胺固化环氧酚醛树脂对Hg~(2+)的吸附性能

螯合树脂能与金属离子形成稳定的配合物,在无机、冶金、分析药物、催化、海洋化学、放射化学、环境保护各领域都有非常重要的应用[1-3]。我们曾以酚醛树脂为大分子骨架与多胺反应制备了一系列螯合树脂并对其结构及对多种金属离子的吸附性能进行了探讨[4,5]。本文则以线型环氧酚醛树脂为大分子骨架、多乙烯多胺为固化剂,制备了五种不同氮含量的氨基环氧酚醛螯合树脂,并考察其对金属离子Ｈｇ2+的吸附性能。1　实验部分1.1　仪器与试剂ＮｉｃｏｌｅｔＭＡＧＮＡ ＩＲ550(ＳｅｒｉｅｓＩＩ)红外分光光度计,ＳＨＡ-Ｃ水浴恒温振荡器,ＰＥ2000…     

Thermal behaviour of ethynyl and ethenyl terminated imide resins

A series of ethynyl and ethenyl end-capped imide resins were synthesised by the reaction of 9,9-bis(4-aminophenyl) fluorene (BAF) with pyromellitic dianhydride (PMDA)3/3′, 4,4′-benzophenone tetracarboxylic acid dianhydride (BTDA)/2,2-bis(3,4-dicarboxy phenyl) hexafluoropropane dianhydride (6F) and 3-ethynyl aniline/maleic anhydride. Structural characterisation was done by infra red and elemental analysis. Thermal characterisation was done by differential scanning calorimetry and thermogravimetric analysis. The decomposition temperatures of cured resins were above 200°C in nitrogen atmosphere. Char yield at 800°C ranged from 59–65.5%.     

PHEMA hydrogels obtained by a novel low-heat curing procedure with a potential for in situ preparation

In this work, we report on poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogels obtained by a low heat curing reaction. These materials are suitable for in situ preparation and therefore endowed with a potential for several biomedical applications. The novel procedure adopted involves as the first step the synthesis of a soluble oligomeric PHEMA precursor containing polymerizable functions as side substituents. As the second step, the precursor is dissolved in equal amounts of 2-hydroxyethyl methacrylate (HEMA) and water, to form a viscous but still injectable syrup. A low temperature water soluble initiator is then added. The curing reaction starts promptly and is completed within few minutes. During the entire process the internal temperature never rises above 40 degrees C. Preliminary mechanical characterizations performed on the hydrogels in their water-swollen state and diffusion tests in absorption/desorption experiments clearly indicated that on all respects the novel hydrogels are comparable with conventional PHEMA hydrogels obtained according to literature from HEMA in the presence of divinyl crosslinkers. However, the much shorter curing time combined with the far lower curing temperature endow the new hydrogels with a higher potential in view of specific surgical requirements, and particularly for in situ preparation.     

环氧丙烯酸酯的紫外光固化

制备了适于配制紫外光固化涂料的环氧丙烯酸酯，研究了反应温度、阻聚剂、催化剂等因素对环氧树脂与丙烯酸反应的影响；讨论了反应机理和动力学；并利用红外光谱观察了产物的紫外光固化行为。季铵盐能有效地催化环氧树脂和丙烯酸的反应，当其用量为０．６％～１．２％时，在９０～１１０℃反应４．５～８小时后，环氧基转化率大于９７％。由此配制的光固化涂料经紫外光辐照能快速固化。     

The effect of grass fiber filler on curing characteristics and mechanical properties of natural rubber

Natural rubber is reinforced with a novel type of grass fiber (Cyperus Tegetum Rox b). The effects of fiber loading of different mesh sizes on curing characteristics and mechanical properties of grass fiber filled natural rubber composite are studied. Since 400 mesh grass fiber loaded natural rubber composite shows superior mechanical properties, therefore the effect of silane coupling agent was studied for this particular composite. Here composites were prepared by using water leached grass fiber. Optimum cure time increases with the increase in fiber loading but the change in scorch time is less. The same trend of increase in optimum cure time is observed in the presence of Si69. But the value is higher compared to that of rubber composite without Si69. With increase in the fiber loading, modulus and hardness of the composite increases but tensile strength decreases. The mechanical properties of the composite, namely moduli at 200 and 300% elongation and hardness increase in the presence of Si69 but tensile strength is less compared to that of the composite without Si69. Elongation at break is not much affected due to the presence of Si69. Copyright © 2004 John Wiley & Sons, Ltd.     

