Investigation of Microemulsion System for Transdermal Drug Delivery of Amphotericin B

In order to solve the drawback of poor bioavailability by the oral route and infusion-related side effect for Amphotericin B(AmB), microemulsion vehicles composed of isopropyl myristate(IPM), Tween 80, isopropyl alcohol and water for transdermal delivery of AmB were designed. The pseudo-ternary phase diagrams were constructed by the H2O titration method and the structures of the microemulsion were determined by measuring electrical conducti-vities(σ). The diffusion studies of AmB microemulsion were performed via excised rabbit skin on a drug diffusion apparatus. To obtain a high solubization of AmB, three different methods were tested to incorporate AmB into mi-croemulsion. The result suggests adding AmB in the shape of NaOH solution to the O/W blank microemulsion over the phase inversion temperature(PIT) of the emulsifier obtains the maximum drug content(2.96 mg/mL). The pH value of the system could be adjusted to pH8.5 or pH<5.2, in this range AmB molecules converts from aqueous to the hydrophilic shell of the microemulsion droplets, drug precipitate is no more than 5%, and the formulations were corresponding to the characterizations of microemulsion. At pH 5.14, AmB microemulsion with Km 1:1, O/SC 1:9(mass ratio ofoil phase to surfactant/cosurfactant blend), water content 64.6%, drug content (2.93±0.08) mg/mL,showed the maximum permeation rate(3.255±0.64)μg·cm-2·h-1,which is stable for a long time.     

Synthesis and characterization of pH sensitive poly(glycidol)‐b‐poly(4‐vinylpyridine) block copolymers

Block copolymers of poly(glycidol)‐b‐poly(4‐vinylpyridine) were obtained by ATRP of 4‐vinylpyridine initiated by ω‐(2‐chloropropionyl) poly(glycidol) macroinitiators. By changing the monomer/macroinitiator ratio in the synthesis polymers with varied P4VP/PGl molar ratio were obtained. The obtained block copolymers showed pH sensitive solubility. It was found that the linkage of a hydrophilic poly(glycidol) block to a P4VP influenced the pK_a value of P4VP. DLS measurements showed the formation of fully collapsed aggregates exceeding pH 4.7. Above this pH values the collapsed P4VP core of the aggregates was stabilized by a surrounding hydrophilic poly(glycidol) corona. The size of the aggregates depended significantly upon the composition of the block copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1782–1794, 2009     

A novel route to prepare pH- and temperature-sensitive nanogels via a semibatch process

A novel method via a semibatch process in the absence of surfactant has been adopted to prepare pH- and temperature-sensitive nanogels. The shape, charge distribution, temperature, and pH-induced volume phase transition behavior of the latexes were investigated by scanning electronic microscopy, zeta potentials, dynamic laser light scattering, and UV/vis spectroscopy. It was found that, in the absence of surfactant, with increasing the amount of AAc from 5 to 20 mol% of N-isopropylacrylamide (NIPAM), the hydrodynamic diameters (D_H) decrease from 230 to 60 nm. With increasing pH value from 3 to 11, the D_H values increase slightly, which is different than the dramatic increase seen when using a conventional batch method with a range from 680 to 1700 nm. However, at pH 3, the turbidity curves of these kinds of particles increase dramatically at temperatures between 33 and 37 °C, while remaining constant at first and then increasing directly at pH 11. Furthermore, the distribution of carboxylic groups located not only on the interior but also on the exterior of colloidal particles as a result of adoption of the semibatch method, other than simple surface distribution of poly(NIPAM-co-AAc) latexes via the batch method.     

In situ monitoring of the H concentration change near an electrode surface through electrolysis using slab optical waveguide pH sensor

The H⁺ concentration change was monitored near an electrode surface through an electrolysis using a slab optical waveguide technique. Indium tin oxide transparent electrode modified by porous insulating polymer to which methyl red was covalently immobilized was used as a guiding layer, and the absorbance change of the polymer film was monitored. H⁺ generation at the vicinity of the electrode through the oxidation of ascorbic acid could be monitored by this technique.     

Redox,ionic strength,and pH sensitive supramolecular polymer assemblies

Formation of micelle‐type assembly from supramolecular complexation of a surfactant and an oppositely charged homopolymer is demonstrated. The lower CAC observed for these assemblies suggest that the electrostatic interaction provides an amphiphilic homopolymer‐like structure. The stimulus‐induced disassembly of these supramolecular structures has been accomplished with variations in redox characteristics, ionic strength, and pH of the medium. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1052–1060, 2009     

A THEORETICAL APPROACH TO P_(co_2) EVOLUTION IN THE ATMOSPHERE BASED ON ASSOCIATIONS OF SEDIMENTARY MINERALS

Based on the theory of pH evolution of sea water and the balance between the seawater and the atmosphere the authors discussed the problems about (i) the method ofcalculating P_(CO_2) in the ancient atmosphere with the associations of sedimentary miner-als; (ii) the evolution of P_(CO_2) values in the geologic history; (iii) the relations of thepH evolution of sea water with carbonate precipitations; and (iv) calculation of the pHlimit for some associations of sedimentary minerals and its corresponding P_(CO_2) valuesin the atmosphere. The authors pointed out that though carbonates had deposited little in the Archaean,the content of CO_2 gas in the Archaean atmosphere was very high and was gradually go-ing up to form a thick CO_2 atmosphere. Up to 2600 Ma ago, the P_(CO_2) had reached a gradeof 10- 50 atm. There was a general trend of evolution that from the early Proterozoicera to the present the depositional horizon of carbonate layers was gradually risingand finally surpassed the horizons of clay min     

