In vitro ageing and degradation of PEG-PLA diblock copolymer-based nanoparticles

Diblock copolymers composed of poly(oxy-ethylene) (POE) and poly(dl-lactic acid) segments were synthesized by anionic polymerization of d,l-lactide using the oxyanion formed by reaction of the monohydroxyl monomethoxy-poly(ethylene glycol) on sodium hydride. For comparison, a similar copolymer was prepared by using tin octoate to catalyze the lactide polymerization. The copolymers were used to make nanoparticles, which were stored at 4 °C. After a few months under these storage conditions, a dramatic decrease of the poly(ethylene glycol) content was observed, however, the mean diameter of the nanoparticles was not affected. The degradation of the nanoparticles was investigated in vitro under conditions selected to mimic physiological conditions. Changes of characteristics were monitored by ¹H NMR, SEC, DLLS and CZE on nanoparticles and/or on the degradation by-products dissolved in the ageing medium. According to their nanometric dimensions, the microparticles degraded very slowly and there was no difference in behaviour between the sodium hydride and the stannous octoate-derived copolymers.     

Synthesis and characterization of poly(ethylene oxide-co-ethylene sulfone)s and their precursors: Poly(ethylene oxide-co-ethylene sulfide)s

Three poly(ethylene oxide-co-ethylene sulfide)s with oxygen to sulfur ratios of 2/1, 2/2, and 1/2 were prepared by phase-transfer catalyzed polycondensations of (1) sodium sulfide and 1,2-bis (2-chloroethoxy)ethane, (2) 1,2-ethanedithiol and 1,2-bis(2-chloroethoxy)ethane, and (3) 1,2-ethanedithiol and 2-chloroethyl ether, respectively. A buffered solution with pH between the pK_a of the monothiol (RSH) and the pK_a2 of the dithiol (HS–R–SH), or H₂S, was needed to obtain high molecular weight polymers, which suggests that nucleophiles transfer and react as monoanions rather than dianions. These poly(ethylene oxide-co-ethylene sulfide)s were oxidized completely to poly(ethylene oxide-co-ethylene sulfone)s using 3-chloroperoxybenzoic acid as oxidant. Both the final polymers and the precursors have regular sequenced structures and are semicrystalline. As expected, their glass transition temperatures and melting points increase and solubilities decrease with the decrease of ether oxygen to sulfur ratio. © 1994 John Wiley & Sons, Inc.     

Effect of nature of support and impregnating agent on lipophilicity determination for nonionic surfactants by reversed-phase thin-layer chromatography

Summary The retention of 9 nonylphenyl ethylene oxide oligomers was determined in 15 reversed-phase chromatographic systems using silicone oils of various molecular mass as impregnating agents and silica, cellulose and alumina supports. The data were evaluated with principal component analysis carried out on the covariance and the correlation matrices. The R_M values did not follow the additivity rule and they did not change linearly with increasing length of the ethylene oxide chain. This is probably due to the folded state of the chain in the eluent. The molecular mass of the silicone oils had a negligible effect on the retention whereas the retention increased with increasing level of impregnation. The support considerably influenced the lipophilicity values of these nonionic surfactants and cellulose seemed to be the most appropriate support. Calculations proved that the application of a correlation matrix may cause data distortion; therefore, the use of a covariance matrix is strongly proposed.     

Block copolymerization initiated by Mn(III)-poly(ethylene glycol) redox system — general features and kinetics

The kinetics and mechanism of thermal polymerization of acrylonitrile initiated by Mn(III) pyrophosphate — poly(ethylene glycol) (PEG, molecular weight 6000) redox system in aqueous sulfuric acid medium was studied in the temperature range 30–60°C. The overall rates of polymerization and the disappearance of Mn³⁺ were determined. The polymerization was initiated by the organic free radical produced from the Mn³⁺-PEG reaction and the termination was by the metal ions. The rate of polymerization of acrylonitrile was found to be directly proportional to the square of the monomer concentration and first power of PEG concentration, and inversely proportional to the concentration of Mn³⁺. The rate of manganic ion disappearance was found to be directly proportional to manganic ion concentration and PEG concentration, and independent of the monomer concentration. Based on these observations, a plausible reaction scheme was suggested and suitable kinetic expressions were evaluated.     

Amphiphilic biodegradable poly(CL-b-PEG-b-CL) triblock copolymers prepared by novel rare earth complex: Synthesis and crystallization properties

Amphiphilic biodegradable poly(CL-b-PEG-b-CL) triblock copolymers have been successfully prepared by the ring-opening polymerization of ε-caprolactone (CL) employing yttrium tris(2,6-di-tert-butyl-4-methylphenolate) [Y(DBMP)₃] as catalyst and double-hydroxyl capped PEGs (DHPEG) as macro-initiator. The triblock architecture, molecular weight, thermal and crystallization properties of the copolymers were characterized by NMR spectra, SEC, DSC and WAXD analyses. The isothermal crystallization behavior of the copolymers was investigated by POM analysis in detail, which is greatly influenced by the length of PCL and PEG blocks. On the POM micrograph of PEG_10,000-(PCL₈₆₀₀)₂, a unique morphology of concentric spherulites was observed due to the sequent crystallization of the PCL and PEG blocks.     

