Temperature dependence of the properties of ternary systems ethanol + water + an aliphatic alkane (C6-C9)

The measures and calculation of different properties such as refractive index, density, speed of sound, excess molar volume, and isentropic compressibility of the ternary heterogeneous compounds by ethanol + water + (n-hexane, n-heptane, n-octane, n-nonane) have been performed in the range 288.15–323.15 K and atmospheric pressure. Attending to the accurate results of these models, the equation of state enclosing mixing rules is indicated as a simple estimation of the procedures of these properties for this kind of multicomponent systems.     

Bi2O3/FAp,a sustainable catalyst for synthesis of dihydro-[1,2,4]triazolo[1,5-a]pyrimidine derivatives through green strategy

The bismuth loaded on fluorapatite (Bi₂O₃/FAp) proved to be an excellent catalyst for the synthesis of novel dihydro-[1,2,4]triazolo[1,5-a]pyrimidine derivatives via a three-component reaction involving the mixture of 1H-1,2,4-triazol-5-amine, ethyl cyanoacetate or ethyl acetoacetate, and different benzaldehydes in ethanol at room temperature. The catalyst material was characterized by X-ray diffraction, Brunauer–Emmett–Teller surface area analysis, Fourier-transform infrared, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and transmission electron microscopy techniques. The efficacy of Bi₂O₃/FAp as a heterogeneous catalyst was evaluated with the loading of different wt% of bismuth on FAp. The 2.5% bismuth on FAp performed extremely well as a catalyst with a high yield of products (92%–96%) in a short reaction time (25–35 min). The catalyst was recovered by simple filtration. It showed undiminished activity up to five runs. Simple work-up, room temperature reaction, short reaction time, high yields, no column chromatography, and good reusability of catalyst are the merits of the proposed protocol. In addition, this process offers 100% carbon efficiency and 98% atom economy with noteworthy fiscal and environmental benefits.     

Investigation into the structural composition of hydroalcoholic solutions as basis for the development of multiple suppression pulse sequences for NMR measurement of alcoholic beverages

An eight‐fold suppression pulse sequence was recently developed to improve sensitivity in ¹H NMR measurements of alcoholic beverages [Magn. Res. Chem. 2011 (49): 734–739]. To ensure that only one combined hydroxyl peak from water and ethanol appears in the spectrum, adjustment to a certain range of ethanol concentrations was required. To explain this observation, the structure of water–ethanol solutions was studied. Hydroalcoholic solutions showed extreme behavior at 25% vol, 46% vol, and 83% vol ethanol according to ¹H NMR experiments. Near‐infrared spectroscopy confirmed the occurrence of four significant compounds (‘individual’ ethanol and water structures as well as two water–ethanol complexes of defined composition – 1 : 1 and 1 : 3). The successful multiple suppression can be achieved for every kind of alcoholic beverage with different alcoholic strengths, when the final ethanol concentration is adjusted to a range between 25% vol and 46% vol (e.g. using dilution or pure ethanol addition). In this optimum region, an individual ethanol peak was not detected, because the ‘individual’ water structure and the 1 : 1 ethanol–water complex predominate. The nature of molecular association in ethanol–water solutions is essential to elucidate NMR method development for measurement of alcoholic beverages. The presented approach can be used to optimize other NMR suppression protocols for binary water–organic solvent mixtures, where hydrogen bonding plays a dominant role. Copyright © 2014 John Wiley & Sons, Ltd.     

One step NaBH4 reduction of Pt-Ru-Ni catalysts on different types of carbon supports for direct ethanol fuel cells: Synthesis and characterization

The ternary catalyst Pt₇₅Ru₅Ni₂₀ was conducted on various types of carbon supports including functionalized Vulcan XC-72R (f-CB), functionalized multi-walled carbon nanotubes (f-MWCNT), and mesoporous carbon (PC-Zn-succinic) by sodium borohydride chemical reduction method to improve the ethanol electrooxidation reaction (EOR) for direct ethanol fuel cell (DEFC). It was found that the particle size of the metals on f-MWCNT was 5.20 nm with good particle dispersion. The alloy formation of ternary catalyst was confirmed by XRD and more clearly described by SEM element mapping, which was relevant to the efficiency of the catalysts. Moreover, the mechanism of ethanol electrooxidation reaction based on the surface reaction was more understanding. The activity and stability for ethanol electrooxidation reaction (EOR) were investigated using cyclic voltammetry and chronoamperometry, respectively. The highest activity and stability for EOR were observed from Pt₇₅Ru₅Ni₂₀/f-MWCNT due to a good metal-carbon interaction. Ru and Ni presented in Pt-Ru-Ni alloy improved the activity and stability of ternary catalysts for EOR. Moreover, the reduction of Pt content in ternary catalyst led to the catalyst cost deduction in DEFC.     

