Studying effect of MHD on thin films of a micropolar fluid

This paper deals with the study of the effect of MHD on thin films of a micropolar fluid. These thin films are considered for three different geometries, namely: (i) flow down an inclined plane, (ii) flow on a moving belt and (iii) flow down a vertical cylinder. The transformed boundary layer governing equations of a micropolar fluid and the resulting system of coupled non-linear ordinary differential equations are solved numerically by using shooting method. Numerical results were presented for velocity and micro-rotation profiles within the boundary layer for different parameters of the problem including micropolar fluid parameters, magnetic field parameter, etc., which are also discussed numerically and illustrated graphically.     

Orientation dependence of the electrocaloric effect of ferroelectric bilayer thin films

An analytical thermodynamic theory is applied to investigate the electrocaloric effect of ferroelectric BaTiO₃/SrTiO₃ bilayer thin films with different orientations at room temperature. Theoretical analysis indicates that the strong electrostatic coupling between the layers results in the suppression of ferroelectricity at a critical relative thickness which occurs approximately at 50%, 23%, and 12% of SrTiO₃ fraction in the (001), (110), and (111) bilayer thin films, respectively. The ferroelectric bilayer thin films are respected to have the largest electrocaloric effect at this critical relative thickness. Moreover, the electrocaloric effect strongly depends on the orientation and the (110) oriented bilayer thin films have the largest electrocaloric effect. Consequently, control of the orientation and the relative thickness of SrTiO₃ layer can be used to adjust the electrocaloric effect of ferroelectric bilayer thin films, which may provide the potential for practical application in refrigeration devices.     

Synthesis and characterization of nanostructured strontium hexaferrite thin films by the sol–gel method

Nanostructured single phase strontium hexaferrite, SrFe₁₂O₁₉, thin films have been synthesized on the (100) silicon substrate using a spin coating sol–gel process. The thin films with various Fe/Sr molar ratios of 8–12 were calcined at different temperatures from 500 to 900 °C. The composition, microstructure and magnetic properties of the SrFe₁₂O₁₉ thin films were characterized using Fourier transform infrared spectroscopy, differential thermal analysis, thermogravimetry, X-ray diffraction, electron microscopy and vibrating sample magnetometer. The results showed that the optimum molar ratio for Fe/Sr was 10 at which the lowest calcination temperature to obtain the single phase strontium hexaferrite thin film was 800 °C. The magnetic measurements revealed that the sample with Fe/Sr molar ratio of 10, exhibited higher saturation magnetization (267.5 emu/cm³) and coercivity (4290 Oe) in comparison with those synthesized under other Fe/Sr molar ratios.     

Magneto-optical visualization of three spatial components of inhomogeneous stray fields

The article deals with the physical principles of magneto-optical visualization (MO) of three spatial components of inhomogeneous stray fields with the help of FeCo metal indicator films in the longitudinal Kerr effect geometry. The inhomogeneous field is created by permanent magnets. Both p- and s-polarization light is used for obtaining MO images with their subsequent summing, subtracting and digitizing. As a result, the MO images and corresponding intensity coordinate dependences reflecting the distributions of the horizontal and vertical magnetization components in pure form have been obtained. Modeling of both the magnetization distribution in the indicator film and the corresponding MO images shows that corresponding to polar sensitivity the intensity is proportional to the normal field component, which permits normal field component mapping. Corresponding to longitudinal sensitivity, the intensity of the MO images reflects the angular distribution of the planar field component. MO images have singular points in which the planar component is zero and their movement under an externally homogeneous planar field permits obtaining of additional information on the two planar components of the field under study. The intensity distribution character in the vicinity of sources and sinks (singular points) remains the same under different orientations of the light incidence plane. The change of incident plane orientation by π/2 alters the distribution pattern in the vicinity of the saddle points.     

In situ functionalized self-assembled monolayer surfaces for selective chemical vapor deposition of copper

Recent studies show that the self-assembled monolayer (SAM) is well suited to control the selectivity of chemical vapor deposition (CVD). Here, we reported the selective CVD for copper on the functionalized SAM surfaces (with -SH, -SS-, and -SO₃H terminal groups). The -SS- and -SO₃H terminal group surfaces were obtained through in situ chemical transformation of -SH terminal group surface of a 3-mercaptopropyltrimethoxysilane-SAM (MPTMS-SAM). As a result, the -SS- terminal group surface reduces copper deposition and the -SO₃H terminal group surface enhances copper deposition comparing to the -SH terminal group surface. In addition, the MPTMS-SAM was irradiated by UV-light through a photo mask to prepare SH-group and OH-group regions. Then, copper films were deposited only on the SH-group region of the substrate in chemical vapor deposition. Finally, patterns of copper films were formed in the way of UV-light irradiation. These results are expected for use of selective deposition of copper metallization patterns in IC manufacturing processes.     

