Catalytic Performance of One-Pot Synthesized Fe-MWW Layered Zeolites (MCM-22, MCM-36, and ITQ-2) in Selective Catalytic Reduction of Nitrogen Oxides with Ammonia

The application of layered zeolites of MWW topology in environmental catalysis has attracted growing attention in recent years; however, only a few studies have explored their performance in selective catalytic reduction with ammonia (NH₃-SCR). Thus, our work describes, for the first time, the one-pot synthesis of Fe-modified NH₃-SCR catalysts supported on MCM-22, MCM-36, and ITQ-2. The calculated chemical composition of the materials was Si/Al of 30 and 5 wt.% of Fe. The reported results indicated a correlation between the arrangement of MWW layers and the form of iron in the zeolitic structure. We have observed that one-pot synthesis resulted in high dispersion of Fe³⁺ sites, which significantly enhanced low-temperature activity and prevented N₂O generation during the reaction. All of the investigated samples exhibited almost 100% NO conversion at 250 °C. The most satisfactory activity was exhibited by Fe-modified MCM-36, since 50% of NO reduction was obtained at 150 °C for this catalyst. This effect can be explained by the abundance of isolated Fe³⁺ species, which are active in low-temperature NH₃-SCR. Additionally, SiO₂ pillars present in MCM-36 provided an additional surface for the deposition of the active phase.     

Fortschritte in der Auswertung von Markierungsversuchen an dynamischen Systemen

In einem dynamischen System vollziehen sich kontinuierlich ablaufende Stoffwandlungen, deren Ausgangsstoffe dem System ständig zufließen und deren Folgeprodukte das System kontinuierlich verlassen. Es wird das Verhalten eines solchen Systems mit drei Pools bei Markierungsexperimenten untersucht. Die Ergebnisse dieser mathematischen Untersuchungen werden auf die Erforschung des Stickstoffstoffwechsels laktierender Rinder mit Hilfe des stabilen Isotops ¹⁵N angewandt. In diesem Fall enthält das dynamische System zwei kleine stoffwechselaktive Pools und einen großen, niclit intensiv am Stoffwechsel beteiligten Körpereiweiβ-Pool.     

一种锌配合物用于炭疽生物标志物的检测

采用溶剂热合成方法,合成了一种新型金属配位聚合物{[Zn₂(L)(H₂O)(DMA)]·DMA·2.3H₂O}_n (1),其中L^4-为完全脱去质子的N,N''-二(4-羧基苄基)-5-氨基间苯二甲酸,DMA为N,N-二甲基乙酰胺。单晶X射线衍射结果显示,该配合物属于三斜晶系,空间群为P$overline{1}$,a=0.989 6(5) nm,b=1.370 5(5) nm,c=1.382 1(5) nm,α=80.067(5)°,β=76.729(5)°,γ=76.611(5)°,结构是由二维金属有机层通过π…π相互作用而扩展成的三维超分子骨架。红外光谱验证了锌离子与L^4-配体成功配位。粉末X射线衍射(PXRD)实验证实了配合物1具有较高的纯度。热重分析结果显示配合物1在室温至416.9 ℃区间内具有较好的热稳定性。在273 nm的激发光下,配合物1在437 nm处有较强的荧光发射,可以在30 s内快速检测乙醇溶液中的炭疽生物标志物——吡啶-2,6-二甲酸,具有选择性高、抗干扰能力强、检测限低(约为15 μmol·L^-1)等特点。结合PXRD图和紫外可见吸收光谱揭示了其检测机理为晶体骨架坍塌而诱导的荧光猝灭。     

Synthesis, Structure and H+/K+-ATPase Inhibitory Activity of Novel Triazolyl Substituted Tetrahydrobenzofuran Derivatives via One-pot Three-component Click Reaction

Eleven triazolyl substituted tetrahydrobenzofuran derivatives were synthesized in high yields as novel H⁺/K⁺‐ATPase inhibitor via one‐pot CuI‐catalyzed three‐component click reaction of azide, secondary amine and 3‐bromopropyne under mild conditions in water. Their structures were characterized by NMR, IR, ESI‐MS, elemental analysis and single‐crystal X‐ray diffraction analysis. Most of the target compounds exhibited better H⁺/K⁺‐ATPase inhibitory activity than commercial omeprazole with IC₅₀ values less than 15 µmol·L^?1. The initial structure‐activity analysis suggested that the triazole substituted by cycloalkyl, aromatic ring or O‐containing side‐chain seemed to be beneficial for enhancing the activity.     

