Optimization and numerical simulation for the extraction system of the H- multicusp ion source

A new ion source has been designed and manufactured for the CYCLONE30 accelerator, which has a much advanced performance compared with the original. It is expected that the newly designed ion source extraction system will transport a very large percentage of the beam without deteriorating the beam optics, which is designed to deliver an H- beam at 30 keV. The accelerator assembly consists of three circular aperture electrodes made of copper. The simulation study was focused on finding parameter sets that raise the beam perveance as large as possible and which reduce the beam divergence as low as possible. Ion beams of the highest quality are extracted whenever the half-angular divergence is minimum, for which the perveance current intensity and the extraction gap have optimum values. The triode extraction system is designed and optimized by using CST software （for Particle Beam Simulations）. The physical design of the extraction system is given in this paper. From the simulation results, it is concluded that it is possible to achieve this goal by decreasing the thickness of the plasma electrode, shortening the first gap, and adjusting the acceleration electrode voltage.     

New insights into the extraction of uranium(VI) by an N,N-dialkylamide

This paper presents the methodology developed in order to thoroughly characterise a solvent extraction system containing high solute concentrations. The chemical system selected is N,N-(2-ethylhexyl)isobutyramide (DEHiBA) diluted in one alkane with increasing concentration of uranium(VI). Combining experiments with theoretical calculations allowed a deeper understanding of the extraction mechanism. A thermodynamic study was performed by the classical van't Hoff method and also by direct calorimetry to provide the enthalpies of extraction and specific heats. Dedicated methods like vapour pressure osmometry and electrospray ionisation mass spectrometry analysis provide information about the stoichiometry of the extracted species. Spectroscopic investigations with ultraviolet–visible and Fourier transform infrared probed the uranium coordination. Finally, a combination of molecular dynamics simulations, and small and wide-angle X-ray scattering experiments investigated the organisation in the organic phase beyond the molecular scale. It was shown that the high concentrations of uranium extracted have no influence on the stoichiometry of the complexes and the coordination of uranium in the inner sphere. The thermodynamic properties related to the extraction process and obtained with a fine consideration of the activity coefficients showed to be the same as those found with trace concentration. However, an unexpected organisation beyond the molecular scale was observed with an important role of nitrates as bridging ligands which could explain some physico-chemical properties. This approach could be applied to other chemical systems (other N,N-dialkylamides or other cations) to identify the origin of the different affinities between ligands and the difference of selectivity between cations.     

Depth information extraction with an aperture-rotating camera

This paper focuses on extracting depth information with an aperture-rotating camera. Compared with previous work, the proposed method is applicable for arbitrary rotation angle by making use of pixel registration to get pixel shift angle, and calculating the pixel shift along this angle. Besides, consumption time for shift angle is reduced by means of sampling. Compared with point-by-point method, the proposed method reduces the computation time from about 1 h to 1 min for a 15-megapixel image. Experimental results of a scene named “bottles” show that the depth value has a margin of error of 5%. Proposed method makes it possible to extract depth information with a single camera and expands the application of DSLR camera.     

对磺酸基苯基亚甲基若丹宁固相萃取光度法测定银

研究了对磺酸基苯基亚甲基若丹宁(SBDR)与银的显色反应,在pH为2.6的柠檬酸-氢氧化钠缓冲介质中,吐温-80存在下, SBDR与银反应生成2∶1稳定络合物,该络合物可用Waters Porapak Sep-Park固相萃取小柱富集,用乙醇(含5％乙酸)溶液洗脱后用光度法测定,在乙醇介质中λ_max＝520 nm,摩尔吸光吸数ε＝7.53×104 L·mol-1·cm-1。银含量在0～1.2 μg·(25 mL)-1内符合比尔定律,方法用于环境水样中银含量的测定,结果令人满意。     

超临界流体CO2萃取中药有效成分的抗氧化性的分光光度法研究

利用超临界流体二氧化碳萃取技术提取中药虎杖、大黄、炒白术中黄酮类化合物。在pH8．2的HCl—tris缓冲溶液中利用邻苯三酚自氧化法测定提取物对超氧阴离子自由基的消除作用。用茜素紫作显色剂的分光光度法在pH9．0的HCl—tris缓冲体系中测定中药提取物对Co^2 H2O2体系所产生的羟基自由基的消除作用,并对实验条件进行了探讨。实验结果表明,3种中药提取物对自由基都有消除作用,其中虎杖的效果最好。     

Enhancement of light-emitting efficiency using combined plasmonic Ag grating and dielectric grating

Based on the analysis of the near-field evanescent wave in total internal reflection, the flip-chip light-emitting diode (LED) structure was proposed by placing a plasmonic Ag grating and a perforated sapphire grating in the substrate. The finite difference time domain (FDTD) method has been applied to study the spectral properties of the hybrid structure and the enhancement factor of light extraction efficiency of the LED model. From the computation examples, the effects of structure parameters on the extraction enhancement have been investigated. The results indicate that the plasmonic grating can enhance the near-field evanescent wave and couple it to propagation wave in the specific wavelength bands, which leads to the photons emitting out of the LED chip with high extraction efficiency. Due to the combined gratings used, the enhancement factor of the light extraction efficiency can reach approximately 4 times at a relatively longer wavelength.     

