Properties of<Emphasis Type="Italic">B</Emphasis><Subscript>c</Subscript> meson

The mass spectrum ofcb meson is investigated with an effective quark-antiquark potential of the form -α_c/r +Ar ^νwith ν varying from 0.5 to 2.0. TheS andP-wave masses, pseudoscalar decay constant, weak decay partial widths in spectator model and the lifetime ofB _cmeson are computed. The properties calculated here are found to be in good agreement with other theoretical and experimental values at potential index,ν = 1     

线性常微分方程的保线性变换及其应用

研究了线性常微分方程的保线性变换，得到任意两个二阶线性常微分方程等价的条件，并用于求解一类二阶线性变系数齐次常微分方程．对数学物理方法教学中怎样通过适当的变换把给定的二阶线性变系数齐次常微分方程化为可解的方程给出了合理解释。     

Solid phase extraction for analysis of biogenic carbonates by electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS): an investigation of rare earth element signatures in otolith microchemistry

Uptake of trace elements into fish otoliths is governed by several factors such as life histories and environment in addition to stock and species differences. In an attempt to elucidate the elemental signatures of rare earth elements (REEs) in otoliths, a solid phase extraction (SPE) protocol was used in combination with electrothermal vaporization (ETV) as a sample introduction procedure for the determinations by inductively coupled plasma quadrupole mass spectrometry (ICP-MS). Effects of various parameters, such as carrier gas flow rate, atomization temperature and chemical modification, were examined for optimization of the conditions by ETV-ICP-MS. Atomization was achieved at 2800 °C. Lower temperatures (i.e. 2600 °C) resulted in severe memory problems due to incomplete atomization. Palladium was used as a chemical modifier. It was found that an increase in Pd concentration up to 0.5 μg in the injection volume (70 μl) led up to four-fold enhancement in the integrated signals. This phenomenon is attributed to the carrier effect of Pd rather than the stabilization since no significant losses were observed for high temperature drying around 700 °C even in the absence of Pd. Preconcentration was performed on-line at pH 5 by using a mini-column of Toyopearl AF-Chelate 650M chelating resin, which also eliminated the calcium matrix of otolith solutions. After preconcentration of 6.4 ml of solution, the concentrate was collected in 0.65 ml of 0.5% (v/v) HNO₃ in autosampler cups, and then analyzed by ETV-ICP-MS. The method was validated with the analysis of a fish otolith certified reference material (CRM) of emperor snapper, and then applied to samples. Results obtained from otoliths of fish captured in the same habitat indicated that otolith rare earth element concentrations are more dependent on environmental conditions of the habitat than on species differences.     

Association Behavior of 4-Acylpyrazolone Derivative and Tertiary Amine of High Molecular Weight in Antagonistic Synergistic Extraction of Palladium

To find an effective extraction and removal method for palladium(II), which is one of the main fission products from an acidic nuclear spent fuel solution, the extraction behavior of palladium(II) from a nitric acid medium by an acidic chelating extractant, 1-phenyl-3-methyl-4-trifluoroacetylpyrazolone-5-one (HPMTP) and a tertiary amine of high molecular weight, tri-n-octylamine (TOA), has been studied by spectrophotometry. A noticeable antagonistic extraction effect was observed in the extraction system under the given conditions. To understand this phenomenon, a preliminary investigation was performed to explain the mechanism of this reaction. According to the theory of corresponding solutions (TCS), the association reaction between HPMTP and TOA is proposed in the organic phase. An associated species, HPMTP·TOA, formed through hydrogen bonding in a chloroform medium might be the main reason why an antagonistic extraction effect occurred. The association constant between HPMTP and TOA was calculated to be 2.86±0.05.     

Widrow-cellular neural network and optoelectronic implementation

A new type of optoelectronic cellular neural network has been developed by providing the capability of coefficients adjusment of cellular neural network (CNN) using Widrow based perceptron learning algorithm. The new supervised cellular neural network is called Widrow-CNN. Despite the unsupervised CNN, the proposed learning algorithm allows to use the Widrow-CNN for various image processing applications easily. Also, the capability of CNN for image processing and feature extraction has been improved using basic joint transform correlation architecture. This hardware application presents high speed processing capability compared to digital applications. The optoelectronic Widrow-CNN has been tested for classic CNN feature extraction problems. It yields the best results even in case of hard feature extraction problems such as diagonal line detection and vertical line determination.     