Nanohole 3D-size tailoring through polystyrene bead combustion during thin film deposition

A novel approach is presented for nanohole 3D-size tailoring. The process starts with a monolayer of polystyrene (PS) beads spun coat on silicon wafer as a template. The holes can be directly prepared through combustion of PS beads by oxygen plasma during metal or oxide thin film deposition. The incoming particles are prevented from adhering on PS beads by H₂O and CO₂ generated from the combustion of the PS beads. The hole depth generally depends on the film thickness. The hole diameter can be tailored by the PS bead size, film deposition rate, and also the combustion speed of the PS beads. In this work, a series of holes with depth of 4-24 nm and diameter of 10-36 nm has been successfully prepared. The hole wall materials can be selected from metals such as Au or Pt and oxides such as SiO₂ or Al₂O₃. These templates could be suitable for the preparation and characterization of novel nanodevices based on single quantum dots or single molecules, and could be extended to the studies of a wide range of coating materials and substrates with controlled hole depth and diameters.     

ZnO/SiO2 复合薄膜的光学性能

采用溶胶-凝胶法在玻璃衬底上制备ZnO/SiO₂复合薄膜,分别用XRD、TEM、SEM对样品的结构和形貌进行表征,并研究了不同ZnO含量对复合薄膜透过率及荧光特性的影响。结果表明,样品经500 ℃退火处理生成了SiO₂和ZnO,其晶粒尺寸为18.7 nm,薄膜具有双层结构。复合薄膜的透过率随着其中ZnO含量的增加而降低,禁带宽度减小,光学吸收边红移。样品在355 nm波长激发下产生了384 nm的紫外发射峰和440 nm的蓝光发射带,并随ZnO含量的增加而增强,它们分别来自ZnO的电子-空穴复合发光和缺陷发光,及ZnO/SiO₂复合薄膜双层结构的缺陷发光。     

Partial electrical potential distribution around nanospheres in metallic nanostructured films

In light of the nanostructured surface model, where half-spherical nanoparticles grow out symmetrically from a plane metallic film, the mathematical model for the partial electrical potential around nanospheres is developed when a uniform external electric field is applied. On the basis of these models, the three-dimensional spatial distribution of the partial electrical potential is obtained and given in the form of a curved surface using a numerical computation method. Our results show that the electrical potential distribution around the nanospheres exhibits an obvious geometrical symmetry. These results could serve as a reference for investigating many abnormal phenomena such as abnormal infrared effects, which are found when CO molecules are adsorbed on the surface of nanostructured transition metals.     

卷绕式螺旋形薄膜介质脉冲形成线设计

采用模块化结构,设计了一种卷绕式螺旋形薄膜介质脉冲形成线,并且对绝缘材料、电极材料的选择依据进行了分析。基于模块化卷绕式脉冲形成线,研制的重复频率脉冲方波产生器采用4个开关同步触发四级形成线模块,从而实现多模块的电压串联叠加,以达到产生高压的目的。开关采用气体火花间隙开关,每级开关及充放电采用电感隔离。研制的脉冲产生器输出电压220 kV,脉冲宽度182 ns,前沿50 ns,可10 Hz重复频率稳定运行。     

Preparation of Nd-doped BiFeO3 films and their electrical properties

The Nd-doped BiFeO₃ thin films were prepared on SnO₂(FTO) substrates spin-coated by the sol–gel method using Nd(NO₃)₃·6H₂O, Fe(NO₃)₃·9H₂O and Bi(NO₃)₃·5H₂O as raw materials. The microstructure and electric properties of the BiFeO₃ thin films were characterized and tested. The results indicate that the diffraction peak of the Nd-doped BiFeO₃ films is shifted towards right as the doping amounts are increased. The structure is transformed from the rhombohedral to pseudotetragonal phase. The crystal grain is changed from an elliptical to irregular polyhedron. Structure transition occurring in the Bi_0.85Nd_0.15FeO₃ films gives rise to the largest Pr of 64 μC/cm². The leakage conductance of the Nd doped thin films is reduced. The dielectric constant and dielectric loss of Bi_0.85Nd_0.15FeO₃ thin film at 10 kHz are 190 and 0.017 respectively.