Dielectric analysis of polystyrene microcapsules using scanning dielectric microscope

 A dielectric imaging technique with a scanning dielectric microscope was applied to polystyrene microcapsules in an aqueous environment to study the electrical properties of individual ones. The dielectric images obtained over a frequency range from 10 kHz to 10 MHz showed frequency dependence, which indicated dielectric dispersion (or relaxation) due to interfacial polarization or the build up of charge on the boundaries between the microcapsule shell and the aqueous phases. The dielectric dispersion was analyzed based on an equivalent electrical circuit model and a shell-sphere model in which a spherical core is covered with an insulating shell. Received: 26 September 1997 Accepted: 26 December 1997     

A dual-electrode approach for highly selective detection of glucose based on diffusion layer theory: experiments and simulation

A dual-electrode configuration for the highly selective detection of glucose in the diffusion layer of the substrate electrode is presented. In this approach, a glassy carbon electrode (GCE, substrate) modified with a conductive layer of glucose oxidase/Nafion/graphite (GNG) was used to create an interference-free region in its diffusion layer by electrochemical depletion of interfering electroactive species. A Pt microelectrode (tip, 5 microm in radius) was located in the diffusion layer of the GNG-modified GCE (GNG-G) with the help of scanning electrochemical microscopy. Consequently, the tip of the electrode could sense glucose selectively by detecting the amount of hydrogen peroxide (H2O2) formed from the oxidization of glucose on the glucose oxidase layer. The influences of parameters, including tip-substrate distance, substrate potential, and electrolyzing time, on the interference-removing efficiency of this dual-electrode approach have been investigated systematically. When the electrolyzing time was 30 s, the tip-substrate distance was 1.8 a (9.0 microm) (where a is the radius of the tip electrode), the potentials of the tip and substrate electrodes were 0.7 V and 0.4 V, respectively, and a mixture of ascorbic acid (0.3 mM), uric acid (0.3 mM), and 4-acetaminophen (0.3 mM) had no influence on the glucose detection. In addition, the current-time responses of the tip electrode at different tip-substrate distances in a solution containing interfering species were numerically simulated. The results from the simulation are in good agreement with the experimental data. This research provides a concept of detection in the diffusion layer of a substrate electrode, as an interference-free region, for developing novel microelectrochemical devices.     

A comparative study on the single-scan and multiple-scan techniques in differential scanning calorimetry: Application to the crystallization of the semiconducting Ge0.13Sb0.23Se0.64 alloy

A method has been developed for analysing the evolution with time of the volume fraction transformed and for calculating the kinetic parameters at non-isothermal reactions in materials involving formation and growth of nuclei. By considering the assumptions of extended volume and random nucleation, a general expression of the fraction transformed as a function of time has been obtained in isothermal crystallization processes. Considering the mutual interference of regions growing from separate nuclei the Johnson–Mehl–Avrami equation has been deduced as a particular case. The application of the transformation rate equation to the non-isothermal processes has been carried out under the restriction of a nucleation which takes place early in the transformation and the nucleation frequency is zero thereafter. Under these conditions, the kinetic parameters have been deduced by using the techniques of data analysis of single-scan and multiple-scan. The theoretical method developed has been applied to the glass-crystal transformation kinetics of the semiconducting Ge_0.13Sb_0.23Se_0.64 alloy. The kinetic parameters obtained according to both techniques differ by only about 2.5%, which confirms the reliability and accuracy of the single-scan technique when calculating the above-mentioned parameters in non-isothermal transformation processes. The phases at which the above-mentioned semiconducting glass crystallizes after the thermal process have been identified by X-ray diffraction. The diffractogram of the transformed material shows that microcrystallites of Sb₂Se₃ and GeSe are associated with the crystallization process, remaining a residual amorphous matrix.     

Determination of oxalate in beer by zone electrophoresis on a chip with conductivity detection

The use of a poly(methylmethacrylate) capillary electrophoresis chip, provided with a high sample load capacity separation system (a 8500 nL separation channel combined with a 500 nL sample injection channel) and a pair of on‐chip conductivity detectors, for zone electrophoresis (ZE) determination of oxalate in beer was studied. Hydrodynamic and electroosmotic flows of the solution in the separation compartment of the chip were suppressed and electrophoresis was a dominant transport process in the separations performed on the chip. A low pH of the carrier electrolyte (3.8), implemented by aspartic acid and bis‐tris propane, provided an adequate selectivity in the separation of oxalate from anionic beer constituents and, at the same time, also a sufficient sensitivity in its conductivity detection. Under our working conditions, this anion could be detected at a 0.5 μmol/L concentration also in samples containing chloride (a major anionic constituent of beer) at a 1800 higher concentration. Such a favorable analyte/matrix concentration ratio made possible accurate and reproducible [typically, 2–5% relative standard deviation (RSD) values of the peak areas of the analyte in dependence on its concentration in the sample] determination of oxalate in 500 nL volumes of 20–50‐fold diluted beer samples. Short analysis times (about 200 s), minimum sample preparation, and reproducible migration times of this analyte (0.5–1.0% RSD values) were characteristic for ZE on the chip.     

