超支化聚氨酯固体电解质导电性能的光谱学研究

用超支化聚氨酯 +线性聚氨酯作为基体 ,LiClO4作为离子源制得聚合物固体电解质 .用Raman光谱 ,FTIR光谱等光谱学方法研究了聚合物电解质中盐离子和聚合物基团之间的相互作用 .研究表明超支化聚氨酯对盐有较好的溶解作用 .研究还表明超支化聚氨酯加入有利于提高体系的电导率     

Sulfonated poly(ether ether ketone)-based silica nanocomposite membranes for direct ethanol fuel cells

This paper reports on the preparation and characterization of sulfonated poly(ether ether ketone) (sPEEK)-based mixed matrix membranes. The inorganic matrix consisted of silica: Aerosil^®380, tetraethoxysilane (TEOS) or a combination of both to obtain an interconnected silica network. The behavior of these membranes in ethanol–water systems was studied for application in a direct ethanol fuel cell (DEFC). Uptake measurements showed that the converted TEOS content had a strong influence on the hydrophilicity of the membranes. Proton conductivity was strongly related to the water content in the membrane, but the proton diffusion coefficients of membranes with various Aerosil^®380–TEOS combinations were similar. Dynamic measurements in liquid–liquid (L–L) and liquid–gas (L–G) systems were performed to study the ethanol transport through the membrane. No reduction in ethanol permeability was obtained in the L–L system, but a remarkable reduction was obtained in the L–G system when 2 M ethanol was applied. The reinforcing characteristic of the combined Aerosil^®380–TEOS-system were best observed at 40 °C with 4 M ethanol. The fuel cell performance prediction based on the selectivity of proton diffusion coefficient to ethanol permeability coefficient showed for nearly all composite membranes an improvement with respect to the polymeric reference. The presence of an inorganic phase led to relatively constant proton diffusion coefficients and lower ethanol permeability coefficients in comparison with the polymeric reference.     

醋酸纤维素/PET接枝共聚物的制备及性能

以低数均分子量的聚对苯二甲酸乙二醇酯(PET)、二醋酸纤维素(CDA)为原料,异孚尔酮二异氰酸酯(IPDI)为接枝剂,二月桂酸二丁基锡(DBTDL)和离子液体1-丁基-3-甲基咪唑氯盐为催化剂制备得到新型的接枝共聚物CDA-g-PET。对接枝过程进行了优化,研究了催化剂种类与接枝剂用量对接枝过程的影响,利用红外分析和广角X射线衍射分析探究了接枝机理。同时对CDA-g-PET膜进行力学性能测试,探讨了PET的加入量对CDA-g-PET膜力学性能的影响。结果表明:PET通过化学键连接接枝到CDA上,接入的PET降低了CDA的结晶性;采用DBTDL与离子液体作为联合催化剂,接枝时间由7d缩短至8h;当接枝剂IPDI的加入量,即n(IPDI)/n(PET)为1.05~1.10时CDA-g-PET无交联;随着PET含量的增加,CDA-g-PET膜与CDA膜相比拉伸强度仅降低6.55%~27.24%,断裂伸长率增加149.89%~177.81%。     

EAST�춯̽�뽻��װ��������Ż�

通过计算得出EAST快动探针交换装置所用材料的理论厚度,运用CATIA绘图软件建立交换装置4mm盒形和筒形结构设计模型。将模型导入ANSYS软件进行前期处理和网格划分,运用有限元法对模型进行整体强度分析,获得了最大应力和应变数据。通过增加设计壁厚,建立了5mm不带加强筋筒形和盒形结构进行了有限元分析。通过对分析结果的优化和比较,得到5mm筒形不带加强筋方案的最大应力和应变最小,结构设计最优。最后,对模型制造了预研件并进行真空捡漏测试,测试结果满足设计要求。     

Neue schnelle Ionenleiter vom Typ MMIIICl6 (MI = Li,Na, Ag; MIII = In,Y)

