Variation of the Payne Effect in Natural Rubber Reinforced by Graft-Modified Carbon Black

Carbon black (CB) was modified by liquid grafting and used for natural rubber (NR) reinforcement. Payne effects during NR reinforcement by the graft-modified carbon black (GCB) were analyzed in this paper. The results showed a proportional relationship between filler content and the Payne effect. Rubber compounds with GCB presented weaker Payne effects than their non-modified counterparts. Qualitative analysis of the correlation between filler network structure and filler content was conducted according to the relationship between bound rubber of a rubber compound and shear modulus. The impact of the storage period on the Payne effect was further studied, and the results demonstrated that the longer the storage period of the rubber compound, the stronger the Payne effect tended to be. The mechanisms by which the Payne effects were manifested differed according to the content of the filler in the rubber.     

新型列车侧墙内装板声学分析、优化及应用*

为了开发与应用新型列车车体降噪内装结构,基于混合FE-SEA法对轨道车辆用新型橡胶泡棉夹芯板进行隔声与声辐射预测建模,并进行了试验验证,进而利用该模型分析了橡胶泡棉孔隙率与芯皮厚度比对其隔声性能、声辐射性能的影响规律,并通过敷设阻尼层优化了其声学性能。最后,在侧墙组合结构的声学设计中评价了其实际应用效果。结果表明：随着孔隙率的逐步下降,橡胶泡棉夹芯板隔声量上升趋势较为明显,而辐射声功率持续降低;随着芯皮厚度比的逐步提高,夹芯板隔声量呈略微上升趋势,辐射声功率则相应降低。在远离声源一侧的橡胶泡棉蒙皮外侧敷设阻尼层的效果最优,优化后夹芯板计权隔声量提高0.7dB,总声功率级降低0.7dB;相较于传统木质胶合板和铝蜂窝板,橡胶泡棉夹芯板相较于传统内装板材在结构隔声设计中具有轻量化优势。     

Adsorption of Nonionic Surfactant from Its Aqueous Solution onto Commercial Rubber

Adsorption of Ethoxylated Nonyl Phenol (ENP) surfactant from its aqueous solution onto a commercial tire cutting from different sites. Outer Peristalitic (O.P.), Outer Smouth (O.S.), and Internal Tire (I.T.) is studied after different immersion times, 24, 48, 72, and 144 hrs at 30° C. The adsorption isotherms are determined by a surface tension method. A two stepped L-type isotherm is characteristic below the CMC of ENP; above this concentration the isotherm deviates from the L-type and the slope of the isotherm increases sharply. A Langmuir fit has been found below the CMC of ENP. From the maximum amounts adsorbed at pseudo-plateau (T_max of the tested samples it was found that the efficiency of adsorption onto the rubber surface decreases in the order, O.P. > O.S. > I.T.     

钨酸钠/冰乙酸/过氧化氢作用下聚丁二烯橡胶环氧化及降解行为研究

本文研究了在钨酸钠/冰乙酸/过氧化氢催化体系作用下聚丁二烯橡胶环氧化及降解行为.采用红外(FT-IR)、核磁(1H-NMR)和气相凝胶渗透色谱(GPC)对降解产物进行了表征,结果表明60℃反应24h,聚丁二烯橡胶环氧度为21.27％,而其分子量没有明显降低.     

Experimental and numerical investigations of bi-injection moulding of PA66/LSR peel test specimens

Bi-injection moulding is a widely used process to manufacture engineering products and consumer goods. Typically, a thermoplastic is combined with rubber or another thermoplastic to create colour differences or hard and soft areas, respectively. The aim of this study was to optimise the injection parameters and processing conditions for the moulding of two-component standard peel test specimens with suitable functional properties. In this work, all parameters of thermo-rheo-kinetic behaviour were identified to predict the entire filling stage and the effect of a liquid silicone rubber cross-linking reaction during the injection moulding process. The models of Carreau-Yasuda and Isayev-Deng regarding the thermal dependence assumed by Arrhenius’ law were used. In our study, over-injection moulding is simulated and examined using finite element software (Cadmould 3D) to investigate the thermo-rheo-kinetic behaviour and the adhesion of liquid silicone rubber during the filling mould process in over-moulding. Numerical simulation results were then compared with the experimental results, and good agreement was obtained.     

Relaxation processes in the glassy state: Molecular aspects

Molecular relaxations in the glassy state of amorphous polymers are discussed, and related to the energy requirements of the various possible molecular motions involved under two broad headings: those occurring in groups pendant to the main chain and those occurring in the main chain units themselves. A variety of motions can result in relaxations in polymers with alkane side chains, whereas only rotation (or partial rotation) is possible for pendant phenyl rings. Relaxations in polymers with cycloalkane rings in the side chain can originate within the ring itself or from motion of the ring as a unit. Restricted movements of various types of backbone chain are discussed, and possible alternatives to the postulated crank-shaft motions in polymethylene chains are presented.     

The Use of Thermogravimetry in the Study of Rubber Devulcanization

Thermogravimetry was employed to study the changes occurring in rubber vulcanizates during devulcanization carried out by microwave treatment, a new promising method of recycling rubber waste. The thermogravimetric parameters T _i , T ₅ and T _p and the compositions of devulcanizates in comparison with vulcanizates were determined. The results obtained allowed estimation of the degree of destruction of the polymer chains in response to microwave treatment and permitted establishment of the most advantageous conditions of devulcanization in order to obtain the best properties of rubber devulcanizates for reuse in rubber processing. The results demonstrated that thermogravimetry is a very useful method for investigation and control of the microwave devulcanization process. This revised version was published online in August 2006 with corrections to the Cover Date.     

亲水性聚硅氧烷改性天然乳胶的性能

以亲水性聚硅氧烷KGF-903共混改性天然乳胶,通过拉力试验、老化试验、接触角测量和扫描电子显微镜等研究了聚硅氧烷的添加量对天然乳胶力学性能、抗老化性能、亲水性能和表面形貌的影响。结果表明,KGF-903含量在1.5%时拉伸强度有最佳的改性效果;KGF-903添加量约为3%时断裂伸长率达到最大,老化前后的断裂伸长率比改性前分别提高57%和50%。随着KGF-903含量的增加,改性天然乳胶片的水接触角逐渐减小;扫描电子显微镜观察的结果表明,添加聚硅氧烷能改变乳胶的分散状态。利用小试的最佳配方(即KGF-903的添加量为1.5%)生产了2批次医用导尿管,其表面光洁度、导尿管球囊的成品率、管身硬度、连接器与导尿管排泄锥形接口所承受的拉力和充气漏斗与引流漏斗连接处所承受的拉力等均有显著的提高,有效改善了产品的质量。