Intermetallic Pt2Si：magnetron-sputtering preparation and electrocatalysis toward ethanol oxidation

Although most transition metals have been tested as the promoter to Pt for electrocatalysis toward fuel cell reactions,semi-conductor elements,such as Si,have hitherto not been examined.Here we report a simple synthesis of intermetallic Pt2Si electrode using magnetron sputtering and the electrocatalysis toward ethanol oxidation reaction（EOR）.In comparison to Pt,the intermetallic Pt2Si surface turns out to be much more active in catalyzing the EOR：the onset potential shifts negatively by 150 mV,and the current density at 0.6 V increases by a magnitude of one order.Such an enormous enhancement in EOR catalysis is ascribed to the promotion effects of Si,which can not only provide active surface oxygenated species to accelerate the removal of COads,but also strongly alter the electronic property of Pt,as clearly indicated by the core-level shift in XPS spectrum.     

顶空气相色谱法测定瑞替加滨原料药中残留溶剂

建立了测定瑞替加滨原料药中残留溶剂乙醇、正己烷、四氢呋喃、三乙胺的顶空气相色谱方法。采用氢火焰离子化检测器,以N,N-二甲基甲酰胺为样品溶剂,通过对色谱条件优化,建立了以DB-624为分析柱、110℃为平衡温度、15 min为平衡时间的残留溶剂测定方法。经方法学验证,上述4种溶剂的方法检出限依次为0.007 5%、0.000 48%、0.002 4%、0.01%;峰面积的相对标准偏差均小于2.1%;平均回收率为100%～102%;4种溶剂的线性系数均大于0.995。结果表明,该方法的检测灵敏度高、精密度好、准确度高、线性关系良好,能够满足对瑞替加滨质量的控制要求。将该方法应用于3批瑞替加滨原料药的残留溶剂检测,均只检出乙醇和正己烷,且乙醇和正己烷的最高残留量分别为0.149%和0.022%,均未超出限量规定。     

Trifluoroethanol as a Metal-Free,Homogeneous, and Recyclable Medium for the Efficient One-Pot Synthesis of Dihydropyrimidones

Trifluoroethanol is an efficient and recyclable medium in promoting one-pot, three-component condensation reactions of β-ketoesters, aldehydes, and urea (or thiourea) to afford the corresponding dihydropyrimidones in good yields. This protocol does not require the use of an acid or base catalyst.     

The electrocatalytic behavior of electrodeposited Ni–Mo–P alloy films towards ethanol electrooxidation

Ternary Ni–Mo–P thin films have been electrodeposited from citrate‐based electrolyte onto graphite substrates for application as anode catalysts for ethanol electrooxidation. The operating deposition parameters were optimized to produce Ni–Mo–P alloy films of outstanding catalytic activity. The phase structure of the deposits was evaluated employing X‐ray diffraction technique. Morphology and chemical composition of the deposited alloy films were studied using scanning electron microscopy and energy‐dispersive X‐ray analysis, respectively. The results demonstrated that the rate of Ni–Mo–P deposition increases with increasing the ammonium molybdate concentration in the plating electrolyte up to 10 g l^?1. Also, the amount of Mo in the deposits increases with increasing the ammonium molybdate concentration up to 7.5 g l^?1, and the maximum Mo content in the film was 9.1 at.%. The catalytic activity of Ni–Mo–P/C alloy films has been evaluated towards electrooxidation of ethanol in 1.0 M NaOH solution by using cyclic voltammetry and chronoamperometry. The catalytic performance of the prepared anodes as a function of the amount of Mo was studied. The results showed an increase in the oxidation peak current density of ethanol with increasing the Mo at.% in the deposited alloy films. Additionally, Ni–Mo–P/C electrodes displayed significantly improved catalytic activity and stability towards electrooxidation of ethanol compared with that of Ni–P/C electrode. Copyright © 2013 John Wiley & Sons, Ltd.     

Dispersed Structure of Ethanol‐Gasoline Fuel According to Dynamic Light Scattering Method

The dispersed structures of mixtures of five different gasolines with anhydrous ethanol were investigated by the dynamic light scattering (DLS) method. The aim of the work was to find whether these blends are colloid systems. Influence of different parameters was investigated to verify the results of this research. Ethanol‐gasoline blends were found to be colloid systems with the drop size of 20–150 nm.     

扫帚状氧化铈制备及其对Pt基阳极催化剂催化性能的影响

采用水热合成法,合成了比表面积为175 m²·g^-1,孔径在2~4nm范围内的扫帚状CeO₂。通过微波辅助乙二醇还原氯铂酸法制备了Pt-CeO₂/RGO催化剂,探究扫帚状CeO₂的添加对Pt基催化剂电催化性能的影响。利用X射线衍射仪（XRD）、扫描电镜（SEM）、N₂吸附-脱附、X射线光电子能谱（XPS）对所制备的CeO₂及催化剂进行表征。利用电化学工作站对催化剂进行电化学性能测试。结果表明,催化剂中CeO₂保持原有扫帚状,Pt纳米粒子均匀分布于石墨烯载体表面;当m_RGO∶m_CeO2=1∶2时,添加了扫帚状CeO₂的Pt-CeO₂/RGO催化剂的电催化性能最优,电化学活性表面积为102.83 m²·g^-1,对乙醇氧化的峰值电流密度为757.17 A·g^-1,1 000 s的稳态电流密度为108.17 A·g^-1,对乙醇催化氧化反应的电荷转移电阻最小,活化能最低。