啤酒酵母中β-(1-3)葡聚糖的提取及其性能分析

本文采用Sevage脱蛋白法、酸溶液浸提法、碱溶液浸提法对啤酒废酵母细胞壁中的β-(1-3)葡聚糖作了提取试验,并对所获多糖进行生化特性分析,阐述了碱溶液浸提法是从啤酒酵母中回收高质量β-(1-3)葡聚糖的理想途径．     

博落回生物碱的提取及分离工艺

采用正交实验方法研究博落回生物碱的盐酸提取工艺。结果表明：盐酸法提取的最佳工艺条件为：1．5％盐酸,固液比1：18,85℃提取3次,每次2h,提取率达到80．1％,与文献报道的醇提法相比其提取率提高20％左右。然后采用柱层析方法分离得到高纯度的血根碱和白屈菜红碱,并建立了一种HPLC法测定博落回中生物碱含量的方法。     

吸收峰混叠的太赫兹光谱区间组合特征提取算法

太赫兹光谱是物质识别的前沿方法之一。由于不同物质的分子组成或结构各异,许多物质的太赫兹吸收谱会在特定频率上出现吸收峰,可以作为混合物成分检测的重要特征。有效准确地提取这些吸收峰的参数,是提高识别率的关键。多峰拟合算法将光谱曲线拟合成若干个标准峰函数之和,能够同时提取到吸收峰的频率、峰高、峰宽等信息。但是该算法以寻峰算法结果为基础确定吸收峰的大致位置和数量,寻峰结果不一定是最优的拟合结果,而且很难准确识别定位混叠状态的吸收峰。为了提高混叠光谱中吸收峰的识别定位精度,提出以大幅度平滑后的曲线波谷为分界点,将预处理后的光谱分成若干个子区间。然后将子区间组合起来进行多峰拟合,通过遗传算法得到最优的拟合子区间组合和吸收峰频率近似值,拟合时每个子区间中通过峰数递增最优化方法确定拟合的吸收峰数,最后微调优化得到最优的吸收峰频率、峰高值。为了实现物质的识别,通过密度聚类算法得到同一类纯净物在多次测量中的共同吸收峰,以此作为标准数据,通过提出的基于吸收峰特征的光谱匹配算法实现了纯净物和不同含量混合物的快速识别。对10类纯净物的实际光谱数据进行拟合聚类,得到其吸收峰参数,结果与太赫兹光谱数据库一致。通过识别算法对纯净物测试集进行识别的识别率为100%,证明了特征提取和物质识别算法的有效性。对于含有混叠峰的混合物光谱,二阶导数法对葡萄糖-乳糖混合物光谱中被掩盖吸收峰(1.280 THz)的识别率仅为70%,提取到的频率平均值为1.316 THz;而该算法提高识别率至95%,频率平均值为1.281 THz,该算法提高了对混叠峰的分辨能力,能够精确定位混叠峰。对10类纯净物构成的6类不同程度混叠的二元混合物前二、三识别率分别达到90.8%和98.3%,提取到的特征能够有效应用于混合物的成分检测。该算法能够以纯净物数据为标准数据实现成分各异的混合物成分检测,对于太赫兹光谱混合物成分检测有重要意义。     

FFT动态相位重建算法的滤波窗影响分析

为了优化相位重建算法,针对波面干涉图的傅里叶频谱,分析了不同滤波窗口的分布特征和频谱响应,通过计算机仿真和实验测试,确定了FFT动态相位重建算法的最佳滤波窗口类型。其中处理仿真干涉图重建的波面与原始波面的波面峰谷值残差为0.008 5λ,波面均方根值残差为0.000 1λ;处理实验干涉图获得的波面与移相干涉测量法获得的波面峰谷值残差为0.009 3λ,波面均方根值残差为0.000 5λ。结果表明:选取Hamming窗进行滤波处理并重建的相位经拟合后得到的波面较参考波面的面形残差最小,相位重建精度优于0.01λ,可进一步应用于大口径光学元件的测量中。