Ruthenium‐catalyzed fast living radical polymerization of methyl methacrylate: The R?Cl/Ru(Ind)Cl(PPh3)2/n‐Bu2NH initiating system

A fast living radical polymerization of methyl methacrylate (MMA) proceeded with the (MMA)₂? Cl/Ru(Ind)Cl(PPh₃)₂ initiating system in the presence of n‐Bu₂NH as an additive [where (MMA)₂? Cl is dimethyl 2‐chloro‐2,4,4‐trimethyl glutarate]. The polymerization reached 94% conversion in 5 h to give polymers with controlled number‐average molecular weights (M_n's) in direct proportion to the monomer conversion and narrow molecular weight distributions [MWDs; weight‐average molecular weight/number‐average molecular weight (M_w/M_n) ≤ 1.2]. A poly(methyl methacrylate) with a high molecular weight (M_n ～ 10⁵) and narrow MWD (M_w/M_n ≤ 1.2) was obtained with the system within 10 h. A similarly fast but slightly slower living radical polymerization was possible with n‐Bu₃N, whereas n‐BuNH₂ resulted in a very fast (93% conversion in 2.5 h) and uncontrolled polymerization. These added amines increased the catalytic activity through some interaction such as coordination to the ruthenium center. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 617–623, 2002; DOI 10.1002/pola.10148     

Water sorption and glass transition of freeze-dried camu-camu (myrciaria dubia (H.B.K.) Mc Vaugh) pulp

Differential scanning calorimetry (DSC) was used to determine phase transitions of freeze-dried camu-camu pulp in a wide range of moisture content. Samples were equilibrated at 25°C over saturated salt solutions in order to obtain water activities (a_w) between 0.11–0.90. Samples with a_w>0.90 were obtained by direct water addition. At the low and intermediate moisture content range, Gordon–Taylor model was able to predict the plasticizing effect of water. In samples, with a_w>0.90, the glass transition curve exhibited a discontinuity and T^’_g was practically constant (–58.8°C), representing the glass transition temperature of the maximally concentrated phase(T_g ).     

Differential 3ω calorimeter

We have developed a new dynamic calorimeter using the differential 3ω detection method. The differential 3ω calorimeter is capable of measuring dynamic heat capacity of liquid samples. The new calorimeter consists of a Wheatstone bridge made of two identical heater/sensors, and is based on the sensitive null detection method. The balancing is done automatically at all frequencies and is independent of temperature; once a sample is placed on one heater/sensor, a third harmonic signal is produced due to the difference in the two arms of the bridge. The differential 3ω calorimeter provides enhancements over traditional dynamic methods in dynamic range (up to 30 kHz), resolution, and ease of operation.     

CRYSTALLIZATION AND MELTING OF NYLON 610

Differential scanning calorimetry was used to study the crystallization andmelting of nylon 610. For nylon 610 crystallized from the melt state (260℃), the overall rateof bulk crystallization can be described by a simple Avrami equation with Avrami exponentn ≈ 2, independent of crystallization temperature. With the experimentally obtainedT_m~0 (235℃ ～ 255℃) of nylon 610, the fold surface free energy σ_e was determined to be35 ～38 erg/cm~2. The effects of annealing temperature and time on the melting of quenchednylon 610 were also investigated. For nylon 610 quenched at room temperature there isonly one DSC endotherm peak DSC scans on annealed samples exhibited an endothermpeak at approximately 10℃ above the annealing temperature. The size and position of theendothermic peak is strongly related to annealing temperature and time. An additionalthird melting was observed when quenched nylon 610 was annealed at high temperaturefor a sufficiently long residence time. The existence of the third melting peak suggests thatmore than one kind of distribution of lamella thickness may occur when quenched nylon610 is annealed. The implications of these results in terms of crystal thickening mechanismwere discussed.     

Novel aromatic carboxamides from dehydroabietylamine as potential fungicides: Design,synthesis and antifungal evaluation

The present study was carried out to design and synthesize a number of novel aromatic carboxamide derivatives of dehydroabietylamine. The preliminary antifungal assay indicated that most of title compounds displayed moderate to good antifungal activity toward the six fungal strains in vitro. Compounds 3i, 3q, 4b and 4d showed significant antifungal activity against Sclerotinia sclerotiorum, with EC₅₀ values ranging from 0.067 ～ 0.393 mg/L. Compounds 3i, 4b and 4d also showed pronounced mycelial growth inhibition activities against B. cinerea and A. solani. Furthermore, in the in vivo assay, compound 4b exhibited brilliant protective activity against S. sclerotiorum-infected rape leaves. Meanwhile, the in vivo bioassay on tomato plants infected by B. cinerea showed that compound 3i and 4d displayed excellent protective activity at 200 mg/L, which were near to boscalid. Primary mechanistic study revealed that 4b could inhibit sclerotia formation as well as reduce the exopolysaccharide level. SEM and TEM analysis indicated that 4b possessed a strong ability to destroy the surface morphology of mycelia, cell structure and seriously interfere with the growth of the fungal pathogen. In addition, 4b exhibited good inhibitory activity (IC₅₀ = 23.3 ± 1.6 μM) toward succinate dehydrogenase (SDH). Molecular modeling study confirmed the binding modes between compound 4b and SDH. The above antifungal results and fungicidal mechanism study revealed that this class of dehydroabietylamine derivatives could be potential SDH inhibitors and lead compounds for novel fungicides development.