Decomposition of N-cyclopropyl-N-nitrosourea in the presence of reducing agents as a new way of generating the cyclopropyl radical

A new way of generating cyclopropyl radicals in the base-catalyzed decomposition of N-cyclopropyl-N-nitrosourea in the presence of organic reducing agents (1-phenylpyrazolidin-3-one and 4-methoxyphenol) was developed. The cyclopropyl radical generated under these conditions can not only abstract a proton from the substrate to give cyclopropane but also form C-C or C-Br bonds in reactions with aromatic substrates or polybromomethanes. Dedicated to Academician O. M. Nefedov on the occasion of his 75th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 1934–1938, November, 2006.     

Hydrogen peroxide in basic media for whole blood sample dissolution for determination of its lead content by electrothermal atomization atomic absorption spectrometry

Hydrogen peroxide in basic media is proposed as a means for dissolving whole blood samples to be analyzed by electrothermal atomization atomic absorption spectrometry, ET AAS. Approximately 2 g of the whole blood sample were directly weighed in a 150 mL volumetric flask; 3 mL of a NaOH 0.2 mol L⁻¹ solution, two drops of 1-octanol, as an antifoaming agent, and 1 mL of 30% volume hydrogen peroxide were added to the flask to promote oxidation. The solution was then manually shaken and after approximately three minutes of shaking, a clear solution, with no apparent suspended solids or greasy layers, was obtained. Distilled-deionized water was used to complete the volume. Ten μL of the resulting solution along with 10 μL of a solution containing 5000 mg L⁻¹ of NH₄H₂PO₄ and 300 mg L⁻¹ of Mg(NO₃)₂ as a modifier, were injected into transversely heated graphite tubes for lead determination. Both aqueous standards and standard addition calibration curves produced results not significantly different at a 95% confidence limit level. Accuracy of the measurements was assessed by analysis of the IAEA A-13 (concentration of trace and minor elements in freeze dried animal blood) standard reference material containing 0.18 mg L⁻¹ lead on a dry basis and by means of recovery tests. Analysis of the IAEA A-13 standard produced 0.17 ± 0.02 mg L⁻¹ lead on a dry basis; recovery tests afforded values from 95 to 105%. Ten consecutive measurements of a 5 ppb lead solution gave a characteristic mass of 47.2 pg and a (3S) detection limit of 1.77 μg L⁻¹ Pb. Results obtained from analysis of whole blood samples of volunteer donors covered a lead concentration range between 8 and 21 μg L⁻¹ with a mean value of 11.9 ± 4.7 μg L⁻¹.     

The IINS, IR and DFT studies of hydrogen bonds in 6-Furfuryl and 6-Benzylaminopurines

FTIR and IINS spectra of 6-Furfurylaminopurine (6-FAP) and 6-Benzylaminopurine (6-BAP) taken at different temperatures have been analysed and compared with the spectra calculated by the ab initio DFT/B3LYP method and the semiempirical PM3 method in the isolated molecule approximation, for the tautomers N3-H, N7-H and N9-H, and dimers with hydrogen bonds. For 6-FAP the best agreement between the calculated and experimental (at 20 K) spectra has been found for the N9-H tautomer, whose structure was established by X-ray diffraction. For 6-BAP the analogous agreement for the N9-H tautomer structure has been poor and much better for the N7-H tautomer. The vibrational spectra calculated for dimers of the molecules studied involved in hydrogen bonds, permitted also an interpretation of the bands whose positions and FWHM in the FTIR spectra changed with temperature.     

Study of metal-loaded activated charcoals for the separation and determination of selenium species by energy dispersive X-ray fluorescence analysis

Conversion of adsorption properties of activated charcoal (C^∗) by metal modification towards selenite, selenate and seleno-dl-methionine (Se-Met) was studied. Several metals were included in modification studies and also a procedure was developed for the separation and independent determination of microgram quantities of these selenium species in aqueous solution. Selenium species were collected one by one from the same sample solution onto collector material by adsorbing them directly or after complex formation onto different metal-loaded activated charcoals (MgC^∗ and FeC^∗). The mass of selenium in these collectors was measured directly by energy dispersive X-ray fluorescence spectrometry (EDXRF). Detection limits for all three selenium species were better than 6 μg corresponding to concentration of 60 μg/l with 0.100 l of initial sample volume.     

