Bifunctional pyridyl alcohols with the bicyclo[3.3.0]octane scaffold in the asymmetric addition of diethylzinc to aldehydes

Some new pyridyl alcohols with the cis-bicyclo[3.3.0]octane scaffold were synthesized and used as chiral ligands for the enantioselective addition of diethylzinc to aldehydes. Ligands 4 were found to be far superior to the C₂-symmetric ligands 2 in terms of enantioselectivities. Quantitative yields and enantiomeric excesses of up to 92% were obtained when the ligand 4 was used. The carbonyl function in 4 proved to be beneficial for the high enantioselectivities in the addition of diethylzinc to aldehydes. Conversion of the carbonyl group into oxime or oxime ether group led to a sort of more active ligands, which catalyzed the same reaction with rate acceleration.     

Detection of soil pollution by hydrocarbons using headspace-mass spectrometry and identification of compounds by headspace-fast gas chromatography-mass spectrometry

The direct coupling of a headspace sampler with a mass spectrometer is proposed as a screening tool for the rapid detection of soil pollution by hydrocarbons from petroleum and derivatives. The samples are subjected to the headspace generation process, with no prior treatment, and the volatiles generated are introduced directly into the mass spectrometer, thereby obtaining a fingerprint of the sample analysed. Suitable treatment of the signal by chemometric techniques allows unequivocal characterisation of the different types of sample. The use of fast gas chromatography with a mass spectrometer detector coupled to the headspace sampler allows identification of the major hydrocarbons present in the mineral and organic polluted samples, interpretation of the results obtained, and demonstrates the analytical potential of headspace-mass spectrometry coupling.     

Synthesis, crystal structure of bis(arylamido)lanthanide methyl complexes and their catalytic behavior for the polymerization of methyl methacrylate

Reactions of [N(C₆H₃i-Pr₂-2,6)(SiMe₃)]₂LnCl(THF) (Ln=Nd, Yb) with two equivalents of MeLi in a mixture solution of toluene and Et₂O gave [N(C₆H₃i-Pr₂-2,6)(SiMe₃)]₂LnCH₃(μ-CH₃)Li(THF)₃·PhCH₃ (Ln=Nd (1), Yb (2)) in good isolated yields as crystalline solids. The single-crystal structural analysis of 2 revealed that the coordination geometry of ytterbium ion is best described as a distorted pseudo-tetrahedron. Both 1 and 2 are active for the polymerization of methyl methacrylate to give syndiotactic-rich and high molecular weight polymers (M_n>10⁴) with relatively narrow molecular weight distributions (M_w/M_n<2).     

一维链状配位聚合物{[Cu(μ-H_2L)(L)Cl](ClO_4)_3}_∞的合成、结构及磁性研究(L=N,N'-双(吡啶基-3-亚甲基)-1,5-二氮环辛烷)

设计合成了一个新型吡啶基二氮环配体L(N,N'-双(吡啶基-3-亚甲基)-1,5-二氮环辛烷)及其铜配位聚合物{[Cu(滋-H2L)(L)Cl](ClO4)3}∞(1),研究了此配合物的晶体结构、光谱及磁性质。该配合物属正交晶系,Pnma空间群,晶胞参数为a=3.5170(17)nm,b=1.0440(5)nm,c=1.1966(6)nm,V=4.394(4)nm3,Z=4。配体L以顺式螯合和反式桥联两种不同的配位形式将铜离子连接起来形成一维链状阳离子结构。     

Surface properties of Reactive Yellow 2 immobilised pHEMA and HEMA/chitosan membranes: characterisation of their selectivity to different proteins

Poly(hydroxyethyl methacrylate), pHEMA, and a composite pHEMA/chitosan networks were synthesized in the membrane form via UV initiated photo-polymerisation in the presence of an initiator ,′-azoisobutyronitrile. Reactive Yellow 2 (RY-2) was covalently immobilised as a dye–ligand onto both membranes. The polarity and surface energy of the investigated membranes were determined by contact angle measurement. The incorporation of chitosan in the pHEMA networks produced more hydrophilic surface, as indicated by contact angle analysis. The binding characteristics of lysozyme, γ-globulins, human serum albumin (HSA) and bovine serum albumin (BSA) to pHEMA-RY-2 and pHEMA/chitosan-RY-2 affinity membranes have been investigated from aqueous solution and their dye–ligand free forms were used as control systems. When chitosan was incorporated in the pHEMA network as a cationic polymer led to higher adsorption capacity for the lysozyme. Selective adsorption behaviour was also observed in the case of pHEMA/chitosan-RY-2 membrane for the lysozyme. The non-specific adsorptions of the lysozyme on the pHEMA and pHEMA/chitosan membranes were about 1.9 and 7.2 mg/ml, respectively. These were negligible for all others investigated proteins. The lysozyme adsorption data was analysed using the first-order and the second-order models. The first-order equation in both affinity membrane systems is the most appropriate equation to predict the adsorption capacities of the adsorbents. The adsorption isotherms well fitted the combined Langmuir–Freundlich model. A theoretical analysis has been conducted to estimate the thermodynamic contributions (changes in enthalpy, entropy and Gibbs free energy) for the adsorption of lysozyme to both dye–ligand immobilised membranes. The adsorption capacities of both dye–ligand immobilised membranes increased with increasing the temperature while decreased with increasing the NaCl concentration. Both affinity membranes are stable when subjected to sanitization with sodium hydroxide after repeated separation–elution cycles.     

