Biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyalkanoates) by metabolically engineered Escherichia coli strains

Biosynthesis of polyhydroxyalkanoates (PHAs) consisting of 3-hydroxyalkanoates (3HAs) of 4 to 10 carbon atoms was examined in metabolically engineered Escherichia coli strains. When the fadA and/or fadB mutant E. coli strains harboring the plasmid containing the Pseudomonas sp. 61-3 phaC2 gene and the Ralstonia eutropha phaAB genes were cultured in Luria-Bertani (LB) medium supplemented with 2 g/L of sodium decanoate, all the recombinant E. coli strains synthesized PHAs consisting of C4, C6, C8, and C10 monomer units. The monomer composition of PHA was dependent on the E. coli strain used. When the fadA mutant E. coli was employed, PHA containing up to 63 mol% of 3-hydroyhexanoate was produced. In fadB and fadAB mutant E. coli strains, 3-hydroxybutyrate (3HB) was efficiently incorporated into PHA up to 86 mol%. Cultivation of recombinant fadA and/or fadB mutant E. coli strains in LB medium containing 10 g/L of sodium gluconate and 2 g/L of sodium decanoate resulted in the production of PHA copolymer containing a very high fraction of 3HB up to 95 mol%. Since the material properties of PHA copolymer consisting of a large fraction of 3HB and a small fraction of medium-chain-length 3HA are similar to those of low-density polyethylene, recombinant E. coli strains constructed in this study should be useful for the production of PHAs suitable for various commercial applications.     

乳液聚合共聚物玻璃化转变温度及其理论计算

从共聚单体的竞聚率、油相水相分布系数出发,通过动力学模拟计算了丙烯酸丁酯与醋酸乙烯酯乳液共聚物的链结构,并用Johnson公式对其玻璃化转变温度(T_g)进行了理论计算,给出了共聚物T_g及其对应聚合物的重量分布图。发现半连续共聚物有1个T_g,其值随共聚物组成而变化;但一步法共聚物有两个T_g:低温区T_g代表富丙烯酸丁酯共聚物,高温区T_g则代表PVA均聚物。计算结果与实验十分吻合。     

两亲性丙烯酸酯共聚物的聚合研究

利用过氧化苯甲酰为引发剂探讨了甲基丙烯酸β－羟乙酯和丙烯酸长链烷基酯的自由基共聚合。重点讨论了合成条件如溶剂、沉淀剂、引发剂用量、单体配比、反应时间等对共聚反应的影响以及各种聚合条件对该共聚物的组成、结构和性能的影响。并用ＩＲ，ＧＰＣ，＾１３ＣＮＭＲ等手段对共聚物进行了表征。     

Dirhodium(II)-catalyzed carbonyl ylide generation. Stereoelectronic control in dioxolane formation

The combination of ethyl diazoacetate with aryl aldehydes in the presence of copper(I) or rhodium(II) catalysts results in the formation of 1,3-dioxolane products in moderate to good yields. These reactions occur through a pathway that involves ylide intermediates. Catalyst-dependent diastereocontrol is observed and suggests that metal-associated ylides are involved in the product-determining step. The influence of aryl aldehyde substituents has been determined. Current address. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 961–965, May, 1998.     

Effect of dimethylaminoethyl methacrylate on the graft copolymerization of ethyl acrylate onto hydroxypropyl methylcellulose in aqueous medium

Graft copolymerization of an ethyl acrylate (EA) and dimethylaminoethyl methacrylate (DMAEMA) monomer mixture onto water-soluble hydroxypropyl methylcellulose was investigated with potassium persulfate (KPS) as the initiator in an aqueous medium. The effects of introducing DMAEMA onto the graft copolymerization and the properties of the resulting latex that was produced were studied systematically. The optimum conditions for the graft copolymerization in terms of percentage of grafting and grafting efficiency were determined. The graft copolymer was characterized by Fourier transform infrared spectra, elemental analyses, nuclear magnetic resonance, transmission electron microscopy, and dynamic light scattering methods. The results suggest that the introduction of the DMAEMA monomer clearly accelerates the initial rate of the graft copolymerization, whereas the grafting parameters decrease significantly with increasing amounts of DMAEMA. These results can be attributed to the relatively large size of the DMAEMA molecule, its redox reaction with KPS, its hydrophilicity in water, and its chain transfer effect. The equilibrium humidity adsorption behavior and acid solubility of graft the copolymer films were also studied.     

