Interaction of water with the regenerated cellulose membrane studied by DSC

One to three endothermal peaks atributted to melting of bulk and interfacial water were observed by DSC in the regenerated cellulose — water system. The profiles of thermal effects depend on water content, time of conditioning, film pretreatment and the conditions applied during the preceding freezing-thawing cycles. The occurrence might be deduced of melting-crystallisation processes. A large amount of non-freezable strongly bounded water was also detected. Although cellulose absorbs water quickly after immersion, the structural changes consisting on ordering of polymer fraction occur during further conditioning due to increase in strength of water binding. Using the membranes in the separation module at 90°C causes weakening of these bonds. Differences between interaction of particular cellulose films with water can be detected during the first, the second and the third heating. This revised version was published online in July 2006 with corrections to the Cover Date.     

THE COMPARISON OF LANZHOU LOESS PROFILE WITH VOSTOK ICE CORE IN ANTARCTICA OVER THE LAST GLACIATION CYCLE

Loess near Lanzhou in the late Pleistocene is very sensitive to climatic fluctuations. The Beiyuan terrace profile in Linxia City, of which the curve of susceptibility tallies with the trend of isotopic curves of Vostok 2083 m ice core in Antarctica, is 35m thick. There are five layers of paleosols under Malan loess(L_1). Upper three layers (S_(1-a),S(1-b)and S_(1-c) correspond to three warm stages in last interglaciation, Interstadial of Last Glacial (C stage in Antarctic ice core)was clearly recorded in the Beiyuan profile, in which three layers of paleosols and two of loess were formed. The lowest section of the profile belongs to penultimate glaciation, in which fossils of cold-drought-resistant mammal and mollusc have been discovered.     

Adsorption of fast green and erythrosin-B to montmorillonite modified with crystal violet

Adsorption of erythrosin-B (EB) and fast green (FG) to a non-charged organosmectite based on crystal violet adsorbed up to 100% of the cation exchange capacity (CEC) was tested. Adsorption isotherms of EB and FG were prepared at 3, 24 and 50°C. All isotherms are of H-type reaching loads of approximately up to 20% of the original CEC of the crude montmorillonite (up to 0.15 and 0.10 mol dye kg^–1 clay for EB and FG, respectively). Adsorption decreases with temperature, indicating an exothermic process. Enthalpy was evaluated using van’t Hoff equation, yielding approximately –20 kJ mol^–1 for both dyes.     

A statistical model for the optimization of dsc performance in the evaluation of drugs for preformulation studies

Differential scanning calorimetry (DSC) is a thermal analytical tool for preformulation studies. Extrapolated melting temperature (T_P) and heat of fusion (ΔH_f) can be used as parameters for optimizing the DSC performance. Two model pharmaceuticals acetaminophen and nicotinamide are used in this study. Using a factorial design for the experimental model and matrix analysis the results, the effect of sample mass, heating rate and the nitrogen flow rate were evaluated on the ΔH_f values and T_P values. Two levels for each of the procedural variables were used as a balanced experimental design with two sample sizes, two heating rates and two nitrogen flow rates. It was found that the change in the heating rate caused significant changes in the ΔH_f values but not the T_p values for acetaminophen. However, no significant effect was found for the T_p value but ΔH_f value was affected to a certain extent for nicotinamide.     

Influence of Pore-expansion Agent on the Structure and Performance of Activated Alumina Synthesized from Waste Aluminum Sludge

1 INTRODUCTION The reactivity of activated alumina adsorbent is closely related to its specific surface area: the larger the specific surface area, the better its activity and adsorbent capability are. However, in reality, the prac- tically available specific surface area or effective spe- cific area has relationship with its pore structure[1]. Since many reactant molecules are difficult to enter the pores to react with whose radius is shorter than certain critical value, the increase of p…     

Effect of the polyethylene confinement and topology on its crystallisation within semicrystalline ABC triblock copolymers

The isothermal crystallisation behaviour of the polyethylene block within polystyrene-b-polyethylene-b-poly(ε-caprolactone), SEC, triblock copolymers was studied by differential scanning calorimetry. The morphology was observed by transmission electron microscopy. Melting scans after isothermal crystallisation performed at different times were employed to determine the crystallisation kinetics one step at a time (“isothermal step crystallisation”). Double melting endotherms were observed after isothermal crystallisation and they were interpreted as a result of the melting of two lamellar populations. These arise from the intrinsic short chain branching distribution within the hydrogenated polybutadiene chains that conform the PE blocks and from their location within the copolymer microdomains. The Hoffman-Weeks procedure failed to yield reasonable values for the equilibrium melting point of the PE blocks as a result of the distribution of linear sequences present in these blocks. The results indicate that as the degree of PE confinement increases the Avrami index decreases to values that are even lower than 1, a result that can be explained by the nature of the homogeneous nucleation process that is in between sporadic and instantaneous.     

Nucleation and growth of copper on glassy carbon: Studies in extended overpotential interval

The nucleation and growth of copper crystals on a glassy carbon electrode are investigated at different constant overpotentials. Current transients are recorded and the number of copper nuclei is microscopically registered. The experimental data for the growth current are interpreted according to the theories of progressive and instantaneous nucleation and information is obtained on the stationary nucleation rate, the saturation nucleus number density and the exchange current density at the crystals–solution interface boundary.     

金属Cu低指数表面熔化行为的分子动力学模

采用Mishin镶嵌原子势, 通过分子动力学方法模拟了金属Cu的低指数表面在不同温度的表面熔化行为, 分析了熔化过程中系统结构组态的变化以及固-液界面迁移情况. 金属Cu的(100)和(110)表面在低于熔点发生预熔化, 而(111)表面存在明显的过热现象. 准液体层的厚度随温度升高而增加, 热稳定性与表面的密排顺序一致, 按(111)、(100)、(110)顺序增大. 当温度高于热力学熔点时, 固液界面的移动速度与温度成正比, 外推得到热力学熔点约为1360～1380 K, 与实验结果1358 K吻合良好. 动力学系数定义为界面移动速度与过热程度的比值, 表现为明显的各向异性: k100=39 cm•s−1•K−1, k110=29 cm•s−1•K−1, k111=20 cm•s−1•K−1. k100与k110之间的比例符合collision-limited理论, (111)密排面有与其它低指数表面不同的熔化方式.     

STUDIES ON PREPARATION OF INACTIVATED VACCINES FROM CELL CULTURES OF MINK ENTERITIS VIRUS (MEV) AND THEIR IMMUNITY

In this paper, superhigh reproductive rate strains of MEV with titre more than HA8192* or TCID50 log9.7 10 have been achieved both by cultivation in cell lines with different susceptibility to MEV and by isolating and identifying in field by the author. The systematic tests proved that S18 and L12 strains of MEV are the best strains for vaccine preparation. In this study, the best means for the tissue cultivation of MEV and the most advanced technological process for the production and detection of serum-free cell-cultured MEV fluids with super-high HA titre in batches in large quantities have been established for the first time. Optimum conditions for MEV inactivation were determined, and safe and effective inactivated vaccines with mineral oil or A1(OH)3 gel adjuvant were successfully prepared with serum-free cell-cultured MEV fluids. Both vaccines with different adjuvants can be manufactured in batches in large quantities and have been widely used all over China since 1986. The change laws of the imm