光固化环氧丙烯酸酯/SiO2杂化材料的研究

用FTIR、SEM、DSC和TGA表征了光固化环氧丙烯酸酯／SiO2杂化材料[(EA-TMSPM)／SiO2]，研究了盐酸、γ-甲基丙烯酰氧丙基三甲氧基硅烷(TMSPM)和无机物浓度对(EA-TMSPM)／SiO2结构与性能的影响。结果表明，无机物浓度高的(EA-TMSPM)／SiO2杂化体系中SiO2粒子尺寸略大于无机物浓度低的体系；盐酸和无机物浓度的增加，都可以增强杂化材料的耐磨性。     

磷系阻燃环氧树脂研究

本文对近年来国内外9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物（DOPO）衍生物的合成及其应用于阻燃环氧树脂的方法进行介绍，并对所显示的阻燃性、热性能等作了概述和比较。将反应型磷系阻燃剂DOPO衍生物引入环氧树脂基体结构中形成阻燃持久、无卤、低烟、无毒、热稳定性好的新型含磷环氧树脂。     

Liquid chromatography of benzene derivatives on a porous methacrylate copolymer containing epoxy groups

Summary The retention of benzene derivatives with nonpolar and polar substituents on a porous methacrylate copolymer containing epoxy groups using both nonpolar and polar eluents was investigated. When n-hexane is used as the eluent, the retention of n-alkylbenzenes and polymethylbenzenes is weaker than that of benzene. In the case of benzene derivatives containing polar functional groups their capacity ratios (k) on this porous polymer increases approximately linearly with the increase of the adsorbate molecules dipole moment. The retention characteristics of the methacrylate copolymer were compared with that of a styrene-divinylbenzene copolymer and silica gels with a hydroxylated surface and with a surface modified by chemically bonded alkylsilyl groups.     

核／壳结构增韧剂对环氧树脂的抗冲改性

核／壳结构增韧剂对环氧树脂的抗冲改性张明耀，张会轩，杨海东，冯之榴（吉林工学院化学工程系长春１３００１２）（中国科学院长春应用化学研究所长春）关键词核／壳结构，增韧剂，环氧树脂，共混核／壳结构增韧剂是用分步乳液聚合技术制造的一种复合乳胶粒子，其核为橡...     

Synthesis of silanized polyether urethane hybrid systems. Study of the curing process through hydrogen bonding interactions

Different types of silanized polyurethanes (SPUR) were prepared in two ways: the first type (a), by reacting a polyether diol with an isocyanatesilane and the second type (b) by reacting it with diisocyanate (IPDI) and afterwards with aminosilane. These systems are able to cure with atmospheric moisture and, as a consequence, a tridimensional hybrid structure is formed where the inorganic and organic phases are bonded with covalent bonds. The evolution of the curing process in both systems has been monitored by means of Fourier transform infrared spectroscopy, through the changes observed in the carbonyl stretching vibration region. The results obtained show that the SPURs of kind (b) present stronger hydrogen bonding interactions as a consequence of urea groups present in the final structure. Moreover, given the proximity of both urethane and urea groups to alkoxysilane end groups, during the alkoxysilane curing process these groups are forced to approximate themselves even further and therefore the reticulation process leads to an increase of the self association of urethane and urea groups.Finally, DSC has been used to measure T_g values of the systems studied before and after the curing process. The obtained results have confirmed the main conclusions obtained in FTIR analysis.