苯腙基乙酰基二取代乙酸乙酯的合成和晶体结构

报道了标题化合物C12H14N2O3(Mr=234.25)的合成和晶体结构.晶体属单斜晶系,P21/c空间群.晶胞参数:浕=0.84589(17)nm,b=1.7597(4)nm,c=0.82599(17)nm,α=90°,β=91.21(3)°,γ=90°,V=1.2292(4)nm3,Z=4,Dc=1.266g/cm3,μ=0.092mm-1,F(000)=496;偏离因子R=0.0760,Rw=0.1932.     

The formation of cation-ligand complexes of tributylammonium cation with diethyl carbonate,ethylene carbonate,propylene carbonate, 4-butyrolactone,ethyl acetate,and cyclopentanone ino-dichlorobenzene at 25°C

The effects of adding millimolar quantities of a series of compounds containing the carbonyl function on the conductances of solutions (0.2 mM) of tri-n-butylammonium picrate ino-dichlorobenzene solvent at 25°C have been measured. Values of the complex formation constants K ₁ ⁺ for 1:1 cation-ligand complexes are derived from these data. The corresponding values of –G ₁ ⁰ at 25°C are (in kcal-mole ^–1 ): 4-butyrolactone, 4.29; propylene carbonate, 3.87; ethylene carbonate, 3.59; cyclopentanone, 3.42; ethyl acetate, 2.84; and diethyl carbonate, 2.78. These results together with earlier results from this laboratory are discussed in terms of the effects of structure on cation-ligand affinity.     

药用缓释辅料——羟丙基甲基纤维素的合成及其缓释性能的研究

本文研究了药物缓释材料HPMC的合成方法,探讨了碱纤维素制备,醚化剂浓度,混合醚化剂配经以及产品后处理对高粘度HPMC的影响。本文还初步对KCl,氨茶碱,硝酸异山梨醇酯等药物采用合成的HPMC作辅料,进行了缓释制剂的研究,结果表明合成的HPMC具有满意的缓释性能。     

Influence of the heating conditions on the thermal and chemical behaviour of solid particles undergoing a fast endothermic decomposition

This paper deals with models describing the thermal and chemical behaviour of solid particles undergoing fast endothermic reactions under the influence of an external heat flux. The heat source temperature is supposed to be constant, to increase with time, or to deliver a simple thermal flash. It is shown that the pyrolysis conditions (reaction temperature, conversion, etc.) depend on the chemical characteristics of the reaction and also to a large extent on the external heating conditions. Relationships are proposed to take into account these parameters. The results are applied to the thermal decomposition of NaHCO₃. The pyrolysis of cellulose is finally chosen in order to show how these operating parameters can also affect the selectivity of a more complex reaction.     

导电复合材料葡萄糖氧化酶传感器的研究

报导了用乙基纤维素和乙炔黑获得的导电复合材料构成的葡萄糖氧化酶生物传感器的制备方法.讨论了多种因素对该生物传感器响应电流的影响.测得此电极酶催化反应的活化能为40.3 kJ•mol－1. AFM实验表明，用环己烷洗去石蜡的导电复合材料 葡萄糖氧化酶生物传感器具有粒状结构，这有利于酶催化反应的进行.     

Simple route to secondary amides of phosphorylacetic acids and their use for extraction and sorption of actinides from nitric acid solutions

An efficient method for the synthesis of secondary alkylamides of phosphorylacetic acids (APA) was proposed. The method involves amidation of ethyl phosphorylacetates with primary aliphatic amines. The scope of reaction was determined. Reactions with ethylenediamine and 1,4-diaminobutane yield the corresponding bisamides; in the case of 1,3-diaminopropane, N-(3-aminopropyl)diphenylphosphorylacetamide or N,N-propylenebis(diphenylphosphorylacetamide) was obtained, depending on the reaction conditions. The extraction of americium(III) complexes and the sorption of uranium(VI) by sorbents with physically sorbed APA from nitric acid solutions were studied. There is no correlation between the partition coefficient of americium(III) and the structure of APA; in the sorption of uranium(VI), the degree of extraction depends on the complexone structure.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2394–2402, November, 2004.     

Synthesis of inorganic-organic hybrids by incorporation of inorganic components into organic polymer using metal alkoxides

Inorganic-organic hybrids have been synthesized by incorporation of the inorganic component of Ti(OC₂H₅)₄ into the organic polymer of ethyl cellulose. The inorganic-organic hybrids did not dissolve in toluene used as a solvent for the starting materials. The ethanol was formed as a by-product of the alcoholysis condensation reaction between Ti(OC₂H₅)₄ and ethyl cellulose. These results suggest that ethoxy groups of Ti(OC₂H₅)₄ react with hydroxy groups of ethyl cellulose to form cross-linking bonds of –O–Ti–O–. The reaction of Ti(OC₂H₅)₄ with ethyl cellulose was further investigated by Fourier transform infrared (FT-IR) spectroscopy. The FT-IR spectroscopic experiments revealed that the Ti–O bond state of Ti(OC₂H₅)₄ was changed by refluxing a toluene solution of Ti(OC₂H₅)₄ with ethyl cellulose. The inorganic-organic hybrids have an interesting dielectric property; their dielectric constant is higher than that of ethyl cellulose and that of a simple mixture of TiO₂ and ethyl cellulose.     

消臭抗菌纤维素纤维的制备、结构和性能

采用一种制备消臭、抗菌纤维素纤维的新方法，即先将纤维素纤维用多元羧酸进行化学修饰，然后在铜溶液中处理，生成铜螯合纤维素纤维，用红外光谱、电子自旋波谱表征了该纤维的配位结构，消臭和抗菌实验结果显示，这种功能性纤维对硫化氢，氢气、三甲胺的消臭率分别达到100％，92．1％和80．4％，对金黄色葡萄球菌，大肠杆菌和白色念珠菌的抑菌率分别为79．14％，93．59％和82．50％，用X射线衍射，电子自旋波谱分析了该纤维吸附硫化氢，氨气、三甲胺的机理。     

Structures and hardness of ethyl halides and ethyl tosylate

Ab initio calculations (RHF) of EtX molecules (X=F, Cl, Br, I, or OTs) were carried out with the use of different basis sets. Total charges on the atoms in the compounds under study were determined by Mulliken's, NPA, and Bader's methods, and a comparison of these values was performed. For all EtX compounds, a topological analysis of the electron density was carried out within the framework of Bader's theory, and the global and relative local hardnesses of the above-mentioned ethylating agents were estimated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 608–612, April, 1998.