Plasticization and Crystallization of Poly(ethylene Terephthalate) Induced by Water

Commercial poly(ethylene terephthalate) (PET) was treated at R. H.>80% and room temperature for a set time. The glass transition temperature (Tg) decreases with the time of exposure to high humidity. The decrease in Tg is a result of plasticization. Our data indicate that the Tg of dry PET of 76-78°C may decrease to as low a temperature as 65-67°C when it is wet. Induced crystallization of PET in the presence of water reduces the cold crystallization temperature (Tc). The structure of water-induced crystals is imperfect and can be improved in perfection by annealing. This revised version was published online in July 2006 with corrections to the Cover Date.     

The modification and characterization of maleic anhydride-styrene-methyl metacrylate terpolymer by poly(ethylene adipate)

In this study, the functionality of maleic anhydride was utilized in the maleic anhydride-styrene-methyl metacrylate (MAStMMA) terpolymer. First, the polyester of poly(ethylene adipate), PEA, polycondensation copolymer was synthesized from ethylene glycol and adipic acid monomers. PEA was then modified on its maleic anhydride units in the MAStMMA terpolymer which has been synthesized previously. This modified copolymer was characterized by FTIR (Fourier Transform Infrared spectroscopy). The viscosimetric and thermomechanical characterization of MAStMMA terpolymer and its modified copolymer were also performed and the results were compared. The modified copolymer obtained was found to be more elastic and more soluble, and had lower viscosity and density.     

Intrinsic infrared absorption for carbon–fluorine bonding in fluorinated nanodiamond

1. Download : Download high-res image (155KB)
2. Download : Download full-size image

     

Poly[3-(3,4-dihydroxyphenyl)glyceric acid] from Stems of <Emphasis Type="Italic">Symphytum asperum</Emphasis> and <Emphasis Type="Italic">S. caucasicum</Emphasis>

Two high-molecular-weight (>1000 kDa) water-soluble preparations were isolated from stems of Symphytum asperum and S. caucasicum. Their basic component was established as poly[hydroxy-1-carboxy-2-(3,4-dihydroxyphenyl)ethylene], analogous to that of high-molecular-weight (>1000 kDa) preparations from roots of these same plants, using IR and NMR spectral data. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 303–305, July–August, 2005. An erratum to this article is available at .     

Exploring high pressure structural transformations,electronic properties and superconducting properties of MH2 (M = Nb,Ta)

The high-pressure structures and properties of MH₂ (M = Nb, Ta) are explored through an ab initio evolutionary algorithm for crystal structure prediction and first-principles calculations. It is found that NbH₂ undergoes a phase transition from a cubic Fm$\overline{3}$m structure with regular NbH₈ cubes to an orthorhombic Pnma structure with fascinating distorted NbH₉ tetrakaidecahedrons at 48.8 GPa, while the phase transition pressure of TaH₂ from a hexagonal P6₃mc phase with slightly distorted TaH₇ decahedron to an orthorhombic Pnma phase with attractive distorted TaH₉ tetrakaidecahedrons is about 90.0 GPa. Besides, the calculated electronic band structure and density of states demonstrate that all of these structures are metallic. The Poisson’s ratio, electron localization function, and Bader charge analysis suggest that these phases possess dominant ionic bonding character with the effective charges transferring from the metal atom to H. From our electron–phonon calculations, the calculated superconducting critical temperature T_c of the Pnma-NbH₂ is 6.903 K at 50 GPa. Finally, via the quasi-harmonic approximation method, the phase diagrams at pressure up to 300 GPa and temperature up to 1000 K of MH₂ (M = Nb, Ta) are established, where the transition pressure of Fm$\overline{3}$m-NbH₂ → Pnma-NbH₂ and P6₃mc-TaH₂ → Pnma-TaH₂ were found to decrease with increasing temperature.     