A new strategy for the synthesis of α,β-diaroylpropionates promoted by samarium metal in DMF

When promoted by samarium in DMF, aroyl chlorides react readily with acrylates to afford α,β-diaroylpropionates in good to excellent yields without pretreating or activating the metallic samarium.     

Application of solid phase peptide synthesis to engineering PEO–peptide block copolymers for drug delivery

This work describes a simple, versatile solid-phase peptide-synthesis (SPPS) method for preparing micelle-forming poly(ethylene oxide)-block-peptide block copolymers for drug delivery. To demonstrate its utility, this SPPS method was used to construct two series of micelle-forming block copolymers (one of constant core-composition and variable length; the other of constant core length and variable composition). The block copolymers were then used to study in detail the effect of size and composition on micellization. The various block copolymers were prepared by a combination of SPPS for the peptide block, followed by solution–phase conjugation of the peptide block with a proprionic acid derivative of poly(ethylene oxide) (PEO) to form the PEO-b-peptide block copolymer. The composition of each block component was characterized by mass spectrometry (MALDI and ES-MS). Block copolymer compositions were characterized by ¹H NMR. All the block copolymers were found to form micelles as judged by transmission electron microscopy (TEM) and light scattering analysis. To demonstrate their potential as drug delivery systems, micelles prepared from one member of the PEO-b-peptide block copolymer series were physically loaded with the anticancer drug doxorubicin (DOX). Micelle static and dynamic stability were found to correlate strongly with micelle core length. In contrast, these same micellization properties appear to be a complex function of core composition, and no clear trends could be identified from among the set of compositionally varying, fixed length block copolymer micelles. We conclude that SPPS can be used to construct biocompatible block copolymers with well-defined core lengths and compositions, which in turn can be used to study and to tailor the behavior of block copolymer micelles.     

Additive telluromolybdates. Structure and catalysis in oxidation

Additive telluromolybdates, MoO₃·2TeO₂ and M^IIO·TeO₂·MoO₃ (M^IITeMoO₆; M^II = Co, Mn, Zn), converted ethyl lactate selectively to pyruvate in a vaporphase fixedbed flow system at 250–300 °C. A synergy in activity was observed for binary TeO₂–MoO₃, and crystalline Te₂MoO₇ was suggested as the active species. The Rietveld analysis of powder XRD patterns of ternary CoTeMoO₆ revealed the layer structure quite different from that of the reference Te₂MoO₇, but tellurium was again located adjacent to molybdenum linked through lattice oxygen.     

聚醚醚酮酮和含联苯聚醚醚酮酮共聚物的熔融热

根据Ｆｌｏｒｙ热力学统计理论和比容－熔融热作国法，由ＤＳＣ结果得到了不同联苯含量的聚醚醚酮酮－含联苯聚醚醚酮酮（ＰＥＥＫＫ－ＰＥＢＥＫＫ）共聚物的熔融热，两种方法获得的结果吻合。在此基础上给出了ＰＥＥＫＫ－ＰＥＢＥＫＫ共聚物不同联苯含量的熔点计算表达式。结果还表明，随着联苯含量ｎＢ，的变化，明显改变；当ｎＢ＝０．３５时，ＰＥＥＫＫＰＥＢＥＫＫ共聚物的值最小。     

取代肉桂酰甘氨酸酯的合成

在N-甲基吡咯烷酮(NMP)促进下,取代肉桂酸(1a^1g)与二氯亚砜(SOCl2)在20℃酰氯化反应0.5 h,再加入甘氨酸乙酯盐酸盐,在40℃下酰胺化反应4 h,n(取代肉桂酸)/n(SOCl2)/n(甘氨酸乙酯盐酸盐)=1.0/1.2/1.4,合成了一系列取代肉桂酰甘氨酸乙酯(2a^2g),其结构经1H NMR、13C NMR、IR和MS(EI)确证。并探讨了NMP促进取代肉桂酰甘氨酸乙酯反应可能的机理。