Chemically modified proton‐conducting membranes based on sulfonated polyimides: Improved water stability and fuel‐cell performance

A series of branched/crosslinked sulfonated polyimide (B/C‐SPI) membranes were prepared and evaluated as proton‐conducting ionomers based on the new concept of in situ crosslinking from sulfonated polyimide (SPI) oligomers and triamine monomers. Chemical branching and crosslinking in SPI oligomers with 1,3,5‐tris(4‐aminophenoxy)benzene as a crosslinker gave the polymer membranes very good water stability and mechanical properties under an accelerated aging treatment in water at 130 °C, despite their high ion‐exchange capacity (2.2–2.6 mequiv g^?1). The resulting polymer electrolytes displayed high proton conductivities of 0.2–0.3 S cm^?1 at 120 °C in water and reasonably high conductivities of 0.02–0.03 S cm^?1 at 50% relative humidity. In a single H₂/O₂ fuel‐cell system at 90 °C, they exhibited high fuel‐cell performances comparable to those of Nafion 112. The B/C‐SPI membranes also displayed good performances in a direct methanol fuel cell with methanol concentrations as high as 50 wt % that were superior to those of Nafion 112. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3751–3762, 2006     

Synthesis and application as polymer electrolyte of hyperbranched polyether made by cationic ring‐opening polymerization of 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxymethyl}‐3′‐methyl‐oxetane

A novel cyclic ether monomer 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxy‐methyl}‐3′‐methyloxetane (HEMO) was prepared from the reaction of 3‐hydroxymethyl‐3′‐methyloxetane tosylate with triethylene glycol. The corresponding hyperbranched polyether (PHEMO) was synthesized using BF₃·Et₂O as initiator through cationic ring‐opening polymerization. The evidence from ¹H and ¹³C NMR analyses revealed that the hyperbranched structure is constructed by the competition between two chain propagation mechanisms, i.e. active chain end and activated monomer mechanism. The terminal structure of PHEMO with a cyclic fragment was definitely detected by MALDI‐TOF measurement. A DSC test implied that the resulting polyether has excellent segment motion performance potentially beneficial for the ion transport of polymer electrolytes. Moreover, a TGA assay showed that this hyperbranched polymer possesses high thermostability as compared to its liquid counterpart. The ion conductivity was measured to reach 5.6 × 10^?5 S/cm at room temperature and 6.3 × 10^?4 S/cm at 80 °C after doped with LiTFSI at a ratio of Li:O = 0.05, presenting the promise to meet the practical requirement of lithium ion batteries for polymer electrolytes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3650–3665, 2006     

Characterization and electrical properties of polypyrrole/multiwalled carbon nanotube composites synthesized by in situ chemical oxidative polymerization

This study describes the preparation of polypyrrole (PPy)/multiwalled carbon nanotube (MWNT) composites by in situ chemical oxidative polymerization. Various ratios of MWNTs, which served as hard templates, were first dispersed in aqueous solutions with the surfactant cetyltrimethylammonium bromide to form micelle/MWNT templates and overcome the difficulty of MWNTs dispersing into insoluble solutions of pyrrole monomer, and PPy was then synthesized via in situ chemical oxidative polymerization on the surface of the templates. Raman spectroscopy, Fourier transform infrared (FTIR), field‐emission scanning electron microscopy (FESEM), and high‐resolution transmission electron microscopy (HRTEM) were used to characterize the structure and morphology of the fabricated composites. Structural analysis using FESEM and HRTEM showed that the PPy/MWNT composites were core (MWNT)–shell (PPy) tubular structures. Raman and FTIR spectra of the composites were almost identical to those of PPy, supporting the idea that MWNTs served as the core in the formation of a coaxial nanostructure for the composites. The conductivities of these PPy/MWNT composites were about 150% higher than those of PPy without MWNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1413–1418, 2006     

Memory switching of germanium tellurium amorphous semiconductor

The dc conductivity and switching properties of amorphous GeTe thin film of thickness 262 nm are investigated in the temperature range 303-373 K. The activation energy ΔE_σ, the room temperature electrical conductivity σ_RT and the pre-exponential factor σ₀ were measured and validated for the tested sample. The conduction activation energy ΔE_σ is calculated. The I-V characteristic curves of the thin film samples showing a memory switching at the turnover point (TOP) from high resistance state (OFF state) to the negative differential resistance state (NDRS) (ON state). It is found that the mean values of the threshold electrical field E_th decreased exponentially with increasing temperatures in the investigated range. The switching activation energy ΔE_th is calculated. Measurements of the dissipated threshold power P_th and the threshold resistance R_th were carried out at TOP point at different temperatures of the samples. The activation energies ΔE_R and ΔE_P caused by resistance and power respectively are deduced. The results obtained support thermal model for initiating switching process in this system.     

两两序列比对的一种新方法

本文研究DNA的两两序列比时,提出了基于快速沃尔什变换的新方法。经过计算模拟分析可知,比对的时间复杂度和空间复杂度明显降低.     

Thermal conductivity, dislocation density and GaN device design

The performance of high power transistor devices is intimately connected to the substrate thermal conductivity. In this study, the relationship between thermal conductivity and dislocation density is examined using the 3 omega technique and free standing HVPE GaN substrates. Dislocation density is measured using imaging cathodoluminescence. In a low dislocation density regime below 10⁵ cm⁻², the thermal conductivity appears to plateau out near 230 W/K m and can be altered by the presence of isotopic defects and point defects. For high dislocation densities the thermal conductivity is severely degraded due to phonon scattering from dislocations. These results are applied to the design of homoepitaxially and heteroepitaxially grown HEMT devices and the efficiency of heat extraction and the influence of lateral heat spreading on device performance are compared.     

Kinetic limit of a conservative lattice gas dynamics showing long-range correlations

An anisotropic lattice gas dynamics is investigated for which particles on ^d jump to empty nearest neighbor sites with (fast) rate ^–2 in a specified direction and some particular configuration-dependent rates in the other directions. The model is translation and reflection invariant and is particle conserving. The space coordinate in the fast-rate direction is rescaled by ^–1. It follows that the density field converges in probability, as 0, to the corresponding solution of a nonlinear diffusion-type equation. The microscopic fluctuations about the deterministic macroscopic evolution are determined explicitly and it is found that the stationary fluctuations decay via a power law (1/r ^d ) with the direction dependence of a quadrupole field.     

On the reliability of unsaturated hydraulic conductivity calculated from the moisture retention curve

In comparison with direct measurements of unsaturated hydraulic conductivity, the methods of calculations from the moisture retention curve are attractive for their fast and simple use and low cost. These are the main reasons for their increasing use, mainly in spatial variability studies. On the other hand, it is known that their applicability is limited. The possibility of the use of the retention curve to indirectly determine hydraulic conductivities is analyzed as follows. The theoretical derivation of the relationK(h) – (h) is briefly discussed with regards to potential sources of inaccuracy. The sensitivity of the algorithm forK(h) calculation is studied as a response to possible inaccuracies in the retention curve determination. Conclusions about the usability of calculated hydraulic conductivities are drawn.     

The elimination of fast variables in complex chemical reactions. III. Mesoscopic level (irreducible case)

The master equation for a complex chemical reaction cannot always be reduced to a simpler master equation, even if there are fast and slow individual reaction steps. Nevertheless the elimination of intermediates can be carried out with the help of the-expansion. This is illustrated with a well-known complex reaction: the dissociation of N₂O₅. It is shown that the intrinsic fluctuations in the N₂O₅ decay are larger than those implied by the master equation suggested by the macroscopic rate law.