The Synthesis and Biological Activities of [5-(4-Substituted Phenylsulfinyl/Sulfonyl)-1,3-Dimethyl-1H-Pyrazol-4-Yl]-Arylmethanones

Abstract

A novel series of pyrazole derivatives containing substituted phenylsulfinyl/sulfonyl group have been synthesized via the oxidation of intermediate pyrazole sulfoether with H₂O₂ in acetic acid. The novel compounds were characterized by melting point, ¹H NMR, FT-IR, MS, and elemental analysis or HRMS. The biological activity results showed that most of the title compounds exhibit significant fungicidal activities against Alternaria solani Sorauer, Phytophthora capsici, and Corynespora cassiicola.

[Supplementary materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental files: Additional text and figures.]     

Synthesis,thermal, and photocrosslinking studies of thermotropic liquid crystalline poly(benzylidene‐ether)esters containing α,β‐unsaturated ketone moiety in the main chain

A series of poly(benzylidene‐ether)esters containing a photoreactive benzylidene chromophore in the main chain were synthesized from 2,6‐bis(4‐hydroxy‐3‐methoxybenzylidene)cyclohexanone (BHMBCH) with various aliphatic and aromatic diacid chlorides by an interfacial polycondensation technique. The intrinsic viscosity of the synthesized homo and copolymers determined by Ubbelohde viscometer was found to be 0.12 to 0.17 dL/g. The molecular structure of the monomer and polymers was confirmed by FT‐IR, ¹H NMR, and ¹³C NMR spectral analyses. These polymers were studied for their thermal stability and photochemical properties. Thermal properties were evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). It was found that the polymers were stable up to 280 °C and start degrading thereafter. Increase in acid methylene spacer length decreased the thermal stability. The self‐extinguishing property of the synthesized polymers was studied by calculating the limiting oxygen index (LOI) value using a Van Krevelen's equation. The influence of the length of methylene spacer on phase transition was investigated using DSC and odd‐even effect has been observed. Hot‐stage optical polarizing microscopic (HOPM) study showed that most of the polymers exhibited birefringence and opalescence properties. The photolysis of liquid crystalline poly(benzylidene‐ether)esters revealed that α,β‐unsaturated ketone moiety in the main chain dimerises through 2π + 2π cycloaddition reaction to form a cyclobutane derivative and leads to crosslinking. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Imide‐functionalized naphthodithiophene based donor‐acceptor conjugated polymers for solar cells

Donor‐acceptor conjugated polymers containing a new imide‐functionalized naphthodithiophene (INDT) as the acceptor unit and a 2,2'‐bithiophene with varied substituents as the donor unit have been synthesized. The bandgaps of these polymers depend strongly on the dihedral angle of the 2,2'‐bithiophene unit. The 3,3'‐dialkoxy substitution (polymers PDOR / PBOR ) leads to near planar bithiophene conformation due to the well‐known S–O short contact, while the 3,3'‐dialkyl substitution (polymer PDR ) results in significant twisting due to the steric effect. Consequently PDOR / PBOR shows the lowest bandgap of 1.82/1.85 eV while PDR has a bandgap of 2.38 eV. Bulk‐heterojunction solar cells of the polymer/fullerene blends have been fabricated. Preliminary results show that PBOR gives the best device performance with power conversion efficiencies as high as 2.45% in air without any thermal annealing treatment, indicating the promising potential of INDT‐containing conjugated polymers for efficient solar cells. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3818–3828     

Synthesis of a benzoxazine with precisely two phenolic OH linkages and the properties of its high‐performance copolymers

A phenolic OH‐containing benzoxazine ( F‐ap ), which cannot be directly synthesized from the condensation of bisphenol F, aminophenol, and formaldehyde by traditional procedures, has been successfully prepared in our alternative synthetic approach. F‐ap was prepared by three steps including (a) condensation of 4‐aminophenol and 5,5'‐methylenebis(2‐hydroxybenzaldehyde) (1) , (b) reduction of the resulting imine linkage by sodium borohydride, and (c) ring closure condensation by formaldehyde. The key starting material, (1) , was prepared from 2‐hydroxybenzaldehyde and s‐trioxane in the presence of sulfuric acid. F‐ap is structurally similar to bis(3,4‐dihydro‐2H‐3‐phenyl‐1,3‐benzoxazinyl)methane ( F‐a, a commercial benzoxazine based on bisphenol F/aniline/formaldehyde) except for two phenolic OHs. The phenolic OHs can provide reaction sites with epoxy and 1,1'‐(methylenedi‐p‐phenylene)bismaleimide (BMI). The structure–property relationships between the thermosets of F‐ap /epoxy, F‐a /epoxy, F‐ap /BMI, and F‐a /BMI were discussed. Experimental data showed that thermosets based on F‐ap /epoxy and F‐ap /BMI provided much better thermal properties than those based on F‐a /epoxy and F‐a /BMI. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2686–2694