Novel Fast Ion Conductors of the Type M M^IIICl₆ (M^I = Li, Na, Ag; M^III = In, Y) The ternary chlorides Li₃InCl₆, Na₃InCl₆, Ag₃InCl₆, and Li₃YCl₆ have been studied by difference scanning calorimetry, high-temperature X-ray, infrared, and high-temperature Raman methods. Impedance spectroscopic measurements exhibit fast ionic conductivity increasing in the sequence Na₃InCl₆ < Li₃YCl₆ < Ag₃InCl₆ < Li₃InCl₆. In the range of 300°C, Li₃InCl₆ is the best lithium ion conductor known so far (σ = 0,2 Ω^?1 cm^?1 at 300°C). With the exception of Na₃InCl₆, the chlorides exhibit complicated order-disorder phase transitions.     

固体电解质La2-xCaxMo1.7W0.3O9-δ(0≤x≤0.2)的合成、表征及电性能

在氧离子导体La₂Mo_1.7W_0.3O₉的基础上，采用固相法合成了La位掺杂的Ca系列新型氧化物La_2-xCa_xMo_1.7W_0.3O_9-δ(0≤x≤0.2)。通过XRD、Raman和XPS等手段对化合物结构进行表征，交流阻抗谱测试其电性能。结果表明：掺杂离子Ca²⁺的半径小于基质离子La³⁺的半径导致晶格收缩；Ca的掺杂在La₂Mo_1.7W_0.3O₉自身内置氧空位的基础上增加了额外的氧空位，提高了氧离子导体的电导率，550 ℃电导率由0.79 × 10^-4 S·cm^-1 (x=0.0)增加到1.5 × 10^-4 S·cm^-1 (x=0.16，0.2)，电导率增加89.9%。     

Ionic/electronic conductivity regulation of n-type polyoxadiazole lithium sulfonate conductive polymer binders for high-performance silicon microparticle anodes

Low-cost silicon microparticles(SiMP),as a substitute for nanostructured silicon,easily suffer from cracks and fractured during the electrochemical cycle.A novel n-type conductive polymer binder with excellent electronic and ionic conductivities as well as good adhesion,has been successfully designed and applied for high-performance SiMP anodes in lithium-ion batteries to address this problem.Its unique features are attributed to the stro ng electron-withdrawing oxadiazole ring structure with sulfonate polar groups.The combination of rigid and flexible components in the polymer ensures its good mechanical strength and ductility,which is beneficial to suppress the expansion and contraction of SiMP s during the charge/discharge process.By fine-tuning the monomer ratio,the conjugation and sulfonation degrees of the polymer can be precisely controlled to regulate its ionic and electronic conductivities,which has been systematically analyzed with the help of an electrochemical test method,filling in the gap on the conductivity measurement of the polymer in the doping state.The experimental results indicate that the cell with the developed n-type polymer binder and SiMP(~0.5 μm) anodes achieves much better cycling performance than traditional non-conductive binders.It has been considered that the initial capacity of the SiMP anode is controlled by the synergetic effect of ionic and electronic conductivity of the binder,and the capacity retention mainly depends on its electronic conductivity when the ionic conductivity is sufficient.It is worth noting that the fundamental research of this wo rk is also applicable to other battery systems using conductive polymers in order to achieve high energy density,broadening their practical applications.     

Buffers for the Physiological pH Range: Thermodynamics of the Second Dissociation of N-(2-Hydroxyethyl)piperazine-N′-2-hydroxypropanesulfonic Acid From 5 to 55°C

