Synthesis and Some Transformations of 2-(3-Amino-1-Phenylpropyl)furan

A preparative method was developed for the synthesis of ethyl furfurylidenecyanoacetate. Its condensation with phenylmagnesium bromide gave ethyl α-cyano-β-(2-furyl)hydrocinnamate, the decarboxylation of which led to β-(2-furyl)hydrocinnamonitrile. Reduction of this nitrile with lithium aluminum hydride gave 2-(3-amino-1-phenylpropyl)furan. Some of its transformations were studied.__________Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 517–521, April, 2005.     

Differential protonation and dynamic structure of doxylamine succinate in solution using 1H and 13C NMR

A protonation and dynamic structural study of doxylamine succinate, a 1:1 salt of succinic acid with dimethyl-[2-(1-phenyl-1-pyridin-2-yl-ethoxy)ethyl]amine, in solution using one- and two-dimensional 1H and 13C NMR experiments at variable temperature and concentration is presented. The two acidic protons of the salt doxylamine succinate are in 'intermediate' exchange at room temperature, as evidenced by the appearance of a broad signal. This signal evolves into two distinct signals below about -30 degrees C. A two-dimensional 1H-1H double quantum filtered correlation experiment carried out at -55 degrees C shows protonation of one of the acidic protons to the dimethylamine nitrogen. A two-dimensional rotating frame 1H-1H NOE experiment at the same temperature reveals that the other proton remains with the succinate moiety. Comparison of the 1H and 13C chemical shifts and the 13C T1 relaxation times of the salt with those of the free base further substantiate the findings.     

Importance of the Debye interaction in organic solutions: Henry's law constants for polar liquids in nonpolar solvents and vice versa

Henry's law constants have been determined for -butyrolactone (BL), ethyl acetate (EA), and 2-methyl-3-pentanol (MEP) in mixtures of iso-octane (ISO) and toluene (TOL), for BL, EA, TOL, and ISO in cinnamaldehyde (CIN) and for TOL and ISO in each other and in BL. From these data and published vapor pressures, the activity coefficients at infinite dilution and the standard molar Gibbs free energy of transfer, G ₂ ⁰ of the solutes from dilute solution in ISO to dilute solution in each solvent medium have been calculated. The different behavior patterns of BL and EA are attributed to differences in their abilities to exist in different conformations possessing different dipole moments. For polar solutes, G ₂ ⁰ decreases with increasing polarizability of the solvent and with increasing dipole moment of the solute, suggesting increased contributions from dipole-induced dipole (Debye) interactions. The sigmoidal plot of G ₂ ⁰ against the change in pair potential energy calculated from the classical expressions suggests that G ₂ ⁰ seriously underestimates the strength of the Debye interactions in comparison with the London interactions.     

Additive telluromolybdates. Structure and catalysis in oxidation

Additive telluromolybdates, MoO₃·2TeO₂ and M^IIO·TeO₂·MoO₃ (M^IITeMoO₆; M^II = Co, Mn, Zn), converted ethyl lactate selectively to pyruvate in a vaporphase fixedbed flow system at 250–300 °C. A synergy in activity was observed for binary TeO₂–MoO₃, and crystalline Te₂MoO₇ was suggested as the active species. The Rietveld analysis of powder XRD patterns of ternary CoTeMoO₆ revealed the layer structure quite different from that of the reference Te₂MoO₇, but tellurium was again located adjacent to molybdenum linked through lattice oxygen.     

Hydrolysis and polycondensation of ethyl silicates. 2. Hydrolysis and polycondensation of ETS40 (ethyl silicate 40)

The effects of catalysts, pH and reaction conditions on the course of the hydrolysis and condensation of ETS40 (ethyl silicate 40), and on the composition of the reaction products were studied with the aid of gas and gel chromatography, potentiometry and gelation tests. Strong acids (HCl, HClO₄, HNO₃, H₂SO₄, p-toluenesulphonic acid), weak acids (Cl₃, CCOOH, ClCH₂COOH, (COOH)₂, CH₃COOH and HCOOH) and bases (LiOH, NH₄,OH) were used as catalysts.

