Curing reaction characteristics and phase behaviors of biphenol type epoxy resins with phenol novolac resins

Diglycidyl ether of 4,4′-dihydroxybiphenol (BPDGE) is a liquid crystalline epoxy. The biphenyl epoxy (diglycidyl ether of 3,3′,5,5′-tetramethyl-4,4′-biphenyl, TMBPDGE) has found great applications in plastic encapsulated semiconductor packaging. Phenol novolac (PN) was used as curing agent. The reaction kinetics of BPDGE/PN and TMBPDGE/PN systems in the presence of triphenylphosphine (TPP) were characterized by an isoconversional method under dynamic conditions using differential scanning calorimetry (DSC) measurements. The results showed that the curing of epoxy resins involves different reaction stages and the values of activation energy are dependent on the degree of conversion. The effects of curing temperature on their phase structure have been investigated with polarized optical microscopy and Wide-angle X-ray diffraction. With proper curing process, BPDGE showed a nematic phase when cured with PN.     

Synthesis of chiral 4-hydroxy-2,3-unsaturated carbonyl compounds from 3,4-epoxy alcohols by oxidation: application in the formal synthesis of macrosphelide A

An interesting transformation during the oxidation of 3,4-epoxy alcohols 1a-d, derived from the corresponding homoallylic alcohols, led to the formation of 4-hydroxy-2,3-unsaturated carbonyls 2a-d in very good yields. One of these products 2c was transformed into the functionalised carboxylic acid 5, an advanced stage intermediate from which the total synthesis of macrosphelide A has been reported.     

Cure kinetics of epoxy resin and thermoplastic polymer

The cure kinetics and morphology of diglycidyl ether of bisphenol A (DGEBA) modified with polyvinyl acetate (PVAc) using diaminodiphenylmethane (DDM) as hardener were investigated through differential scanning calorimetry (DSC) and environmental scanning electron microscopy (ESEM). Isothermal curing measurements were carried out at 150, 120 and 80°C. The kinetic parameters were obtained using the general autocatalytic chemically controlled model. The comparison of the kinetic data indicates that the presence of PVAc does not change the autocatalytic nature of the cure reaction. Two T _g’s were observed in the fully cured samples of the modified systems. ESEM micrographies confirm the biphasic morphology.     

Water absorption of a diglycidyl ether of bisphenol A/1,3-bisaminomethylcyclohexane (DGEBA/1,3-BAC) epoxy resin system

The diffusive and dynamic mechanical behavior of the DGEBA/1,3-BAC epoxy resin system was studied during water absorption. The diffusion of water was investigated at 100% relative humidity, by immersion of specimens in water at 60, 80 and 100°C. In all absorption experiments, water diffusion followed Fick's law. Diffusion coefficients and saturated water concentrations are given for these temperatures. The activation energy for diffusion was determined from the relationship between the diffusion coefficient and the reciprocal of the absolute temperature. The value obtained was 31.2 kJ mol^–1. Dynamic mechanical analysis of samples immersed in 100°C water and with various water contents showed both a shift of T_g, defined by thetan peak, to lower temperatures and a slight decrease in the dynamic modulus in the presence of water. These effects are probably a result of plasticization.This work was supported by the Xunta de Galicia through grant XUGA-17201A92.     

UV curable epoxy acrylate-clay nanocomposites

UV curable epoxy acrylates were reinforced with two different organically modified montmorillonites (MMTs) and an unmodified MMT. Conversion and rate of polymerization was monitored by real time infrared spectroscopy (RTIR) and photo-DSC. Microstructures were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and optical clarity. Optical clarity of the films containing clay was quite good as only a slight decrease was observed. Physical properties of the reinforced films were examined by differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), hardness and tensile testing. Enhancements in glass transition temperature (T_g), thermal stability and mechanical properties were observed. The films reinforced with the unmodified MMT exhibit the most significant enhancements in properties.     

Thermoanalytische Charakterisierung Strahlengehärteter Polymerfilme

Thermo-oxidative and thermo-mechanical stabilities of radiation-cured acrylates and epoxides were examined by TG, DMA and DSC.The polymeric trifunctional acrylates PETIA, TMPTA and THEIC displayed the highest temperatures of onset of degradation. The high crosslinking density of the films resulted in an almost temperature-independent complex E-modulus, as measured by DMA. With increasing degree of ethoxylation or propoxylation of the monomers, decreases in thermal stability and strength were found. For difunctional polymeric acrylates and epoxides, the glass transition temperature was measured.The average degree of curing of UV-cured epoxy films can be determined from the temperature of the maximum in the loss modulus (E_max.This revised version was published online in November 2005 with corrections to the Cover Date.     

Degradation Kinetics of an Epoxy/Cycloaliphatic Amine Resin Under Isothermal and Non-isothermal Conditions

A study of an epoxy-cycloaliphatic amine system has been realized using a thermogravimetric technique (TG). Isothermal and non-isothermal (dynamic) methods were employed to determine the kinetic data of this system. Five methods were used for determining the activation energies of this system in the dynamic heating experiments. In two of them (Flynn-Wall-Ozawa, and Kissinger) it is not necessary to have a prior knowledge of the reaction mechanism of the degradation behaviour for this system. In the other ones (Coats and Redfern, Horowitz and Metzger, and Van Krevelen et al.) it is necessary to know this reaction mechanism, besides Criado et al. method was used for determining it. The results have shown that good agreement between the activation energies obtained from all methods can be achieved if it is assumed that the degradation behaviour of this system is of sigmoidal-rate type. This revised version was published online in August 2006 with corrections to the Cover Date.     

The pockels coefficient of new polymers for nonlinear optics and its time dependence after poling,compared with dielectric measurements

Epoxy polymers with donor–acceptor type side groups were synthesized for application in nonlinear optics. The stability of the Pockels coefficient was measured in thin films after poling. The relaxation times and their temperature dependence seem to be correlated with dielectric measurements. Guest–host systems (polystyrene and polymethylmethacrylate with dimethylaminonitrostilbene) were investigated for comparison.     

Regioselective hydrosilations. III. The synthesis and polymerization of ambifunctional silicon-containing epoxy monomers

Silicon-containing epoxide compounds bearing Si ? H groups can be readily prepared in high yields by the regioselective rhodium-catalyzed monohydrosilation of α,ω-dihydrogen functional siloxanes and silanes with vinyl epoxides. The remaining Si ? H groups in these compounds can be further selectively hydrosilated with unsaturated epoxides to give a series of unique ambifunctional monomers containing two different epoxide groups in the same molecule. The photopolymerization of these monomers has been studied using analytical techniques including real time infrared spectroscopy and differential scanning photocalorimetry. On photopolymerization, the new monomers yield interesting networks. © 1993 John Wiley & Sons, Inc.