一种利用Gabor小波特征的目标跟踪方法

小波特征跟踪是一种新的目标跟踪方法。这种方法利用Gabor小波提取目标的边界特征来组成特征模板,并由小波滤波器系数组成特征向量。在跟踪过程中不断优化特征模板的旋转、尺度及平移等几何变形参数,使得小波特征向量值在最小平方和的意义上与初始值相匹配,从而实现目标旋转、尺度及平移等几何变形时的自动跟踪。实验表明,该方法能够有效地跟踪飞机、车辆等目标,并且能够抵抗全局亮度的变化和局部遮挡的干扰。     

Uniform estimate of the constant in the strengthened CBS inequality for anisotropic non‐conforming FEM systems

Preconditioners based on various multilevel extensions of two‐level finite element methods (FEM) lead to iterative methods which have an optimal order computational complexity with respect to the size of the system. Such methods were first presented in Axelsson and Padiy (SIAM. J. Sci. Stat. Comp. 1990; 20 :1807) and Axelsson and Vassilevski (Numer. Math. 1989; 56 :157), and are based on (recursive) two‐level splittings of the finite element space. The key role in the derivation of optimal convergence rate estimates is played by the constant γ in the so‐called Cauchy–Bunyakowski–Schwarz (CBS) inequality, associated with the angle between the two subspaces of the splitting. It turns out that only existence of uniform estimates for this constant is not enough but accurate quantitative bounds for γ have to be found as well. More precisely, the value of the upper bound for γ∈(0,1) is part of the construction of various multilevel extensions of the related two‐level methods. In this paper, an algebraic two‐level preconditioning algorithm for second‐order elliptic boundary value problems is constructed, where the discretization is done using Crouzeix–Raviart non‐conforming linear finite elements on triangles. An important point to make is that in this case the finite element spaces corresponding to two successive levels of mesh refinements are not nested. To handle this, a proper two‐level basis is considered, which enables us to fit the general framework for the construction of two‐level preconditioners for conforming finite elements and to generalize the method to the multilevel case. The major contribution of this paper is the derived estimates of the related constant γ in the strengthened CBS inequality. These estimates are uniform with respect to both coefficient and mesh anisotropy. To our knowledge, the results presented in the paper are the first such estimates for non‐conforming FEM systems. Copyright © 2004 John Wiley & Sons, Ltd.     

Existence and characterization of regions minimizing perimeter under a volume constraint inside Euclidean cones

We study the problem of existence of regions separating a given amount of volume with the least possible perimeter inside a Euclidean cone. Our main result shows that nonexistence for a given volume implies that the isoperimetric profile of the cone coincides with the one of the half-space. This allows us to give some criteria ensuring existence of isoperimetric regions: for instance, local convexity of the cone at some boundary point.

We also characterize which are the stable regions in a convex cone, i.e., second order minima of perimeter under a volume constraint. From this it follows that the isoperimetric regions in a convex cone are the euclidean balls centered at the vertex intersected with the cone.

     

加速牛顿迭代收敛的新方法

提出了加速牛顿迭代收敛的新思想，构造出一类加权牛顿迭代格式，通过选取最优加权因子，使得该格式具有高阶收敛性和较小的渐近误差常数。     

Internal standardization for the determination of cadmium,cobalt, chromium and manganese in saline produced water from petroleum industry by inductively coupled plasma optical emission spectrometry after cloud point extraction

In the present paper a procedure is proposed for the determination of traces of Cd, Co, Mn and Cr in petroleum industry produced water by inductively coupled plasma optical emission spectrometry. The procedure is based on cloud point extraction of these metals, as their dithizonate complexes, into the surfactant-rich phase of octylphenoxypolyethoxyethanol surfactant (Triton X-114). Extractions were carried out in solutions with salinities between 10‰ and 70‰. Since residual salinity in the surfactant-rich phase caused differences in its transport to the plasma, yttrium was used as an internal standard to correct for this effect. The simultaneous metal extraction procedure was optimized by response surface methodology using a Doehlert design and desirability function. Enhancement factors of 21, 21, 9 and 19, along with limits of quantification of 0.093, 0.20, 0.73 and 1.2 μg L^− 1, and precision expressed as relative standard deviation (n = 8, 20.0 μg L^− 1) of 5.8, 1.2, 1.7 and 5.7% were obtained for Cd, Co, Mn and Cr, respectively. The accuracy was evaluated by spike recovery tests on the high salinity water samples with salinity of 40 and 63‰.