Aerosol‐Assisted Synthesis of Porous TiNxOy@C Nanocomposites

Porous TiN_xO_y‐based particles were synthesized by an aerosol spray process. At first, the starting sol solution containing the metal precursor and the nitrogen source is sprayed to form an aerosol that is subsequently pyrolysed at different temperatures. The obtained dried particles are an amorphous coordination “polymer” rich in carbon and nitrogen. These “glassy” particles are finally thermally treated at 800 °C, promoting the crystallization of the particles and the release of a major part of the carbon. As the particles keep their original shape, carbon loss and density increase during the crystallization step and lead to the development of an accessible pore structure. The process was analyzed and extended to the synthesis of other metal nitrides, such as VN and W₂N, thereby showing its general validity for the production of functional nanocrystalline nitride ceramics with high porosity still occupying a relatively small volume, and otherwise not easily accessible.     

聚丙烯酸钠吸收释放氮肥性能

研究了聚丙烯酸钠(PAANa)吸液率及其对氮肥的吸收释放性能。结果表明,尿素对PAANa吸液率没有影响,氯化铵使其吸液率大大降低,且浓度越大吸液率越小;PAANa对不同浓度尿素溶液的吸液率均为370 g/g,对质量浓度为5、10、15和20 g/L氯化铵溶液的吸液率分别为82、62、56和55 g/g。在尿素溶液中,分配系数(mkd)约为1,而在氯化铵溶液中,mkd>1,随着氯化铵浓度增大mkd减小;PAANa对尿素没有富集作用,对NH4 有富集作用;但PAANa对尿素的吸收容量约为NH4 的10倍。PAANa对吸收的尿素和NH4 均具有缓慢释放性能,在水中经4次浸泡(24 h/次),尿素和NH4 累积释放率分别在80%和60%左右;FT-IR分析表明,NH4 与树脂中阳离子发生了离子交换。     

Synthesis, Crystal Structure and Bioactivities of 1-（4-Chlorophenyl）-3- [ 5-（pyrid-4-yl）- 1,3,4-thiadiazol-2-yl] urea

The title compound 1-(4-chlorophenyl)-3-[5-(pyrid-4-yl)-1,3,4-thiadiazol-2-yl]urea (C14H10ClN5OS, Mr = 331.79) has been synthesized by the reaction of 2-amino-5-(pyrid-4-yl)- 1,3,4-thiadiazole with 4-chlorobenzoyl azide, and its crystal structure was determined by single-crystal X-ray diffraction. The crystal belongs to triclinic system, space group P with a = 5.8550(8), b = 7.5668(10), c = 16.416(2) , α = 78.364(2), β = 81.204(2), γ = 84.749(2)°, V = 702.58(16) 3, Z = 2, Dc = 1.568 g/cm3, μ = 0.429 mm-1, F(000) = 340, the final R = 0.0442 and wR = 0.1092 for 2001 observed reflections (I > 2σ(I)). X-ray diffraction analysis reveals that the title molecule is nearly planar. In the crystal structure, the molecules are linked by strong intermolecular N-H…N hydrogen bonds together with weak nonclassical intermolecular (C-H…Y, Y = N, O and Cl) hydrogen bonds and stacked through π-π interactions. The preliminary bioassay shows that the title compound exhibits good fungicidal activities against Rhizoctonia solani, Botrytis cinerea and Dothiorella gregaria.     

SYNTHESIS OF CROSS-CONJUGATED （p-PHENYLENE）S-POLY（p- PHENYLENEVINYLENE）S HYBRIDS WITH LOW CONTENT OF STRUCTURAL DEFECTS

The novel shish-kebab-type liquid crystalline cross-conjugated （p-phenylene）s-poly（p-phenylenevinylene）s hybrid was synthesized through Gilch polymerization. Their structures and properties were characterized by NMR, GPC, DSC, X-ray diffraction and polarizing optical microscope （POM）. ^1H-NMR investigation of the polymers indicates that the shish-kebab-structure has a strong ability to suppress the structural defects in the polymers. The polymers are enantiotropic liquid crystals. The melting point （Tm） of the polymers decreases when the length of the alkoxy tails of the mesogenic units increases. The mesophase was identified by X-ray diffraction method. They showed not only a smectic LC phase, but also a strong green fluorescence in chloroform. The maximum absorption band of the ＂kebabs＂ of the two, 5-bis（4＇- alkoxyphenyl）benzene at 280 nm did not appear in absorption spectra of the polymers. The same phenomena were also observed in the fluorescence spectra. These results imply that the polymers have formed a cross-conjugated uniform structure and achieved an extended n-conjugation polymer.     