Copolymerization of ethylene and 1-butene with highly active Ticl4/THF/Mgcl2, Ticl4/THF/Mgcl2/SiO2, and TiCl3.1/3AlCl3 catalysts

Highly active catalysts for copolymerization have been prepared by the precipitation of MgCl₂/ToCl₄ complex with or without high surface area silica. Copolymerization of ethylene and 1-butene has been tested by using the prepared catalysts at various concentrations of 1-butene. The catalytic activities are 20–80 kg/g Ti h. The rate of copolymerization is strongly affected by the addition of 1-butene. The decay rate of copolymerization is first order with respect to time. Analyses of copolymers with solvent extraction, DSC, IR, XRD, and NMR were performed. Ethylene reactivity ratio (k₁₁) for TiCl₄/MgCl₂/THF catalyst is calculated to be about 26 by NMR spectrum. © 1994 John Wiley & Sons, Inc.     

Dielectric Studies of Glycine–Ethylene Glycol–Water Solutions Using Time Domain Reflectometry

Time domain reflectometry (TDR) has been used for dielectric relaxation measurements on the glycine–ethylene glycol–water ternary system (TDR) at 25, 30, 35, and 40°C in the frequency range from 10 MHz to 10 GHz. Glycine–ethylene glycol–water solutions are prepared with different concentrations of ethylene glycol (0, 5, 10, 15, 20, and 30%) and also for different glycine molar concentrations (0, 0.2, 0.4, 0.6, 0.8, and 1 M). The dielectric relaxation parameters are measured for aqueous glycine solutions also to compare the results with those for the glycine–ethylene glycol–water ternary system. For all the solutions considered, only one relaxation peak was observed in this frequency range. The complex permittivity spectra for the aqueous glycine solutions can be well described by the Cole–Davidson expression, whereas that for the ternary system can be well described by the Havriliak–Negami expression. The logarithm of the relaxation time log() shows a nonlinear relation with the glycine molar concentration that implies a change in the relaxation mechanism with glycine concentration. The dielectric strength increases with an increase in glycine molar concentration, whereas it decreases with an increase in ethylene glycol concentration.     

一种新型两性表面活性剂的合成

两性表面活性剂分子既含有阳离子亲水基,又含有阴离子亲水基,因而有其它表面活性剂所不具备的优异性能。本文将月桂酸和N-(2-羟乙基)乙二胺热缩合脱水,得到2-十一烷基-1-(2-羟乙基)-2-咪唑啉(1)。接着在还原剂的作用下,咪唑啉环碳氮双键还原并开环得到一般方法难以合成的N,N-二取代乙二胺(2)。(2)通过甲酰化(3)季铵化,引入两性离子,得到     

On products of reaction of imidazole with benzoyl chloride under conditions of the Regel-Buchel reaction

The reaction of imidazole with benzoyl chloride in pyridine affordedcis-1,2-bis(benzoyl-amino)ethylene (1) rather than 2-benzoylimidazole, as has been suggested previously. The structure of1 was confirmed by¹H NMR spectroscopy and X-ray diffraction study. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1593–1595, August, 1998.     

Effects of Poly(ethylene glycol) Doping on the Behavior of Pyrene, Rhodamine 6G, and Acrylodan-Labeled Bovine Serum Albumin Sequestered within Tetramethylorthosilane-Derived Sol-Gel-Processed Composites

We investigate the effects of controlled poly(ethylene glycol) (PEG) doping on the behavior of pyrene, rhodamine 6G (R6G), and acrylodan-labeled bovine serum albumin (BSA-Ac) sequestered within tetramethylorthosilicate (TMOS)-derived sol-gel-processed materials. To probe the dipolarity of the local environment within the composite we performed static fluorescence measurements on pyrene as the composites aged. We found that small levels of PEG loading effected significant enhancements in the local dipolarity surrounding the average pyrene molecule. Time-resolved fluorescence anisotropy measurements were used to follow the rotational reorientation dynamics of R6G as the composites aged. As the PEG loading increased, the R6G reorientational mobility increased. Nitrogen adsorption techniques were used to quantify the effects of PEG doping level on the surface area and final xerogel pore features. A large reduction in surface area was observed with PEG doping, but no detectable change in pore size was noted. The effects of PEG doping on a biomolecule were probed by following the time-resolved fluorescence anisotropy decay of BSA-Ac. These results showed that PEG doping resulted in increased biomolecule dynamics relative to that found for a neat, undoped TMOS-derived composites. Together these results show that PEG doping can be used to tune the sol-gel-processed composite dipolarity, alter the mobility of dopants sequestered within the composite, control analyte acessibility to the sensing chemistry, and modulate the internal dynamics within a biodopant.