The second acidic dissociation constants pK ₂ of the ampholyte N-(2-hydroxyethyl) piperazine-N-2-hydroxypropanesulfonic acid (HEPPSO) have been determined at seven temperatures from 5 to 55°C from emf measurements utilizing hydrogen and silver–silver chloride cells without liquid junction. The thermodynamic quantities, G°, H°,S°, and C _p ^o have been calculated from the temperature coefficient of pK ₂. At 25°C, the pK ₂ = 8.042 and at 37°C, pK ₂ = 7.876; hence, buffer solutions of HEPPSO and NaHEPPSOate are important for pH control in the region close to that of clinical fluids (blood serum). Conventional pH values from 5 to 55°C as well as those obtained from liquid junction correction at 25 and 37°C have been reported for three buffer solutions with the compositions (molality scale): (1) equimolal mixture of HEPPSO (0.04 m) + NaHEPPSOate (0.04 m) + NaCl (0.12 m); (2) HEPPSO (0.08 m) + NaHEPPSOate (0.08 m); and (3) HEPPSO (0.08 m) + NaHEPPSOate (0.08 m) + NaCl (0.08 m).     

A THEORY OF EFFECTIVE THERMAL CONDUCTIVITY FOR MATRIX-INCLUSION- MICROCRACK THREE-PHASE HETEROGENEOUS MATERIALS BASED ON MICROMECHANICS

The effective thermal conductivity of matrix-inclusion-microcrack three-phase heterogeneous materials is investigated with a self-consistent micromechanical method (SCM) and a random microstructure finite element method(RMFEM). In the SCM, microcracks are assumed to be randomly distributed and penny-shaped and inclusions to be spherical, the crack effect is accounted for by introducing a crack density parameter, the effective thermal conductivity is derived which relates the macroscopic behavior to the crack density parameter. In the RMFEM, the highly irregular microstructure of the heterogeneous media is accurately described, the interaction among the matrix-inclusion-microcracks is exactly treated, the inclusion shape effect and crack size effect are considered. A Ni/ZrO₂ particulate composite material containing randomly distributed, penny-shaped cracks is examined as an example. The main results obtained are: (1) the effective thermal conductivity is sensitive to the crack density and exhibits essentially a linear relationship with the density parameter; (2) the inclusion shape has a significant effect on the effective thermal conductivity and a polygon-shaped inclusion is more effective in increasing or decreasing the effective thermal conductivity than a sphere-shaped one; and (3) the SCM and RMFEM are compared and the two methods give the same effective property in the case in which the matrix thermal conductivity λ₁ is greater than the inclusion one λ₂. In the inverse case of λ₁ < λ₂, the two methods agree as the inclusion volume fraction and crack density are low and differ as they are high. A reasonable explanation for the agreement and deviation between the two methods in the case of λ₁ < λ₂ is made. This work was supported by the National Natural Science Foundation of China and Chnese “863” High-Tech, Program.     

Thermal Conductivity of poly-p-phenylene-2,6-benzobisoxazole Film along the In-Plane Axis in the 10–300 K Temperature Range

The thermal conductivities of compression molded thin films of poly-p-phenylene-2,6-benzobisoxazole (PBO) were measured in directions along an in-plane axis in the 10–300?K temperature range by a steady-state heat flow method, with interest in the use of the material for superconductivity applications. The thermal conductivities of the PBO films increased from 0.3?W/mK to 9.0?W/mK with increasing temperature from 10?K to 300?K and these were much higher than those of polyimide films, epoxy resin and glass fiber reinforced plastics at all temperatures. The 9.0?W/mK at 300?K was 60% of that of stainless steel (SUS304). It was 6?W/mK at 150?K, which was half that of SUS304 and was 3.3?W/mK at 77?K, which was 33% of that of SUS304. The thermal conductivities of the PBO films were lower than those of a cloth of high strength ultrahigh molecular weight polyethylene fiber reinforced plastics in the 30?K–180?K temperature range and were almost equivalent to its values in the 180?K–300?K temperature range. The main contribution to the thermal conduction in the PBO films was from thermal phonon conduction along the molecular chains. Although many kinds of high thermal conductivity polymeric materials have been prepared by a uni-directional drawing process or by adding high thermal conductive additives, the PBO film showed high thermal conductivity without a uni-directional drawing process or high thermal conductive additive.