Novel microwave plasma‐assisted CVD reactor for diamond delta doping

We report on building a novel chemical vapor deposition (CVD) reactor for diamond delta‐doping. The main features of our reactor are: a) the use of rapid gas switching system, (b) the reactor design providing the laminar gas flow. These features provide the creation of ultra‐sharp interfaces between doped and undoped material and minimize the prolonged ”tails” formation in the doping profile. It is proved by optical emission spectroscopy that gas switching time is not more than 10 seconds. Using the novel reactor we have grown the nanometer‐thin layers of boron doped diamond. The FWHM of boron concentration profile is about 2 nm which is proved by SIMS. It is shown that the both single delta‐layer and multiple delta‐layers could be grown using the novel CVD reactor. In principle, the reactor could be used for diamond delta doping with other dopants, like nitrogen, phosphorus etc. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

分子筛膜反应器的研究进展

分子筛膜具有规整的微孔结构(<1 nm), 耐高温高压、 抗有机溶剂, 在液相和气相小分子分离中受到广泛关注. 分子筛膜可以与催化反应耦合于一体构成膜反应器, 使反应过程与组分分离同时进行, 促进反应平衡移动, 达到反应强化的效果. 本文概述了近十年不同类型分子筛膜反应器在催化反应中的应用研究进展, 并对分子筛膜反应器未来的发展趋势进行了展望.     

Role of nickel and manganese in recovery of resistivity in iron-based alloys after low-temperature proton irradiation

This study investigates the recovery of electric resistivity in pure iron, Fe–0.6Ni and Fe–1.5Mn as related to isochronal annealing following 1 MeV proton irradiation at lower temperature than 70 K, focusing on the relationship between solute atoms and irradiation defects. Both nickel and manganese prevent stage I_D recovery, which corresponds to correlated recombination. Stage II recovery is also changed by the addition of a solute, which corresponds to the migration of small interstitial clusters. In both pure iron and Fe–0.6Ni, no evident difference was observed in the stage III region, which corresponds to the migration of vacancies. In contrast, two substages appeared in the Fe–1.5Mn at a higher temperature than stage III_B appeared in pure iron. These substages are considered to represent the release of irradiation-induced defects, which was trapped by manganese.     

Electrochemical Biosensors Based on Enzymatic Reactor of Silver Solid Amalgam Powder for Measurements in Flow Systems

An enzymatic reactor based on silver solid amalgam powder was suggested as the main part of biosensors in flow systems for the first time. Biosensors were tested with following enzymes: ascorbate oxidase, glucose oxidase, catalase, tyrosinase and laccase. The current response of each biosensor was optimized with respect to the detection potential, flow rate, the injection and reactor volume. Relative standard deviation for detection with the studied enzymes was found to be in the range of 0.81–2.1 %. The biosensor with the ascorbate oxidase reactor was used for determination of ascorbic acid in the vitamin tablets Celaskon.     

不同结构Cu_2O多晶的合成及其对高氯酸铵热分解的催化作用

利用均相反应器,在没有添加剂的条件下合成了具有多孔结构的Cu2O微球.考察了合成时间以及反应器旋转速度对Cu2O微球结构的影响.通过增加聚乙烯吡咯烷酮(PVP)的用量,使得Cu2O从多孔微球转变为立方体孪晶,最终形成十四面体孪晶结构.同时,将不同结构的Cu2O多晶应用于催化高氯酸铵(AP)的热分解,结果表明:多孔Cu2O微球较其它结构的Cu2O对AP的热分解具有更高的催化活性,使得AP的低温分解温度降低了37.4°C,而AP在低温阶段的分解量也由8.7%增加至49.0%.     

Heinz Gerrens Revisited: A New Look at the Impact of Reactor Type on Polymer Chain Morphology

The equations for predicting molecular weight distribution, copolymer composition distribution, and copolymer sequence distribution for three polymerization mechanisms (monomer linkage with termination, monomer linkage without termination, and polymer linkage), and three reactor types (batch/plug flow, homogenous continuous stirred tank, and segregated continuous stirred tank) are assembled from various sources and compared and contrasted.     

Numerical investigation on cold flow dynamics of supercritical water fluidized bed reactor with inclined distributor: Design and scale up

Supercritical water fluidized bed reactor (SCWFBR) is a novel concept for the gasification of coal and biomass to produce hydrogen. In this work, to enhance the mixing in the axial direction, an inclined distributor is introduced to optimize the flow dynamics in SCWFBR with partitioned fluid supply. Through numerical simulations based on the two fluid model (TFM), the effects of the inclined distributor structure and operating parameters on the solid distribution and the residence time are evaluated with the optimal values determined. Numerical results show that, area ratio = 2:1, SCW velocity ratio = 3:1, flow ratio = 3.36:1 and inclination angle = 20° are the optimal design in this paper. A predictive correlation of the minimum fluidization velocity for the improved SCWFBR is also proposed based on the numerical data. The average error between the correlation and numerical simulation results is approximately 1.4% which strongly demonstrates its capability. Finally, based on the optimal design, the lab-scale reactor is further scaled up and the studies about two scale-up rules are carried out. Only the cold flow is simulated in this study without considering chemical reaction which would be involved in future work.     

光催化-膜分离集成反应器及其应用

 设计了一种新型光催化-陶瓷膜分离集成反应器,在反冲条件下利用此集成反应器进行了甲基橙光催化氧化反应,分别考察了陶瓷膜对光催化剂TiO2微粉的截留率、膜的渗透通量、光催化氧化脱色率以及不同膜分离压力下的光催化反应速率常数. 结果表明,TiO2-甲基橙悬浆液体系中TiO2微粉的截留率可达到99.9%, 经集成反应器完成一个反应周期后甲基橙氧化脱色率达到10%, 光催化氧化脱色效果高于圆柱式反应器.     

固定化酶反应器及其在蛋白质组研究中的应用

综述了近年来国内外酶固定化载体的研究进展,侧重于无机材料和有机聚合物材料上的固定化酶方法;此外,也介绍了固定化胰蛋白酶反应器与分离系统联用在蛋白质样品分析中的应用,并展望了固定化酶反应器的研究方向及其在蛋白质组中的应用前景。     

生产99Mo、131I和89Sr医用同位素的水溶液堆

99Mo1、31I和89Sr等医用同位素对人类健康和医学的发展具有非常重要的作用。与靶辐照反应堆相比,用水溶液堆生产99Mo1、31I和89Sr具有安全性好,结构简单,经济价值高,无靶件制备、溶解工艺,产生废物少等优点,用水溶液堆生产医用同位素具有很好的发展前景。由于多堆芯水溶液堆、高功率水溶液堆均能显著提高产率,低富集度235U水溶液堆符合核不扩散条约中对235U浓缩度的要求,因此这三种堆是水溶液堆未来的发展方向。