Impact of Extracellular Polymeric Substance in the Inactivation of Harmful Algae by Ag2O/g-C3N4 under Visible Light

Photocatalysis has attracted much attention as an emerging algae removal technology, but the inactivation performance is inevitably affected by the extracellular polymeric substance (EPS) produced by algae. In this study, a photocatalyst (Ag₂O/g-C₃N₄) with efficient algae inactivation is adopted to investigate the interactions with EPS, and the impact of EPS on photocatalytic algae removal is studied. The results show that EPS can adhere to the surface of Ag₂O/g-C₃N₄ by electrostatic force. The interaction with EPS decreases the surface zeta potential of the Ag₂O/g-C₃N₄ from 7.71 to −22.3 mV with the increase in EPS concentration, and the maximum ratio of particle size increases from 825 to 1281 nm. In addition, the interaction with EPS inhibits the release of Ag⁺ in Ag₂O/g-C₃N₄ by half, thus, the toxicity of metal ions will be alleviated. Meanwhile, EPS can also be degraded by Ag₂O/g-C₃N₄, indicating that EPS can work as a radical scavenger to protect the algae cells. Without the protection of EPS, 97.8% of algae cells are inactivated after 5 h photocatalysis. Therefore, more attention should be given to the interaction between EPS and photocatalyst to promote the design and application of the photocatalytic.     

Anion and pH-regulated assembly of three Cd(II) coordination polymers based on 3,5-di(1H-benzo[d]imidazol-1-yl)benzoate

Three coordination polymers, {[CdI(DBBA)]?0.5H₂O}_n (1, DBBA = 3,5-di(1Hbenzo[d]imidazol-1-yl)benzoate), [Cd(DBBA)(CH₃COO)]_n (2) and [Cd(DBBA)₂]_n (3), were obtained through reactions between Cd(II) salts and 3,5-di(1H-benzo[d]imidazol-1-yl)benzoic acid under different pH conditions. Compounds 1 and 2 are 3-D frameworks with rtl topology based on different binuclear Cd(II) secondary building units. Compound 3 was formed at lower pH and showed a 1-D chain assembled with M₂L₂ ring units. Moreover, phase purities, thermal behaviors, and photoluminescent properties have also been investigated.     

Effect of Polyethylene glycol methyl ether blend Humic acid on poly (vinylidene fluoride-co-hexafluropropylene) PVDF-HFP membranes: pH responsiveness and antifouling behavior with optimization approach

Flat sheet asymmetric membranes were fabricated with homogeneous solution of poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-co-HFP) using N-methyl-2-pyrrolidone (NMP) as solvent via phase inversion method. PEGME (Poly ethylene glycol methyl ether) (M_n 5000) blend Humic Acid (HA), of different mole ratio was used as additive. Characterization of the membranes was done by Field emission scanning electron microscope (FESEM), Fourier Transform Infrared (FTIR) spectroscopy, Atomic force microscopy (AFM) and Differential scanning calorimetry (DSC) studies. Liquid-liquid displacement porosimetry (LLDP) study evaluated the morphological parameters, average pore size and pore size distribution. Bovine serum albumin (BSA) (M_W - 68,000 Da) was used to study the antifouling effect and pore blocking mechanism of the membranes. The pure water flux (PWF), solute rejection and flux recovery ratio drastically increases for the PEGME blended HA membranes whereas the water contact angle decreases significantly. The pH responsiveness character of the prepared membranes altered the hydraulic permeability and rejection % at different pH. Finally, optimization of the variables contributing towards the PWF and BSA rejection of the desired membrane was performed using Design expert software 9.0 TRIAL through ANOVA (analysis of variance) using the combination of response surface methodology (RSM) and central composite design (CCD).     

湿法脱硫浆液中Hg2+的还原机制研究

针对燃煤电厂湿法脱硫浆液中Hg²⁺易被还原的特性,研究Hg²⁺在模拟湿法脱硫系统中的迁移机制,考察了浆液温度、pH值以及SO₃^2-、Cl^-、Ca²⁺、Mg²⁺浓度等因素对Hg²⁺还原性能的影响。结果表明,Hg²⁺还原率随着浆液中SO₃^2-浓度的增大而降低;pH值对Hg²⁺的还原呈先增加后降低的趋势,在pH值为5.5时还原率最高;温度的升高不利于浆液中稳定的二价汞盐络合物存在,导致Hg²⁺还原率增加;Ca²⁺、Mg²⁺以及Cl^-浓度的增加有利于形成稳定化合物,从而抑制Hg²⁺的还原。