MORPHOLOGY EVOLUTION IN PTFE AS A FUNCTION OF MELT TIME AND TEMPERATURE Ⅱ. LOW MOLECULAR WEIGHT FOLDED CHAIN SINGLE CRYSTALS AND BAND STRUCTURES

The effect of sintering dispersed and bulk, low molecular weight (Mn = 50,000 Da), nano-emulsion polytetrafluoroethylene (PTFE) particles near their melting point is described. With the nascent particles consisting of ca.75 nm diameter, hexagonal, single crystals, sintering at, e.g., 350℃, results, initially, in merger of neighboring particles,followed by individual molecular motion on the substrate and the formation of folded chain, lamellar single crystals and spherulites, and on-edge ribbons. It is suggested these structures develop, with time, in the mesomorphic "melt". Sintering of the bulk resin yields extended chain, band structures, as well as folded chain lamellae; end-surface to end-surface merger,possibly by end-to-end polymerization, occurs with increasing time.     

Ag/ZnO Catalysts with Different ZnO Nanostructures for Non‐enzymatic Detection of Urea

Silver coated ZnO nanorods and nanoflakes with different crystallographic orientations were synthesized by a combination of sputter deposition and solution growth process. Catalytic properties of morphology‐dependent Ag/ZnO nanostructures were then investigated for urea sensors without enzyme. Ag/ZnO nanorods on carbon electrodes exhibit a higher catalytic activity and an improved efficiency than Ag/ZnO nanoflakes on carbon electrodes. Ag/ZnO nanorod catalysts with more electrochemically surface area (169 cm² mg^?1) on carbon electrode facilitate urea electrooxidation due to easier electron transfer, which further promotes the urea electrolysis. The Ag/ZnO nanorod catalysts also show a significant reduction in the onset voltage (0.410 V vs. Ag/AgCl) and an increase in the current density (12.0 mA cm^?2 mg^?1) at 0.55 V vs Ag/AgCl. The results on urea electrooxidation show that Ag/ZnO nanostructures can be a potential catalyst for non‐enzymatic biosensors and fuel cells.     

4,6-二甲基-2-取代嘧啶的合成

采用改进的合成方法以乙酰丙酮分别与胍、硫脲、脲反应合成了三种2位杂原子取代的嘧啶类化合物,收率83．8％-98．6％,其结构经1^H NMR,IR和MS表征。     

煤中腐植酸与尿素相互作用机理的研究

采用化学法和波谱分析法对泥炭、褐煤、风化煤腐植酸（ＨＡ）与尿素的相互作用机理进行了研究。结果表明,ＨＡ与尿素之间发生了极其复杂的反应,包括离子化、络合配位、亲核加成、自由基反应及氢键缔合等,形成不同的化学键。羧基对反应深度的影响最大;含官能团（特别是羧基）最多的风化煤ＨＡ反应性最高。本项研究为有机长效尿素的研制提供了理论依据     

Mathematical Model and Numerical Simulation of Conductometric Biosensor of Urea

In this article, a mathematical model was developed to describe and optimize the configuration of the urea biosensor. The biosensor is based on interdigitated gold microelectrodes modified with a urease enzyme membrane. The model presented here focuses on the enzymatic reaction and/or diffusion phenomena that occur in the enzyme membrane and in the diffusion layer. Numerical resolution of differential equations was performed using the finite difference technique. The mathematical model was validated using experimental biosensor data. The responses of the biosensor to various conditions were simulated to guide experiments, improve analytical performance, and reduce development costs.