Physico-Chemistry of the Limestone Sulphation Process

Aspects of the mechanism of the overall reaction between CaCO₃/CaO and SO₂/SO₃ under oxidizing conditions are discussed. The limestone and lime sulphation processes were carried out in a thermobalance under conditions relevant to atmospheric fluidized bed combustion. Sulphated samples, prepared in the form of cross-section particles, were examined in a scanning electron microscope by energy-dispersive X-ray and back-scattered electron imaging. Photomicrographs are presented. The reaction proceeded from the outer surface of the particles and along the pores. Surface textural changes during the reaction were considered. The layer of products was identified as controlling both the rate and extent of limestone/lime sulphation. In the products, two sulphur-bearing solids (CaSO₄ and CaS) were identified. The presence of CaS, which may cause difficulties in practice, is attributed to CaSO₃ disproportionation. This revised version was published online in August 2006 with corrections to the Cover Date.     

Electrospray ionization ion-trap multistage mass spectrometric study of sodium cationized aldobiuronic and pseudoaldobiuronic acid derivatives

Fragmentation mechanisms of electrospray ionization (ESI) mass spectrometry of aldobiuronic and pseudoaldobiuronic acid derivatives were elucidated by multistage mass spectrometric (MS(n), n = 2-5) measurements of selected ions. Characteristic under the conditions of ESI-MS analysis is the production of alkali metal (Na and K) cationized adducts. The probability the of locations of Na cations in per-O-methylated compounds was proved by quantum chemical calculations, using the Jaguar program. The most probably position of alkali metal attachment is the carboxy group of the methoxycarbonyl C-5 group of the uronic acid unit. Characteristic cleavages vary according the kind of O-derivatization. In most cases they take place on the acidic part of the dimer and at the interglycosidic oxygen atom. As a result, the criteria for the differentiation of aldobiouronic and pseudoaldobiouronic acids derivatives were elucidated.     

Determination of manganese in brain samples by slurry sampling graphite furnace atomic absorption spectrometry

A simple procedure for the determination of manganese in different sections of human brain samples by graphite furnace atomic absorption spectrometry has been developed. Brain sections included cerebellum, hypothalamus, frontal cortex, vermix and encephalic trunk. Two sample preparation procedures were evaluated, namely, slurry sampling and microwave-assisted acid digestion. Brain slurries (2% w/v) could be prepared in distilled, de-ionized water, with good stability for up to 30 min. Brain samples were also digested in a domestic microwave oven using 5 ml of concentrated HNO₃. A mixed palladium+magnesium nitrate chemical modifier was used for thermal stabilization of the analyte in the electrothermal atomizer up to pyrolysis temperatures of 1300 °C, irrespective of the matrix. Quantitation of manganese was conducted in both cases by means of aqueous standards calibration. The detection limits were 0.3 and 0.4 ng ml⁻¹ for the slurry and the digested samples, respectively. The accuracy of the procedure was checked by comparing the results obtained in the analysis of slurries and digested brain samples, and by analysis of the NIST Bovine Liver standard reference material (SRM 1577a). The ease of slurry preparation, together with the conventional set of analytical and instrumental conditions selected for the determination of manganese make such methodology suitable for routine clinical applications.     

Scattering spectra and colour of disperse systems of low-absorptive particles

In this article, the results of calculations of scattering spectra of low-absorptive spherical particles are presented. It was obtained using different approximate and numerical methods. The comparative evaluations of application of single scattering approximation, the average field approximation and of the methods of computer modeling on the basis of Monte-Carlo method on various scattering multiplicity were performed. The comparison demonstrates the good agreement of calculated results with experimental scattering spectra of eye lens. By using the obtained spectral data the colour coordinates are calculated. The regularities of changes in colour characteristics in dependence of disperse system parameters are analyzed.     

Spectral Studies on Some Pyrimidine Derivatives in Different Solvents

The electronic absorption spectra of 2-aminopyrimidine (compound I), 2-amino-4-methylpyrimidine (compound II), 2-amino-4,6-dimethylpyrimidine (compound III), 2-amino-4,6-dimethoxypyrimidine (compound IV), 4-amino-2,6-dimethylpyrimidine (compound V), and 4,5-diamopyrimidine (compound VI) have been measured in water and in a series of different organic solvents. The solvent effects on the spectra are discussed and the solvent induced spectral shifts are analyzed in terms of different solute–solvent interaction mechanisms, using the multiple linear regression technique.