Effect of Organic Ligands Used in Sol-Gel Process on the Formation of Mullite

The preparation of mullite by the sol-gel method using organic polydentate ligands and the effect of the raw materials and organic polydentate ligands on the formation of mullite were investigated. Two series of samples were prepared using tetraethoxyorthosilicate (TEOS) and aluminum nitrate nonahydrate, or dibutoxyethylacetoacetatoaluminum (Al(OBu)₂(AcAcEt)) as the silica and alumina sources, respectively, and using ethylene glycol (EG), 1,3-propanediol (PD), 1,3-butanediol (BD), 2-methyl-2, 4-pentanediol (MPD), diethlene glycol monoethyl ether (DEME) and ethoxyethanol as the ligands. When the alumina source was aluminum nitrate nonahydrate, mullite was apt to appear in the order of EG>PD>MPD. When Al(OBu)₂(AcAcEt) was the alumina source, the tendency toward the appearance of mullite crystalline phase was EG>BD>DEME>MPD. Between the two alumina sources, aluminum nitrate nonahydrate gave mullite much easier than Al(OBu)₂(AcAcEt). These relationships were discussed from the viewpoints of the coordination ability of the ligands and the miscibility between the silica and alumina.     

The rhodium complex of a tris(bipyridine) ligand—Its electrochemical behaviour and function as mediator for the regeneration of NADH from NAD+

The tris-bipyridine ligand3a and its stoichiometric Rh³⁺ complex have been prepared. Cyclovoltammograms of the complex at pH 7.4 using a glassy carbon disk electrode reveal a strong reduction peak at –620 mV and two weak reduction peaks at more negative voltage. The reduction potential of the new complex is shifted by 300 mV to more positive values as compared to [Rh(bipy)₃]³⁺. There is no reversible reoxidation peak of the Rh(I) complex formed due to the decomplexation of one of the three bipyridine units in the course of the transition Rh(III)Rh(I). The Rh(III) complex of3a was also studied with respect to its function as a possible redox mediator for the electrochemical regeneration of NADH from NAD⁺. The preparative electrolysis of the Rh³⁺ complex of3a in the presence of NAD⁺ yields a selective formation of NADH, whereas NAD dimers were not detected. On the other hand, a significant acceleration of this reaction compared to [Rh(bipy)₃]³⁺ was not observed.     

Transition-Metal Complexes with Nano-Sized Phosphine and Pyridine Ligands-Catalysis,Fluxional Behavior and Molecular Recognition

Nano-sized phosphine and pyridine ligands having tetraphenylphenyl-, m-terphenyl-, poly(benzylether) moieties were synthesized. These ligands showed a remarkable effect on homogeneous transition metal catalyzed reactions. Pd(II) complexes with tetraphenylphenyl substituted pyridine ligands show high catalytic activities for oxidation of ketones suppressing Pd black formation and maintains the catalytic activity for a long time. Rh(I) complex catalysts with m-terphenyl substituted phosphine ligands showed remarkable rate acceleration in the hydrosilylation of ketones. In addition, several phosphinocalixarene ligands were synthesized and their coordination studies with Pd(II), Pt(II), Ru(II), Ir(I), and Rh(I) metals were documented. Ir(I) and Rh(I) cationic complexes with a 1,3,5-triphosphinocalix[6]arene ligand showed dynamic behavior with size-selective molecular recognition.     

Design and self-assembly of ditopic and tetratopic cavitand complexes

The self-assembly of open ditopic and tetratopic cavitand complexes has been investigated by using monofunctionalized cavitand ligands and suitable metal precursors. In the case of ditopic complexes, self-assembly protocols, leading exclusively to the formation of both thermodynamically stable cis-Pt square-planar complexes 8 and 9 and the kinetically inert fac-Re octahedral complex 14, have been elaborated. The use of cis-[Pt(CH3)CN)2Cl2] as metal precursor led to the formation of monotopic trans-10 and ditopic trans-11 cavitand complexes, while cis-[Pt(dmso)2Cl2] afforded both cis-13 and trans-11 isomers. The self-assembly of tetratopic cavitand complexes has been achieved by using mononuclear [Pd(CH3CN)4(BF4)2] and dinuclear [M2(tppb)(OTf)4] (19: M = Pt; 20: M = Pd) metal precursors. Only the tetratopic dinuclear complexes 21 and 22 were stable. The ligand configuration with two phosphorus and two cavitand ligands at the metal centers is the most appropriate to build tetratopic cavitand complexes with sufficient kinetic stability.