一维棒状ZnO的制备及电化学嵌锂性能研究

目前,商业化锂离子电池一般采用石墨作为负极材料,因其电位与金属锂电极的电位很接近,所以当电池反复循环和过充时,石墨表面易析出金属锂,会因形成枝晶而短路。在温度过高时还容易引起热失控。同时,锂离子电池的容量在很大程度上取决于负极的锂嵌入量,而且石墨材料容量相对较低     

New organogermanium cations [RGe(OCH2CH2NME2)2]+ with intramolecular N→Ge coordination bonds

New organohalogermanes RGe(OCH₂CH₂NMe₂)₂X (R = Ph, X = I (5); R = Me, X = Cl (6) or I (7)) with an intramolecular N→Ge coordination bond were synthesized. According to the ¹H and ¹³C NMR spectroscopic data, iodides 5 and 7 exist in solution as ionic compounds with the pentacoordinated germanium atom. In solution of compound 4 (R = Ph, X = Cl), there is an equilibrium between the ionic and covalent forms. The equilibrium shifts toward the ionic form with increasing solvent polarity or temperature. In solution, chloride 6 is a covalent compound. The structures and relative stabilities of different isomers of compounds 4–7 were studied by quantum chemical calculations at the density functional level of theory. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 892–900, May, 2007.     

单分散二氧化钛超微粒子的制备

以四丁氧基钛为原料，采用溶胶－凝胶法制备了超微二氧化钛粉末．改变热处理气氛、升温速率、水与四丁氧基钛的摩尔比以及溶剂，分别得到７ｎｍ球形单相锐钛矿以及四方形（４０ｎｍ×１０ｎｍ）、球形（４４ｎｍ）的主相金红石超微粒子．     

Theoretical studies of molecular conformation. II: Application of the SIBFA procedure to molecules containing carbonyl and carboxylate oxygens and amide nitrogens

The SIBFA procedure (Sum of Interactions Between Fragments computedAb initio, Ref [1]) is extended to the study of the conformational behavior of representative molecules containing amide nitrogens and carbonyl and carboxylate oxygens. The molecules studied are C- and N-ethylammonium formamide, C- and N-ethanol-formamide, ethylammonium formate and ethanolformate. The cases investigated include interactions of the types which occur between functional groups in proteins or ionophores. The accuracy of the procedure, assessed by comparing the results to those of correspondingab initio SCF computations, is very satisfactory. An application of the procedure to study the conformation of the glycyl and alanyl dipeptides as a function of the backbone torsional angles and is presented.     

Atomic Force Microscopy Study of TiO2 Films Obtained by the Sol-Gel Method

Atomic Force Microscopy (AFM) was used to study the influence of thermal treatments on the structural and textural properties of the sol-gel TiO2 films obtained from Ti(OC3H7i)4. X-ray diffraction (XRD), ellipsometric and porosity measurements have also been made.The TiO2 sol-gel films were homogeneous, transparent and amorphous. Heat treatments in the 400–600°C range indicate that the films have a strong tendency to crystallization. The high initial homogeneity of the TiO2 films was preserved during the crystallization process. AFM shows that the thermally treated films exhibit uniform, monodispersed crystals.     

Analysis of high-performance liquid chromatography bonded stationary phases using thermogravimetry

A thermogravimetric method was developed for determining the C-18 bonded phase content of reversed phase high performance liquid Chromatographic stationary phases. The method yielded data that were comparable to the sum of carbon and hydrogen content. Excellent agreement between the two methods was achieved by heating the stationary phase samples to 150°C in order to remove adsorbed species prior to elemental analysis.This research stemmed from the author's Master's degree research undertaken at California State Polytechnic University Pomona, and conducted at the Getty Conservation Institute (GCI).The author is greatly indebted to the following colleagues at the GCI for their advice during the course of this project: Neville Agnew, Charles Selwitz, Dusan Stulik and David Scott. The HPLC bonded stationary phase samples were prepared by John Streng, California State Polytechnic University, Pomona.     

Flux decline behaviors in dead-end microfiltration of activated sludge and its supernatant

The properties of dead-end microfiltration were explored under constant pressure using two types of activated sludge controlled under the condition of different air flow rates. The activated sludge cultured at the air flow rate of 0.15 L min⁻¹ (the anaerobic condition) exhibited a significant flux decline compared with the case of the air flow rate of 2.33 L min⁻¹ (the aerobic condition). It was found from the results of microfiltration of the supernatant separated by centrifugation that the constituents in the supernatant caused a major cake resistance in microfiltration of the activated sludge. The average specific filtration resistance for filtration of the activated sludge was closely consistent with that for filtration of the supernatant at low pressure (49 kPa). However, the cake resistance of the microbial floc in microfiltration of the activated sludge became substantial with increasing filtration pressure because of high compressibility of the microbial floc. Moreover, the foulant and the fouling mechanism in microfiltration of the supernatant were evaluated from both microfiltration test of the supernatant and microfiltration test of the filtrate collected thereby. As a result, the effects of the pore size and material of the microfiltration membrane on the flux decline behaviors in dead-end microfiltration were reasonably elucidated.     

Solution of periodic Poisson's equation and the Hartree–Fock approach for solids with extended electron states: Application to linear augmented plane wave method

We formulate a Hartree–Fock‐LAPW method for electronic band structure calculations. The method is based on the Hartree–Fock–Roothaan approach for solids with extended electron states and closed core shells where the basis functions of itinerant electrons are linear augmented plane waves. All interactions within the restricted Hartree–Fock approach are analyzed and in principle can be taken into account. In particular, we obtained the matrix elements for the exchange interactions of extended states and the crystal electric field effects. To calculate the matrix elements of exchange for extended states, we first introduce an auxiliary potential and then integrate it with an effective charge density corresponding to the electron exchange transition under consideration. The problem of finding the auxiliary potential is solved by using the strategy of the full potential LAPW approach, which is based on the general solution of periodic Poisson's equation. Here, we use an original technique for the general solution of periodic Poisson's equation and multipole expansions of electron densities. We apply the technique to obtain periodic potentials of the face‐centered cubic lattice and discuss its accuracy and convergence in comparison with other methods. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

拟静态法测定混合溶剂的汽化热和汽化熵

讨论了沸点升高法测定混和溶剂化热和汽化熵的原理，并用拟静态法测定了乙醇－丙酮，并－四氯化碳和苯，甲苯三组混和溶剂在不同组成下的正常沸点，根据沸点数据求得了混和泶微分汽化热和汽化熵，实验结果表明，二元混和溶剂与理想溶液偏离不大时，其正常汽化熵符合Ｔｒｏｕｔｏｎ规则。     

Tamarindus indica mucilage and its acrylamide-grafted copolymer as flocculants for removal of dyes

The application of Tamarindus indica seed mucilage (Tam), a food grade polysaccharide, and its acrylamide grafted copolymer as flocculants was assessed for the first time for removal of various types of dyes from model textile wastewater containing azo, basic, and reactive dyes. Acrylamide grafted T. indica mucilage (Tam-g-PAM) was obtained by ceric ion initiated polymerization technique. A series of contact time experiments were conducted to assess the system variables such as concentrations of mucilage and dyes and pH. These flocculants reduce the dye concentration by flocculation and settling. The grafted copolymer, Tam-g-PAM showed better results for dye removal. The optimal flocculant concentration, which was required to effect flocculation, was independent of dye concentration within the range examined. Both the flocculants performed better for removal of azo dyes than for reactive and basic dyes.