2H Chemical-shift resolution and dipolar2H-1H,2H-15N correlations in solid-state MAS NMR spectroscopy for structure determination and distance measurements in hydrogen-bonded systems

In solid-state NMR, deuteron (²H) spectroscopy can be performed in full analogy to¹H spectroscopy, including²H chemical-shift resolution and²H-X dipolar correlation schemes, when the NMR experiments are conducted in a “rotor-synchronized” fashion under fast magic-angle spinning. Here, 2H-X NMR experiments of this type, including²H-¹⁵N and²H-¹H chemical-shift correlations and distance measurements, are introduced and demonstrated on cytosine monohydrate, whose acidic protons can readily be replaced by deuterons by recrystallization from D₂O. In this way,²H NMR spectroscopy provides information complementary to¹H NMR data, which is particularly useful for studying hydrogen bonds in supra- or biomolecular systems. Electronic supplementary material Supplementary material is available in the online versionof this article atand is accessible for authorized users.     

Total luminescence intensity (TLI) offers superior early oxidation detection in unstabilised polyethylene but is no better than FT-IR for stabilised polyolefins

In an earlier study, we have shown that chemiluminescence (CL) and the total luminescence intensity (TLI) method are highly sensitive to oxidation in degradable PE. In this study, stabilised PE and PP were characterised with CL in an inert (TLI) and in an oxygen atmosphere (CL-OIT) and the results were compared to those obtained by the commonly used techniques, FT-IR (carbonyl index (CI)) and thermal analysis (DSC-OIT). PE was aged at a low temperature (80 °C) and PP was aged at temperatures between 60 and 120 °C. Non-Arrhenius behaviour was observed in the oxidation of PP. This showed the importance of aging at a low temperature to obtain realistic results. TLI and CI of stabilised PP and most of the stabilised PE gave comparable results with the same sensitivity for oxidation detection. This was in contrast to our previous results for degradable PE. However, TLI of unstabilised PE showed earlier oxidation detection than CI, which agreed with our earlier results. TLI of PE had a higher sensitivity than CL-OIT, and both TLI and CI of PP were sufficiently sensitive to detect the effect of aging at different temperatures, whereas DSC-OIT was not.     

Fast determination of evaporation enthalpies of solvents and binary mixtures using a microsilicon chip device with integrated thin film transducers

A silicon chip device with two types of integrated platinum thin film resistors was applied for microcaloric measurements. It was shown that the device is capable of fast characterization of liquid evaporation behaviour and allows the determination of evaporation enthalpies for pure liquids and mixtures. The applicability was demonstrated for a wide range of solvents from nonpolar aliphatic solvents over polar organics to protic solvents (e.g. iso-octane, toluene, acetone, ethanol, methanol and water). The sample volumes were in the range of about 2-5 μL. The determination of transient times, in case of constant power mode, or the power integral over time was used for the fast estimation of binary liquid mixtures. Thermo-resistive measurements of 5 μL droplets of solvent mixtures like methanol/iso-propanol, ethanol/water, iso-octane/iso-propanol and iso-octane/1,4-dioxane showed significant changes in temperature characteristics and evaporation enthalpies in dependence on composition. The applied heating power was about 1 W, which corresponds to measurement times between a few seconds and a minute.     

Copper passivity and its breakdown in sodium bicarbonate solutions: A scanning electron microscopy and x-ray photoelectron and auger spectroscopy study

Effect of bicarbonate ions on the copper passivity and its local breakdown is studied by cyclic voltammetry, Auger spectroscopy, x-ray photoelectron spectroscopy, and scanning electron microscopy. Comparing data for solutions with various sodium bicarbonate concentrations shows copper to undergo pitting in 0.02 M NaHCO₃, whereas it remains stably passive in 0.10 M NaHCO₃. Independent studies suggest that carbonates play a protective role in stabilization of the oxide-hydroxide passive film on copper.     

Studying dispersoid systems

Summary Measurements of energy transformation in mitochondria are done on a capillary differential titration calorimeter CTD2156. It is important to mention that a sediment is quickly formed by the mitochondria suspension without mixing by means of a vibrating needle. During the measurements, the vibrating needle is located inside the working volume of the chamber. The design of the calorimeter is substantiated theoretically. It provides a new mode of a reagent input in the measuring volume of the calorimetric chambers. It expands the spectrum of tasks that can be solved using this instrument. In the capillary calorimeter the calorimetric chambers unit is simple and small in size. These advantages of capillary chambers provide an opportunity to unite 20 capillary calorimetric chambers in one calorimetric block. It allows designing a multi-channel titration calorimeter. There are obvious advantages of such a calorimeter over other instruments in screening researches and in researches of objects maintaining stability only for a short time.     

