橡胶增韧环氧树脂机理的研究

本文研究了固化剂种类、环氧基体平均网链长度和分散相与基体间键合情况对体系韧性等的影响.结果说明,基体平均网链长度是一个更为重要的影响因素.分散相与基体间的化学键合也是重要的.文中对橡胶增韧环氧树脂的机理提出了见解.在交联密度较低的材料中,在橡胶颗粒附近叠加的应力场诱发下发生纵深度较大的断裂过程.分散相与基体间的化学键合增大该应力场强度有利于加大断裂过程区.     

脲醛树脂合成反应过程的FTIR研究

利用傅里叶变换红外(FTIR)光谱研究了脲醛树脂合成中不同结构形成和变化情况. 对FTIR谱图解析和分析的结果表明, 在脲醛树脂预聚物合成过程中, 随着甲醛与尿素反应的进行, 红外谱图特征峰发生有规律的变化, 酰胺II带特征峰波数逐渐低移, 有更多羟甲基、醚键和—NHCH2—结构基元形成, 固化反应使上述结构基元相应减少. 着重分析了不同甲醛与尿素摩尔比(nF/nU)下尿素与甲醛反应产物结构的变化, 随nF/nU的增加, 酰胺II带特征峰波数逐渐低移, 碱性条件下醚键和—NHCH2—结构基元明显增加, 在较强酸性条件下Uron环、亚甲基桥和羟甲基显著增加, 而—NHCH2—结构基元含量下降.     

6AZO-CONTAINING SELF-ASSEMBLY ULTRA-THIN FILMS AND THEIR PHOTOVOLTAIC PROPERTIES

A kind of azo-containing resin (Azo-R) was synthesized by a simple way through the coupling reaction of 2-nitro-N-methyldiphenylamine-4-diazoresin (NDR) with phenol, and a new covalentely attached multilayer film from Azo-R as H-donor and photosensitive diazoresin, diphenylamine-4-diazoresin (DR) as H-acceptor via H-bonding attraction by selfassembly technique has been fabricated. Following the decomposition of diazonium group of DR under exposure to UV light, the H-bonds between the layers of the film convert to covalent bonds and the film becomes very stable toward polar solvents or electrolyte aqueous solutions. Thus the UV-irradiated azo-containing films can be used to measure photocurrent in a conventional three-electrode photoelectrochemical cell using KCl as supporting electrolyte. It was confirmed that the azo-containing multilayer film is responsible for the photocurrent generation.     

仲碳伯胺萃淋树脂吸萃金的性能及机理

研究了仲碳伯胺（Ｎ１９２３）萃淋树脂吸萃金的机理，溶液酸效应、吸附等温线、吸附速率、盐析剂效应及柱操作条件的影响等，将该树脂用于矿样中金含量的测定，结果与７１７＾＃离子交换树脂吸附法一致，取得了较好的结果。     

流动注射在线阴离子树脂预富集火焰原子吸收测定痕量铜

研究了以阴离子交换树脂作吸附剂的流动注射在线微柱预富集火焰原子吸收测定铜的新方法。在最佳条件下富集１５０ｓ，富集２３倍，检出限０．２μｇ／Ｌ，ＲＳＤ为１．６％，分析速度２０次／ｈ。天然水样中可能存在的离子不干扰铜的测定。所建立的方法已用于水样中痕量铜的测定。     

环氧丙烯酸酯的紫外光固化

制备了适于配制紫外光固化涂料的环氧丙烯酸酯，研究了反应温度、阻聚剂、催化剂等因素对环氧树脂与丙烯酸反应的影响；讨论了反应机理和动力学；并利用红外光谱观察了产物的紫外光固化行为。季铵盐能有效地催化环氧树脂和丙烯酸的反应，当其用量为０．６％～１．２％时，在９０～１１０℃反应４．５～８小时后，环氧基转化率大于９７％。由此配制的光固化涂料经紫外光辐照能快速固化。     

自由体积与亲水性对环氧涂层防护性能的影响

报道了涂层聚合物自由体积和亲水性对涂层腐蚀防护性能影响的初步研究结果.实验表明,相对于自由体积,树脂的亲水性是决定树脂吸水率的更主要因素.低亲水性涂层腐蚀防护性能的提高主要源自到达涂层/金属界面的水量的显著降低.但由于采用活性酯固化的环氧树脂涂层中水通道的尺寸相对较大,水合离子扩散较容易,因此该类涂层覆盖下的金属基体被润湿部分的腐蚀趋势反而较一般涂层为大.     

酚醛树脂固化过程的红外光谱分析

利用红外光谱(IR)及其变温样品池、定量分析程序对酚醛树脂固化过程中的结构变化进行了研究,它对于酚醛树脂固化过程的质量控制具有重要意义。     

Thermal degradation of wood treated with guanidine compounds in air: Flammability study

Wood has been treated with guanidine phosphate, guanidine nitrate, guanidine carbonate and guanidine chloride to impart flame retardancy. The samples were subjected to differential thermal analysis (DTA) and thermogravimetry (TG) from ambient temperature to 800°C in air to study their thermal behaviors. From the resulting data, kinetic parameters for different stages of thermal degradation were obtained following the method of Broido. For the decomposition of wood and flame retardant wood, the activation energy was found to decrease from 116 to 54 kJ mol^–1; the char yield was found to increase from 5.6 to 34.9%, LOI from 18 to 41.5, which indicated that the flame retardancy of treated wood was improved. Effects of the different compounds on the degradation and flammability of wood have also been proposed.This revised version was published online in November 2005 with corrections to the Cover Date.