The hydrolysis rate increased with increasing temperature, catalyst concentration, initial water concentration and initial ethyl silicate concentration, whereas it decreased with increasing number of Si atoms in the ethyl silicate molecules. At pH 0–7 the hydrolysis was acid catalysed, but at pH above 7.0 it was base catalysed. Simultaneously with the hydrolysis, condensation occurred at a rate which increased with increasing temperature, catalyst concentration, ETS40 concentration and, above all, with increasing initial water concentration. The condensation rate depended on the pH. The condensation was at its slowest for pH around 2.0. For pH below 2.0, the condensation increased with increasing hydrogen ion concentration; for pH above 2.0 the condensation increased with decreasing hydrogen ion concentration. Phosphoric acid and hydrofluoric acid increased the rate of condensation considerably. The reaction of ETS40 with water at pH around 2.0 gave rise during the hydrolysis to solutions of ethoxyhydroxysiloxanes with an average of 14–20 Si atoms in a molecule, which displayed long-term stability.     

(R)-2-羟基-4-苯基丁酸乙酯的合成

综述了血管紧张素转化酶抑制剂类治疗高血压和充血性心力衰竭药物的关键中间体（R）－2－羟基－4－苯基丁酸乙酯的合成方法。参考文献25篇。     

Preparation of poly(N‐ethyl methacrylamide) particles via an emulsion/precipitation process: The role of the crosslinker

Monodisperse, thermosensitive poly(N‐ethyl methacrylamide) microgel particles were prepared by the batch precipitation/emulsion polymerization of water‐soluble N‐ethyl methacrylamide and the hydrophobic crosslinker ethylene glycol dimethacrylate initiated by potassium persulfate. Particular attention was paid to the effect of the crosslinker agent on the polymerization process (kinetics, conversion, and water‐soluble oligomer content). Particles were characterized in terms of their size distribution and swelling capacity. A polymerization mechanism for the water‐soluble monomer and non‐water‐soluble crosslinker is proposed and discussed on the basis of a combination of both emulsion and precipitation polymerization processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1808–1817, 2002     

Polymer-Titanium hybrids obtained by radical polymerization and Sol-Gel process

The possibility to prepare hybrids made by poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA) and/or poly(ethyl acrylate) (PEtA) with TiO₂ was studied. The processes of polymer formation-radical polymerization and sol-gel process for inorganic network —were achieved simultaneously. Due to a high reactivity of titanium isopropoxide (TIP) in the sol-gel process, a complexant comonomer, allyl acetoacetate (AlAcAc), was used. Covalent bonds between polymer and inorganic chains were obtained by addition of trialkoxysilane derivates with vinyl (VTES) or methacryloyl (MPTS) groups. The presence of TIP inhibits the radical polymerization of vinyl acetate (VAc). The PVAc-TiO₂ hybrids were produced by the sol-gel process of TIP in the presence of pre-obtained PVAc. Except for VTES and MPTS, trialkoxysilane derivates with methyl (MeTES), octyl (OTES) and phenyl (PTES) groups were used. The thermal stability of hybrids is strongly affected by TiO₂ presence and by the type of trialkoxysilane derivates. The thermal stability of PVAc hybrids decreases in the presence of TiO₂ inorganic network. The glass transition temperature of polymers increases in the presence of the inorganic network.     

Hydrogenation of ethyl esters of 4-phenyl-and (2-furyl)-substituted 2,4-dioxobutyric acids at palladium black

The hydrogenation of ethyl 4-R-2,4-dioxobutyrates (R = phenyl, 2-furyl) at 5% Pt/Al₂O₃ catalyst, modified with cinchonidine, and at palladium black was investigated. The former had low activity under the conditions we tested. The main products during the hydrogenation of these compounds at palladium black are ethyl 4-R-2-hydroxy-4-oxobutyrates. The yield of the phenyl derivative amounts to 68.5%, while the yield of the corresponding 2-furyl derivative amounts to 97%. In the last case ethyl 2-hydroxy-4-oxo-4-(2-tetrahydrofuryl)butyrate was detected as impurity. The optimum conditions for the formation of ethyl 2-hydroxy-4-phenylbutyrate (yield 88.2%) were determined. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 655–659, May, 2006.