PEO-LiClO_4-ZSM5 composite polymer electrolyte (IV): Polarized optical microscopy study

All solid-state lithium polymer batteries may be one of the best choices for the future electrochemical power source, characterized by high energy densities, good cyclability, reliability and safety[1,2]. Owing to its potential capability to replace the t…     

聚乙二醇在高真空条件下的单链弹性

在过去二十年间，高分子的单链弹性已经得到了广泛的研究.然而由于环境和高分子之间往往有着复杂的相互作用，实验中很难得到高分子在严格无扰状态下的单链弹性（即本征弹性）.为此，利用单分子力谱技术研究了高真空条件下聚乙二醇（PEG）的单链弹性.结果表明，由于高真空条件下溶剂分子的干扰被消除，PEG在这一准无扰状态下呈现其本征弹性.在非极性有机溶剂中，由于溶剂分子和PEG之间只有微弱的范德华力作用，PEG表现出和高真空中基本一致的弹性.然而，在不同环境中，力曲线的低力区（F<100 pN）存在着细微的差异.这一现象可归因于不同条件下基底与PEG链之间的吸附力不同.采用的高真空力谱可用于研究其他高分子单链在准无扰状态下的本征弹性.     

One-phase supported titanium-based catalysts for polymerization of ethylene. III. ESR spectra of the ternary system Sio2—R3Al—TiCl4

The ternary catalyst systems based on activated silica, aluminum alkyl, and titanium tetrachloride were polymerized in an ethylene gas-phase polymerization process, and further studied using ESR spectroscopy. Two types of titanium (III) ESR-active centers were observed and a linear dependence between the concentration of that characterized by a rhombic anisotropic signal with g₁ = 1.962, g₂ = 1.945, and g₃ = 1.913 values and catalyst productivity was found. © 1993 John Wiley & Sons, Inc.     

PEO／PBHE共混体系X射线散射研究

在聚环氧乙烷(PEO)/聚双酚A羟基醚(PBHE)共混体系中PEO是一个强质子受体,而PBHE是一个强质子给体,两者极易形成氢键,十分有利于形成互容对。笔者研究了PEO/PBHE共混体系的相容性,等温及非等温结晶动力学,本文根据Vonk提出的一维电子密度相关函数,分析了PEO/PBHE的SAXS现象,求得了共混体系的结晶度,片晶层厚度,过渡层厚度及长周期等结构参数。     

Reactions of trialkylalanes with cyclic acetals and orthoformates in CH2Cl2 and ClCH2CH2Cl as solvents

Under mild conditions, trialkylalanes (Et₃Al and Buⁱ ₃Al) in chlorine-containing solvents (CH₂Cl₂ or ClCH₂CH₂Cl) react with cyclic acetals and orthoformates to form glycol monoethers and dialkylacetals, respectively, in high yields. The ¹H NMR spectroscopic data demonstrate that CH₂Cl₂ or ClCH₂CH₂Cl interacts with Buⁱ ₃Al.     

Investigations of Imidazoles. 101. Synthesis of 2,3-Dihydroimidazo[1,2-a]pyrimidine from 2-Aminopyrimidine

Two novel preparative methods have been developed for the synthesis of 2,3-dihydroimidazo[1,2-a]pyrimidine from 2-aminopyrimidine. These are the reaction with 1,2-dibromoethane and also the reaction with ethylene chloro(bromo)hydrin, subsequent treatment of 1--hydroxyethyl-2-imino-1,2-dihydropyrimidine with thionyl chloride, and cyclization of the intermediate 1--chloroethyl-2-imino-1,2-dihydropyrimidine in the presence of sodium hydroxide.     

Poly(methacrylic acid-ethylene glycol dimethacrylate) monolith in-tube solid-phase microextraction applied to simultaneous analysis of some amphetamine derivatives in urine by capillary zone electrophoresis

A method based on in-tube solid-phase microextraction and capillary zone electrophoresis (CZE) was proposed for simultaneously determining four amphetamines (amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, and 3,4-methylenedioxymethamphetamine) in urine. A poly(methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary column, which can provide sufficient extraction efficiency, was introduced for the extraction of amphetamines from urine samples. The hydrophobic main chains and acidic pendant groups of the monolithic column make it a superior material for extraction of basic analytes from aqueous matrix. After extraction, the samples were analyzed by CZE. The best separation was achieved using a buffer composed of 0.1 M disodium hydrogen phosphate (adjusted to pH 4.5 with 1 M hydrochloric acid) and 20% methanol v/v, with a temperature and voltage of 25 degrees C and 20 kV, respectively. By applying electrokinetic injection with field-amplified sample stacking, detection limits of 25-34 microg/L were achieved. Excellent method of reproducibility was found over a linear range of 0.1-5 mg/L. Determination of these analytes from abusers' urine sample was also demonstrated.     

联萘冠醚的合成新方法

一种用于合成含联萘基冠醚的新方法。以消旋，手性联萘酚为起始原料，先与氯乙醇反应制得2,2'-二（2－羟基乙氧基）－1,1'－联二苯，再与二甘醇或三甘醇对二对甲苯磺酸酯反应，成功制得了4种联萘冠醚。     

Preparation of poly(N‐ethyl methacrylamide) particles via an emulsion/precipitation process: The role of the crosslinker

Monodisperse, thermosensitive poly(N‐ethyl methacrylamide) microgel particles were prepared by the batch precipitation/emulsion polymerization of water‐soluble N‐ethyl methacrylamide and the hydrophobic crosslinker ethylene glycol dimethacrylate initiated by potassium persulfate. Particular attention was paid to the effect of the crosslinker agent on the polymerization process (kinetics, conversion, and water‐soluble oligomer content). Particles were characterized in terms of their size distribution and swelling capacity. A polymerization mechanism for the water‐soluble monomer and non‐water‐soluble crosslinker is proposed and discussed on the basis of a combination of both emulsion and precipitation polymerization processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1808–1817, 2002