Hemocompatibility of poly(acrylonitrile-co-N-vinyl-2-pyrrolidone)s: swelling behavior and water states

Hemocompatibility is an essential aspect of blood contacting polymers. Knowledge of the relationship between polymer structure and hemocompatibility is important in designing such polymers. In this work, the effect of swelling behavior and states of water on the hemocompatibility of poly(acrylonitrile-co-N-vinyl-2-pyrrolidone) (PANCNVP) films was studied. Platelet adhesion and plasma recalcification time tests were used to evaluate the hemocompatibility of the films. Considering the importance of surface properties on the hemocompatibility of polymers, static water contact angles were measured by both sessile drop and captive bubble methods. It was found that, on the film surface of PANCNVP with a higher NVP content, adhered platelets were remarkably suppressed and the recalcification time was longer. The total water content adsorbed on the PANCNVP film was determined through swelling experiments performed at temperatures of interest. Differential scanning calorimetry and thermogravimetric analysis were used to probe the states of water in the films. Based on the results from these experiments, it was hypothesized that the better hemocompatibility of PANCNVP films with higher NVP contents was due to their higher free water content, because water molecule exchange at the polymer/liquid interface, facilitated by a high free water content, is unfavorable for the formation of surface bound water, which causes poor hemocompatibility. [diagram in text].     

Application of jäntti's method to volumetric adsorption measurements

Jäntti introduced a method to calculate the adsorption equilibrium by measuring the actual adsorbed amount three times after a change to the gas pressure. By this method the experimental time for adsorption measurement can be considerably shortened. The procedure was developed for use in adsorption measurements where the adsorbed masses are directly measured with a balance. In the present paper we will demonstrate that the method is particularly useful in volumetric (manometric) measurements.     

冻干保护剂溶液低温退火特性的研究

利用差示扫描量热仪(DSC)研究了10%叔丁醇/10%蔗糖/水溶液的冻结特性, 退火温度及退火时间, 分析了溶液的退火行为. 实验结果表明, 溶液降温时, 蔗糖的存在阻碍了叔丁醇析出, 最大冻结浓缩溶液玻璃化转变温度Tg′由－32.5 ℃降低到－42.0 ℃, 升温时在－30 ℃叔丁醇发生反玻璃化. 在反玻璃化峰附近的温度进行退火可使叔丁醇充分析出, Tg′由－42.0 ℃上升到－34.9 ℃. 所需的退火时间与退火温度有关, 退火温度越接近Tg′, 所需的退火时间越长. 在－37 ℃时, 退火20 min可完全消除反玻璃化.     

Interaction of sodium cholate with dioctadecyldimethylammonium chloride vesicles in aqueous dispersion

Mixtures of dioctadecyldimethylammonium chloride (DODAC) cationic vesicle dispersions with aqueous micelle solutions of the anionic sodium cholate (NaC) were investigated by differential scanning calorimetry, DSC, turbidity and light scattering. Within the concentration range investigated (constant 1.0 mM DODAC and varying NaC concentration up to 4 mM), vesicle → micelle → aggregate transitions were observed. The turbidity of DODAC/NaC/water depends on time and NaC/DODAB molar concentration ratio R. At equilibrium, turbidity initially decreases smoothly with R to a low value (owing to the vesicle–micelle transition) when R = 0.5–0.8 and then increases steeply to a high value (owing to the micelle–aggregate transition) when R = 0.9–1.0. DSC thermograms exhibit a single and sharp endothermic peak at T_m ≈ 49 °C, characteristic of the melting temperature of neat DODAC vesicles in water. Upon addition of NaC, T_m initially decreases to vanish around R = 0.5, and the main transition peak broadens as R increases. For R > 1.0 two new (endo- and exothermic) peaks appear at lower temperatures indicating the formation of large aggregates since the dispersion is turbid. All samples are non-birefringent. Dynamic light scattering (DLS) data indicate that both DODAC and DODAC/NaC dispersions are highly polydisperse, and that the mean size of the aggregates tends to decrease as R increases.     

利用AFM和SNOM对淋巴细胞膜表面超微结构及其光学性质的初步研究

利用原子力显微镜(Atomic Force Microscopy，AFM)对淋巴细胞表面形貌进行了形态学的初步研究，观察到了其膜表面其他显微技术所不能发现的超微结构．同时也运用扫描近场光学显微镜(Scanning Near field Optical Microscopy，SNOM)对淋巴细胞进行成像，观察了其对光的透射、吸收等光学性质，并对两种成像方法进行了比较．研究发现：淋巴细胞膜表面凹凸不平，分布着大量直径几十到几百纳米不等的小颗粒；淋巴细胞中央部位有自发荧光现象．结果表明，AFM和SNOM可作为进一步探讨淋巴细胞的结构与功能关系的有力工具．