decreased UL‐94 rating showing an antagonism. The size and mass of drops formed in the UL‐94 test increased with increasing OMMT, suggesting an increase in the viscosity and density of the pyrolyzing matrix. The effect of the Br additive on the peak heat release rate (PHRR) measured in the cone calorimeter is similar, but smaller, than that of clay. A calculation of the synergistic effectivity related to PHRR enabling a numerical estimate of the extent of synergism or antagonism is presented. When the ill‐dispersed pristine clay (Na⁺MMT) is used, the viscosity does not increase, the PHRR decreases slightly, but the mass loss rate (MLR) is close to that of the matrix. The time of ignition (TOI) decreases upon the addition of PMA, similarly to the addition of OMMT. This is explained by migration of the Br additive to the surface barrier similar to that of clay so that the low thermal conductivity (TC) barrier is formed before the ignition. Accumulation of heat in the barrier decreases the TOI. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation and flammability of EPDM/PP/Mg(OH)2 dynamic vulcanizates

Magnesium hydroxide (MH) flame retardant dynamic vulcanized ethylene‐propylene‐diene terpolymer (EPDM)/polypropylene (PP) thermoplastic vulcanizates (TPVs) were prepared by a twin‐screw extruder. Influences of MH on their morphology, mechanical properties, flammability, and crystallization behavior have been investigated. Static tensile measurements exhibited that TPVs have higher mechanical properties than un‐vulcanized EPDM/PP/MH blends (UVBs). Scanning electron microscopy (SEM) studies showed that the formation of the larger‐size “micro‐encapsulated structure” where the MH aggregates were covered with a cross‐linked rubber phase improved the interaction between MH and polymer matrix. Results of limiting oxygen index (LOI) and microscale combustion calorimetry (MCC) confirmed that TPVs had superior fire‐resistant properties to UVBs. SEM images showed that more uniform and compact charred layers were generated in TPVs. The differential scanning calorimetry (DSC) results indicated that the crystallization behavior of the flame retardant TPVs changed marginally with increase in MH content. Copyright © 2009 John Wiley & Sons, Ltd.