A fluorimetric assay for cortisol

A simple, rapid and sensitive fluorimetric assay for the quantitative determination of cortisol is reported. The assay is based on the formation of a fluorescent dye when cortisol is incubated with a mixture of sulfuric acid and acetic acid. The fluorescence spectrum recorded for the resulting dye shows a maximum extinction at 475 nm and a maximum emission at 525 nm. The solvent 2-methyl-4-pentanone was used for extraction and was found to act as a fluorescence amplifier. A limit of detection of 2.7 μM was achieved, making it possible to forego solvent evaporation. The assay suffers minor interference from 11-deoxycortisol which exhibits low fluorescence at λ _ex: 460 nm; λ _em: 505 nm. Typical standard deviations were below 4%. We validated the assay using a biotransformation with recombinant Schizosaccharomyces pombe which regioselectively hydroxylates 11-deoxycortisol to cortisol. The method described herein is suitable for preliminary screening of microorganisms capable of steroid hydroxylation.     

Micro-Determination of Protein Containing SH– and –S–S– Groups Based on the Polarographic wave of an Electroactive Derivative

This paper presents a new simple and sensitive method for the micro-determination of protein containing SH– and –S–S– groups based on the single sweep polarographic wave of an electroactive derivative. In 0.04molL^–1 Na₃PO₄ and 0.2% ascorbic acid solution, protein is heated in a boiling water bath for 15min, the reaction product giving a sensitive reduction wave at –0.70V (vs. SCE). The wave height is linearly proportional to the concentration of protein. The calibration curves of bovine serum albumin (BSA), human serum albumin (HSA), ovalbumin (OVA) and lysozyme (Lyso) are constructed under the optimal conditions. For BSA and HSA, the linear ranges and detection limits are 0.05–24mgL^–1 and 0.02mgL^–1, respectively. The method has been applied to the determination of protein in human serum samples with satisfactory results. The mechanism of the polarographic wave was also studied, and the results show that S^2– ion is released from the protein molecule during the derivatization reaction, the wave being attributed to the reduction of HgS.     

Miniature biochip system for detection of Escherichia coli O157:H7 based on antibody-immobilized capillary reactors and enzyme-linked immunosorbent assay

In this work, we report Escherichia coli O157:H7 detection using antibody-immobilized capillary reactors, enzyme-linked immunosorbent assay (ELISA), and a biochip system. ELISA selective immunological method to detect pathogenic bacteria. ELISA is also directly adaptable to a miniature biochip system that utilizes conventional sample platforms such as polymer membranes and glass. The antibody-immobilized capillary reactor is a very attractive sample platform for ELISA because of its low cost, compactness, reuse, and ease of regeneration. Moreover, an array of capillary reactors can provide high-throughput ELISA. In this report, we describe the use of an array of antibody-immobilized capillary reactors for multiplex detection of E. coli O157:H7 in our miniature biochip system. Side-entry laser beam irradiation to an array of capillary reactors contributes significantly to miniaturized optical configuration for this biochip system. The detection limits of E. coli O157:H7 using the ELISA and Cy5 label-based immunoassays were determined to be 3 and 230 cells, respectively. This system shows capability to simultaneously monitor multifunctional immunoassay and high sensitive detection of E. coli O157:H7.     

An optical surface plasmon resonance biosensor for determination of tetanus toxin

Surface plasmon resonance (SPR) has been successfully applied for the simple, rapid, and label-free assay of various biomolecules. This assay evaluates a novel wavelength modulation SPR biosensor for the detection of tetanus toxin. The wavelength modulation SPR biosensor is designed based on fixing the incident angle of light and measuring the reflected intensities in the resonance wavelength range spanning 400-800 nm simultaneously. Tetanus toxin (TeNT), one of the most potent toxins known, is synthesized as a 150 kDa single polypeptide chain. The SPR biosensor has been shown to be capable of directly detecting concentration of tetanus toxin as low as 0.028 Lf ml⁻¹. Under selected experimental conditions, the SPR biosensor has a good reproducibility, sensitivity and reversibility. The results illustrate how wavelength modulation SPR biosensor can be used to detect biomolecular interactions.     

Clinical applications of chemiluminescence

This article reviews the clinical applications of chemiluminescence in routine testing and surveys the diverse applications of chemiluminescence in clinical research. In routine clinical testing, chemiluminescent labels (acridinium ester, acridinium sulfonamide) and detection reactions for peroxidase and alkaline phosphatase enzyme labels (luminol and adamantyl 1,2-dioxetane-based reactions, respectively) are widely used in immunoassay and nucleic acid probe assays (e.g. hybridization protection assay, Hybrid Capture^® assay). In clinical research the sensitivity, dynamic range and diversity of chemiluminescent assays has led to a vast range of applications, notably in protein and nucleic acid blotting, microarray-based assays, monitoring reactive oxygen species, and as detection reactions for substances separated by HPLC, capillary electrophoresis (CE), and flow-injection analysis.     