Synthesis of model linear tetrablock quaterpolymers and pentablock quintopolymers of ethylene oxide

Multiblock copolymers of ethylene oxide, with four and five different blocks, were synthesized by the sequential anionic polymerization of styrene, isoprene, 2-vinyl pyridine, t-butyl methacrylate, and ethylene oxide with benzyl potassium as an initiator. The monomer sequence was based on the relative nucleophilicity of the active centers. Characterization of the multiblock copolymers by size exclusion chromatography (with refractive-index and UV detectors), membrane osmometry, and NMR spectroscopy confirmed that benzyl potassium is an efficient initiator for the synthesis of well-defined multiblock multicomponent copolymers of ethylene oxide. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2166–2170, 2002     

A revised quantum chemistry-based potential for poly(ethylene oxide) and its oligomers in aqueous solution

We have conducted a high-level quantum chemistry study of the interactions of 1,2-dimethoxyethane (DME) with water for complexes representing both hydrophilic and hydrophobic hydration. It was found that our previous quantum chemistry-based force field for poly(ethylene oxide) (PEO) and its oligomers in aqueous solution did a poor job in describing the hydrophobic binding of water to the ether, consistent with our recent calculations of the excess free energy and entropy of hydration of DME. Our original force field was revised to more accurately reproduce the interaction of water with the carboneous portions of DME. Molecular dynamics simulations of aqueous DME solutions using the revised quantum chemistry-based potential yielded good agreement with experiment for excess free energy, enthalpy, and volume as well as excess solution viscosity and the self-diffusion of water. Comparison with our original potential revealed that the relatively hydrophobic ether-water interactions in the new potential strongly reduced the favorable excess free energy and enthalpy but have relatively little influence on the excess entropy for dilute DME solutions. Other properties of DME and PEO solutions including conformational populations and dynamics, solution viscosity, hydrogen bonding, water translational and rotational diffusion and neutron structure factor as a function of solution composition were found to be largely unchanged from those obtained using the original potential.     

Metal complexes in catalytic transformations of olefins. 6. Mechanism of formation and characteristics of the precursors of active centers of ethylene dimerization to butene-1 in the Ti(O-n-Bu)4-AlEt3 system in ethers

Reaction of Ti(O-n-Bu)₄ (TBT) with AlR₃ (R = Me, Et,i-Bu) in solvents such as R₂O, Py, and Et₃N, reduces Ti(IV) to Ti(III), Ti(II), or Ti(I). The organotitanium compounds formed by the reaction of TBT with organoaluminum compounds (OAC) undergo homolytic decomposition at the bond in Ti-C. Isotopic exchange analysis using C₂D₄ suggested the formation of particles containing Ti-CH₂CH₂-Ti, Al-CH₂CH₂-Al, Al-CH₂CH₂-Ti, M=CHCH₃, and MMCHCH₃ (M, M = Al or Ti) fragments. An ESR spectral analysis established that reaction of TBT with TEA in R₂O, Py, and Et₃N environments produced two types of paramagnetic complexes, precursors of active centers of ethylene dimerization. The influence of various factors on the kinetics of accumulation and consumption of these complexes was investigated and their structures are suggested.Deceased.N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, 117913 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 7, pp. 1516–1525, July, 1992.     

Modulated differential scanning calorimetry in the glass transition region

Temperature-modulated calorimetry (TMC) allows the experimental evaluation of the kinetic parameters of the glass transition from quasi-isothermal experiments. In this paper, model calculations based on experimental data are presented for the total and reversing apparent heat capacities on heating and cooling through the glass transition region as a function of heating rate and modulation frequency for the modulated differential scanning calorimeter (MDSC). Amorphous poly(ethylene terephthalate) (PET) is used as the example polymer and a simple first-order kinetics is fitted to the data. The total heat flow carries the hysteresis information (enthalpy relaxation, thermal history) and indications of changes in modulation frequency due to the glass transition. The reversing heat flow permits the assessment of the first and higher harmonics of the apparent heat capacities. The computations are carried out by numerical integrations with up to 5000 steps. Comparisons of the calculations with experiments are possible. As one moves further from equilibrium, i.e. the liquid state, cooperative kinetics must be used to match model and experiment.On leave from Toray Industries, Inc., Otsu, Shiga 520, Japan.This work was supported by the Division of Materials Research, National Science Foundation, Polymers Program, Grant # DMR 90-00520 and the Division of Materials Sciences, Office of Basic Energy Sciences, U. S. Department of Energy at Oak Ridge National Laboratory, managed by Lockheed Martin Energy Research Corp. for the U. S. Department of Energy, under contract number DE-AC05-96OR22464. Support for instrumentation came from TA Instruments, Inc. Research support was also given by ICI Paints, and Toray Industries, Inc.     

A differential scanning calorimetry study on poly(ethylene terephthalate) isothermally crystallized at stepwise temperatures: multiple melting behavior re-investigated

The multiple melting behavior of poly(ethylene terephthalate) (PET) was investigated with differential scanning calorimetry (DSC) by examining PET samples having been subjected to special schemes of crystallization and annealing treatment at multiple descending temperatures. Upon such step-wise annealing in decreasing temperatures, the existence of doublet melting peaks in addition to a series of multiple minor peaks in the PET has been demonstrated using carefully designed thermal schemes. Using the Hoffman theory, multiple lamellae populations, might be suggested to be simultaneously present in the PET subjected to such thermal treatments. However, direct experimental evidence has yet to be provided. The low-temperature minor crystals simply melt during normal scanning without having time enough to reorganize into higher-melt crystals. Nevertheless, the effect of scanning on non-isothermal crystallization does exist but is primarily confined to the temperature range much below the main melting region where the crystallization of polymer chains can progress at a reasonable rate. At higher temperatures near the main melting region, annealing for extended times is required in order to result in relative changes of the melting endotherms of the upper and lower peaks in the main melting doublet. In all we have shown that interpretations of the multiple melting phenomenon in semicrystalline polymers can be better refined.