The study of the stability of aqueous three-phase fire-resistant foam in typical liquidus hydrocarbons

The utilization of solid particles in aqueous foam has a great potential in improving fire fighting efficiency. In this study, aqueous foam supported by micro fly-ash (FA) was prepared and its stability in a specific type of oil was characterized. Firstly, different amount of FA was added to study the influence of FA concentration on foamability. It showed that within a specific extent, foam expansion ratio increased with the increasing of FA concentration. And compared with conventional foams, oil resistance of FA stabilized foams, which was investigated by analyzing drainage rate and evolution process with a self-made apparatus, was remarkably improved when FA concentration exceed 4.8wt.%. Secondly, SiO₂ and Al₂O₃ particles with different median sizes were used to study the effect of particle size on stability. However, the smaller hydrophilic particles didn’t behave better as expected. Moreover, the foam stability in three hydrocarbons was evaluated in the same way. The results indicated that the short chain hydrocarbons had much stronger detrimental effect to both two-phase foam and three-phase foam. But overall, the three-phase foam stabilized by FA exhibited much better oil resistance, so it can be used as a promising material for pool fire extinguishing and prevention.GRAPHICAL ABSTRACT     

Chemiluminescent enzyme-linked immunosorbent assay on a strip to detect Escherichia coli O157:H7

A fast and sensitive chemiluminescent enzyme-linked immunosorbent assay method to measure pathogenic bacteria, Escherichia coli O157:H7, on immuno-chromatographic membrane was studied. Non-specific binding of proteins on membrane strip was controlled to attain the best performance of immunosensor by optimising the composition of a running buffer. The specificity of the proposed immunostrip was confirmed by conducting experiments for four different micro-organisms. A chemiluminescent signal could be successfully generated from a proposed immunostrip sensing system, and a significant change in the chemiluminescent light intensity with the concentration of target microbes was obtained. E. coli O157:H7 could be quantitatively measured in the range of 1.1?×?10^3?–1.1?×?10⁷ CFU (colony forming units) mL^?1 within 16?min by using the developed chemiluminescent immunostrip.     

Contamination of therapeutic human immunoglobulin preparations with apolipoprotein H (β2‐glycoprotein I)

Polyclonal immunoglobulin (Ig) concentrates are important biological medicinal products and the assurance of their quality and safety is crucial. In our present approach we used proteomic methods to check the purity of commercial Ig products of different origin. The experimental setup included nonreducing 2DE or DIGE combined with MALDI‐TOF and the thrombin generation assay, a routine safety test for pharmaceutical Ig preparations, and was complemented by a specific immunoassay. 2DE patterns displayed contaminations with trace amounts of human apolipoprotein H (Apo‐H), transferrin, albumin, and its fragments. In contrast to the latter, Apo‐H is a protein that is active in the coagulation cascade, and thus a potential involvement in thromboembolic events in vivo cannot be excluded. It was found by 2DE and MALDI‐TOF to be a contaminant of several Ig preparations. Spiking experiments of Ig preparations with pure Apo‐H demonstrated an Apo‐H concentration dependent increase in thrombin generation assay values. Traces of Apo‐H are possibly also contributing to unwanted side effects, as already known for factor XIa. The significance of Apo‐H contaminations for these side effects might be verified by detailed analyses of pharmacovigilance data.     

A multiplex single nucleotide polymorphism genotyping method using ligase‐based mismatch discrimination and CE‐SSCP

Accuracy, simplicity, and cost‐effectiveness are the most important criteria for a genotyping method for SNPs compatible with clinical use. One method developed for SNP genotyping, ligase‐based discrimination, is considered the simplest for clinical diagnosis. However, multiplex assays using this method are limited by the detection method. Although CE has been introduced as an alternative to error prone microarray‐based detection, the design process and multiplex assay procedure are complicated because of the DNA size‐dependent separation principle. In this study, we developed a simple and accurate multiplex genotyping method using reaction condition‐optimized ligation and high‐resolution CE‐based SSCP. With this high‐resolution CE‐SSCP system, we are able to use similar‐sized probes, thereby eliminating the complex probe design step and simplifying the optimization process. We found that this method could accurately discriminate single‐base mismatches in SNPs of the tp53 gene, used as targets for multiplex detection.     

Editorial Board: Electrophoresis 10'14

Electrophoresis 2014, 35, 1504–1508. DOI: 10.1002/elps.201400001 Combination of DNA biobarcode assay with micro‐capillary electrophoretic analysis on a chip allows us to perform breast and colorectal cancer cell detection with high sensitivity, multiplexity, and accuracy.