Development of an indirect competitive ELISA for the determination of papaverine

Papaverine (1-(3,4-dimethoxybenzyl)-6,7-dimethoxyisoquinoline, PAP) is a member of the benzylisoquinoline sub-group of the opium alkaloids. It has been widely used for treating diseases like pulmonary arterial embolism and renal or biliary colic. In this paper, a specific conjugate of mono-demethylated papaverine-O-carboxylmethyl ether (MDMPAP-O-CME) and bovine serum albumin (BSA) was synthesized and used as the complete antigen (PAP-BSA), with which we successfully obtained a high-titer anti-PAP polyclonal antibody (pAb) by immunization of rabbits. The anti-PAP pAb showed high affinity to papaverine with an affinity constant (K_aff) of 7.3 × 10⁷ L/mol. With this antibody, we established a sensitive immunochemical method for the determination of papaverine based on indirect competitive enzyme-linked immunosorbent assay (ELISA). The optimal concentrations of the coated antigen (PAP-OVA) and purified pAb used in the ELISA were 5 and 1.2 μg/mL, respectively. The cross reactivity of other benzylisoquinoline derived substances, including 1-(3,4-dihydroxybenzyl)-7-hydroxy-6-methoxy-isoquinoline (6-methoxy-papaveroline, MPAPO), morphine (MP) and codeine (CD) were all lower than 1%. The linear range of the calibration curve was 0.1-1000 ng/mL. Normal human serum samples were spiked with known amount of papaverine and measured by the ELISA. Recoveries were between 102% and 105%. Papaverine content in a commercial papaverine hydrochloride injection sample was also determined using the established ELISA. Compared with the results given by the control experiment of HPLC, the recoveries of ELISA to detect injection samples were 102-110%. The limits of detection for synthetic serum samples and injection samples of papaverine hydrochloride were 0.25 and 0.06 ng/mL, respectively.     

Flammability studies of 3-methyl pyridine/water system

In industrial processes, information on the safety property of chemicals is essentially crucial for safe handling during unit operations. Ensuring the safe use of combustible or flammable substances in processes is unlikely without detailed investigations of their flammability characteristics and related hazards. We studied 3-methyl pyridine (3-picoline), e.g., flammability limits (LFL/UFL), maximum explosion pressure (P _max), maximum explosion pressure rise (dP/dt)_max, minimum oxygen concentration (MOC), vapor deflagration index (K _g), and characterized the influence of inert steam (H₂O) on critical parameters for 3-picoline/water mixtures at 270°C, 1 atm, various oxygen concentrations, and vapor mixing ratios (100/0, 30/70, 10/90 and 5/95 vol.%) with a 20-L-Apparatus in simulated conditions, respectively. The results showed that the flammability characteristics of 3-picoline_(aq) all increased with the oxygen concentration. However, as the composition of inert steam increased, the flammability parameters and the degree of fire and explosion hazards were significantly reduced, instead. This study elucidated the flammability properties of 3-picoline mixed with inert steam. The conclusions could be applied to proactively prevent the relevant processes from incurring fire and explosion accidents.     

化学发光单孵多层免疫技术检测粪样中轮状病毒

以酶联免疫吸附分析（ＥＬＩＳＡ）夹心测定粪样中轮状病毒（ＲＶ）实验为模型，将传统又孵式免疫操作变成单孵式，即在包被ＲＶ抗体Ａｂ的微孔中同时加入含ＲＶ的粪样上清液和根过氧化物酶（ＨＲＰ）标记抗ＲＶ抗原共同孵育，其结果在载体表面形成多层酶免疫复合物，以ＨＲＰ催化鲁米诺－对碘苯酚－过氧化氢化学体系作为最终信号检测系统，从而建立起化学发光单孵多层免疫技术（ＣＬ－ＳＩＭＩＴ）。其灵敏度是ＥＬＩＳＡ的１６倍，     

Thermostability of landscape phage probes

Immunoassays have traditionally relied on antibodies as diagnostic probes. Their use outside of a laboratory, however, may be problematic because antibodies are often unstable in severe environmental conditions. Environmental monitoring requires thermostable probes, such as landscape phage, that carry thousands of foreign peptides on their surfaces, are superior to antibodies, and can operate in non-controlled conditions. While parent wild-type phage are known to be extremely stable in various media at high temperatures, no work has been done to demonstrate the stability of landscape phage probes. We examined the thermostability of a landscape phage probe and a monoclonal antibody specific for -galactosidase in parallel in an enzyme-linked immunosorbent assay (ELISA) format. They were both stable for greater than six months at room temperature, but at higher temperatures the antibody degraded more rapidly than the phage probe. Phage retained detectable binding ability for more than six weeks at 63 °C, and three days at 76 °C. The activation energy of phage degradation was determined to be 1.34×10⁵ J/mol. These results confirm that phage probes are highly thermostable and can function even after exposure to high temperatures during shipping, storage and operation.     

The use of TG-FTIR technique for the assessment of hydrogen bromide emissions in the combustion of BFRs

The TG-FTIR technique was used in the present study to investigate the thermal degradation behaviour of materials containing brominated flame retardants under fire conditions. Time-temperature profiles and oxygen concentrations typical of selected fire scenarios were reproduced in the thermogravimetric analyzer, while the characterization of the gaseous products generated was performed by the simultaneous FTIR analysis. FTIR analysis combined with the use of specific calibration procedures allowed the quantitative estimation of the gaseous products evolved as a function of experimental conditions. The results obtained allowed the straightforward assessment and the comparison of the quantities of hydrogen bromide formed in the oxidation and thermal degradation of pure brominated flame retardants and of flame retarded materials of industrial interest. Hydrogen bromide yields resulted dependent on the experimental conditions used, such as oxygen concentration and heating rate. Although TG-FTIR experiments only provide a representation of the actual heterogeneous combustion products in real fire conditions, the coupled TG-FTIR technique proved to be a straightforward experimental methodology allowing one to obtain reference data on the nature and quantities of the macropollutants generated in a fire. This revised version was published online in July 2006 with corrections to the Cover Date.