Solvent extraction of sodium picrate with 15-crown-5 into carbon tetrachloride. The determination of the dimer-formation constant of a crown ether-univalent metal salt 1∶1∶1 complex

The theory is derived to determine the dimer-formation constant,K ₂, of a crown ethermetal salt 111 complex in organic solvents of low dielectric constant by solvent extraction. The theoretical predictions are verified experimentally by extraction of sodium picrate (NaA) with 15-crown-5 (15C5) into carbon tetrachloride. All the experiments were conducted at 25°C. The logK ₂ value of the Na(15C5)A complex in carbon tetrachloride has been determined to be 4.05±0.11. Moreover, the partition constant of the complex is calculated.     

Process improvement in acetone-butanol production from hardwood by simultaneous saccharification and extractive fermentation

The acetone-butanol production by simultaneous saccharification and extractive fermentation (SSEF) was investigated. In the SSEF employing cellulase enzymes andClostridium acetobutylicum, both glucan and xylan fractions of pretreated aspen are concurrently converted into acetone and butanol. Continuous removal of the fermentation products from the bioreactor by extraction was an important factor that allowed long-term fed-batch operation. The use of membrane extraction prevented the problems of phase separation and extractant loss. Increase in substrate feeding as well as reduction of nutrient supply was found to be beneficial in suppressing the acid production, thereby improving the solvent yield. Because of prolonged low growth conditions prevalent in the fed-batch operation, the butanol-to-acetone ratio in the product was significantly higher at 2.6–2.8 compared to the typical value of two.     

密闭微波辅助萃取当归粉中的阿魏酸

利用密闭微波样品制备系统(具有压力控制部件),对当归中的有效成分阿魏酸的萃取进行研究,比较了密闭微波萃取同超声波萃取和索氏萃取阿魏酸提取率的差异.结果表明:微波萃取与其他两种萃取方法相比,具有速度快和萃取率高的特点.并得到了阿魏酸提取的最佳条件:微波功率为400 W,萃取剂为90%的乙醇(体积分数),固-液比为1∶15,微波辐射为240 s,当归粒径为75μm.     

人参中总皂甙的超声波快速提取方法研究

建立了人参中总皂甙超声波半微量快速提取方法，与索氏提取法相比，此法提取时间由索氏法的1－2个工作日缩短到30min，节省大量试剂，综合提取效率提高数十倍，与索氏提取法对照分析表明，此法可完全满足人参中总皂甙的快速测定要求。     

Fast simultaneous determination of 23 veterinary drug residues in fish,poultry, and red meat by liquid chromatography/tandem mass spectrometry

The misuses of veterinary drugs can result in the accumulation of residues in food of animal origin that can make its way to the final consumer. Herein we describe a simple method for the accurate determination of beta-lactams, quinolones, sulphonamides, and tetracyclines in fish, poultry, and red meat. No extraction cartridges were used; instead, the extraction process consisted of the addition of an organic solvents, shaking, centrifugation, and dilution. An extensive validation process demonstrated an excellent linearity (R² ≥ 0.99) for 23-drug residues. The recovery of drugs in different matrices at two concentration levels (n = 6) was in the range of 82–119%. The method was proved to be repeatable and reproducible with intra/inter-day measurements (RSDs lower than 20%). The quantification limits of drug residues were in the range of 0.8 to 45.3 ug/kg, which is well below the maximum residue limits set by most regulatory authorities. This method was successfully applied to the routine analysis of 20 fish, poultry, and red meat samples (n = 60).     

Optimisation and validation of an automated solid phase extraction technique coupled on-line to enzyme-based biosensor detection for the determination of phenolic compounds in surface water samples

Summary A fully integrated screening system for phenolic compounds was developed incorporating on-line solid phase extraction, fractionation and biosensor detection. Two different types of biosensors, solid graphite and carbon paste electrodes incorporating the enzyme tyrosinase, were compared and used in the screening system. Interfacing of the solid phase extraction and fractionation with the biosensor detection was given special attention since the biosensors were not compatible with the organic modifier used for desorption of phenols from the solid phase extraction step. The system was validated with conventional analytical techniques. Surface water samples from the Ebro river were spiked with 1,10, and 25g L^–1 of catechol, phenol,p-cresol, respectively. Three out of seven samples were spiked and the correct samples were identified, containing phenols equivalent to the spiked concentrations.     

Sequential extraction of phosphorus in soil and sediment using a continuous-flow system

Distribution and mobility of phosphorus in soil and sediment are usually studied by sequential extraction. In the extraction procedure, a sample is treated with a series of reagents to distinguish the phases to which phosphorus is associated such as carbonate and iron or manganese oxides, etc. There have been a number of extraction schemes presented for phosphorus. At present, all of the existing schemes are carried out batchwise. Phosphorus contents derived from all sequences are operationally defined and depend on experimental conditions.An extraction procedure, which is a continuous-flow-based technique, was recently proposed by our group for metals in soils and sediments. The extraction is carried out in a closed chamber through which extractants are passed sequentially. In this paper, the system was investigated using the extraction scheme of Hieltjes and Lijklema to study distribution of phosphorus in three certified reference materials (CRMs). A number of fractions were collected for each reagent for subsequent colorimetric determination. The results are compared with those obtained from a batch extraction. The summation of phosphorus contents of all phases were compared with the certified values and with the values obtained from total digestion. These results have demonstrated that the continuous extraction system developed is also applicable for fractionation of phosphorus. Advantage and disadvantage are discussed.     

Liquid-liquid extraction of copper (I) and copper (II) as ion-paired complexes with acyclic 2-thienyl-containing polythioether and triphenylmethane dye anion

Three acyclic polythioethers containing 2-thienyl units at both ends were synthesized and the effect of substituent on the extraction of copper(II) was studied. The methyl groups in the terminal thiophene ring have imparted an appreciable degree of increase in the percent extraction of copper(II), while the introduction of chlorine atoms into the 2-thienyl unit resulted in the reverse effect. Among the counter dye anions examined, tetrabromophenolphthalein ethylester was the best one for copper(II) extraction. The composition of extracted species was evaluated to be 122 (Cu(II)/polythioether/dye anion). Quantitative extraction of copper(I) was attained as complexes with various triphenylmethane dyes, i.e., bromocresol green, bromothymol blue, bromo-phenol blue and pyrogallol red. Copper(I) in organic phase was completely back-extracted with 2 mole/l sulfuric acid containing 10% hydrogen peroxide.     

Chemical analysis of microcystins RR and LR in cyanobacterium using a prepacked cyano cartridge

Summary A new method for the determination of microcystins PR and LR in cyanobacterium was developed using cyano-type prepacked cartridges. The microcystins were extracted with 10% acetic acid and the extract applied to a Baker 10 cyano cartridge. After elution from the cartridge with 0.5M acetic acid-acetonitrile (19) the microcystins were determined by HPLC. Better recoveries and chromatograms were observed than with ODS cartridges.     

HPLC study of the binding of sulfinpyrazone to serum albumin

Summary A thin layer chromatographic method for a qualitative screening-test and a quantitative analysis of 2,4,6-TNT, biodegradation products, octogen and hexogen in ammunition wastes was developed using both polar and non-polar modified sorbents. For enrichment a solidphase extraction on LiChrolut® EN followed by removal with methanol/acetonitrile (11 v/v) was chosen. To imitate real samples, spiked tap water samples of known composition were used.