     

Portable paper‐based device for quantitative colorimetric assays relying on light reflectance principle

This paper presents a novel paper‐based analytical device based on the colorimetric paper assays through its light reflectance. The device is portable, low cost (<20 dollars), and lightweight (only 176 g) that is available to assess the cost‐effectiveness and appropriateness of the original health care or on‐site detection information. Based on the light reflectance principle, the signal can be obtained directly, stably and user‐friendly in our device. We demonstrated the utility and broad applicability of this technique with measurements of different biological and pollution target samples (BSA, glucose, Fe, and nitrite). Moreover, the real samples of Fe (II) and nitrite in the local tap water were successfully analyzed, and compared with the standard UV absorption method, the quantitative results showed good performance, reproducibility, and reliability. This device could provide quantitative information very conveniently and show great potential to broad fields of resource‐limited analysis, medical diagnostics, and on‐site environmental detection.     

Fluorogenic probes for aldol reactions: tuning of fluorescence using π-conjugation systems

Fluorogenic aldehydes or probes for monitoring of the progress of aldol reactions have been developed. Fluorescence of benzaldehydes conjugated with aryl groups via a double or triple bond and of their aldol products was evaluated in aqueous solutions. Based on the fluorescence, fluorogenic aldol reaction substrates and retro-aldol reaction substrates were identified. Use of the probe system with optimal fluorescence properties for aldol reactions was demonstrated in assays with purified protein catalysts and with overproduced crude protein catalysts in cell lysates.     

基于表面等离子体子共振成像技术研究苏拉明和顺铂对肝癌细胞生长的抑制作用简

基于表面等离子体子共振成像(SPRi)技术提出了一种实时、非标记的新型抗癌药物药效评估方法. 以聚二甲基硅氧烷(PDMS)为材料,制作了包含微柱结构的微流控芯片作为流通反应池,配合自行设计组装的SPRi生物传感器完成肿瘤细胞的特异性捕获及检测,研究了苏拉明和顺铂对肝癌细胞HepG2的生长抑制作用. 同时引入辅助验证实验,即采用常规八肽胆囊收缩素(简称CCK-8)法测定上述药物对肝癌细胞增殖的抑制作用. SPRi检测结果表明,苏拉明和顺铂能抑制肿瘤细胞HepG2增殖并呈现剂量、时间依赖关系.     

基于硼酸酯的19F磁共振分子探针的设计合成及活体深组织活性氧物种的激活响应成像

活性氧簇(ROS), 如过氧化氢, 在生物体内的各种生理和病理过程中发挥着重要作用. 生物体内活性氧簇水平的异常与多种疾病(炎症、 肿瘤和器官损伤等)密切相关, 使ROS监测成为研究和诊断这些疾病的重要工具. 目前, 实现活体内深组织中的活性氧簇成像仍然面临挑战. 本文设计并合成了一种响应型的¹⁹F磁共振成像(MRI)探针(Gd-DPBF), 并将其用于实现对活体内通用活性氧簇的检测和成像. 该探针由钆螯合物通过活性氧簇响应的芳香硼酸酯键与含氟砌块相连接构成. 体外和体内成像实验结果证实, 该探针可以实现在活体荷瘤小鼠中针对肿瘤中高表达的活性氧进行检测和成像, 展示了其在生物体内对活性氧簇相关生理过程进行深组织、 零生物背景成像方面的潜力.     

Analysis of drug interactions with serum proteins and related binding agents by affinity capillary electrophoresis: A review

Biomolecules such as serum proteins can interact with drugs in the body and influence their pharmaceutical effects. Specific and precise methods that analyze these interactions are critical for drug development or monitoring and for diagnostic purposes. Affinity capillary electrophoresis (ACE) is one technique that can be used to examine the binding between drugs and serum proteins, or other agents found in serum or blood. This article will review the basic principles of ACE, along with related affinity-based capillary electrophoresis (CE) methods, and examine recent developments that have occurred in this field as related to the characterization of drug–protein interactions. An overview will be given of the various formats that can be used in ACE and CE for such work, including the relative advantages or weaknesses of each approach. Various applications of ACE and affinity-based CE methods for the analysis of drug interactions with serum proteins and other binding agents will also be presented. Applications of ACE and related techniques that will be discussed include drug interaction studies with serum agents, chiral drug separations employing serum proteins, and the use of CE in hybrid methods to characterize drug binding with serum proteins.