Preparation of crosslinked epoxy microparticles via phase inversion

Differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) studies have been performed to reveal a crosslinked epoxy nature of the spherical particles formed in cured epoxy/DDS/PMMA blends. An interesting phase inversion phenomenon was observed in cured DGEBA/DDS/PMMA blends, which occurred at a relatively low thermoplastic composition of 20 phr PMMA in blends. A unique method of preparing crosslinked epoxy spheres of controlled sizes based on cure-induced phase inversion is described in this report. Several factors have been found to affect the geometry of the formed epoxy spheres. The volume fraction of PMMA in the blends strongly dominates the influence. With the increase of PMMA volume fraction in the blends, the spheres not only become smaller in sizes, but also more regular in the spherical geometry due to less impingement. The crosslinking density (DDS phr in the blends) has been found to influence the average sizes of the spheres. The cure temperature has relatively limited effects only when the PMMA loadings in the blends are relatively small. Various potential applications for the epoxy microspheres may be investigated in future studies. © 1996 John Wiley & Sons, Inc.     

A study on the glass transition behavior and morphology of semi-interpenetrating polymer networks

The epoxy resin/polyurethane semi-IPN was prepared and the glass transition behavior of the semi-IPN was discussed with DSC and DMA methods. The results show that the two glass transition temperatures (T_g) referring to epoxy resin and polyurethane respectively get closer. Between the two T_g there exists another T_g related to the interface between the two polymers. SEM indicates that this semi-IPN has a two-phase continuous structure which changes with different weight compositions. This is also proved by testing the Young's modulus. It is found that the IPN system has a cellular structure. Comparatively, the compatibility between the two polymers is the best when the weight ratio of EP/PU is 70/30. © 1996 John Wiley & Sons, Inc.     

Preparation and structural determination of siloxane-modified sulfone-containing epoxy resins

Siloxane-modified sulfone-containing epoxy resins (ESBS) were prepared by polycondensation of PMPS and/or PDMS siloxane oligomers with EBS, the sulfone-containing epoxy resin. Structures were analyzed by IR, ¹H-, and ¹³C-NMR. The siloxane content in the copolymers was determined by ¹H-NMR with an integration technique. Epoxy equivalent weight (EEW) determination indicated that the oxirane ring of EBS was intact with this hot-melt procedure. The GPC measurement of these ESBS copolymers showed that molecular weight (MW) increased with increasing siloxane content in PMPS-modified copolymers. Evidence of siloxane incorporation in the copolymer was discussed. © 1996 John Wiley & Sons, Inc.     

Effect of curing accelerators on thermal imidization of polyamic acids at low temperature

The effect of new additives on the thermal conversion of a range of polyamic acids to polyimides at temperatures lower than 100°C was investigated using infrared spectroscopy. Additives such as m-hydroxybenzoic acid, p-hydroxyphenylacetic acid, and p-hydroxybenzenesulfonic acid were found to be highly effective as curing catalysts or accelerators. The degree of imidization of polyamic acids in the presence of additives increased with an increase in the reaction temperature, and complete imidization was achieved at 140–200°C. The reaction was characterized by a rapid rate that slowed with time. © 1996 John Wiley & Sons, Inc.     

Enthalpy relaxation in a partially cured epoxy resin

The enthalpy relaxation of a partially cured (70%) epoxy resin, derived from diglycidyl ether of bisphenol-A cured by methyl-tetrahydrophthalic anhydride with accelerator, has been investigated. The key parameters of the structural relaxation (the apparent activation energy Δh*, the nonlinearity parameter x, and the nonexponentiality parameter β) are compared with those of the fully cured epoxy resin. The aging rates, characterized by the dependences of the enthalpy loss and peak temperature on log(annealing time), are greater in the partially cured epoxy than they are in the fully cured resin at an equivalent aging temperature (T_a = T_g − 20°C). There is a significant reduction in Δh*, from 1100 kJ mol⁻¹ for the fully cured system to 615 kJ mol⁻¹, as the degree of cure is reduced. The parameter x determined by the peak-shift method appears essentially independent of the degree of cure (x = 0.41 ± 0.03 for the partially cured resin compared with 0.42 ± 0.03 obtained previously for the fully cured resin), and does not follow the usually observed correlation of increasing x as Δh* decreases. This invariability of the parameter x seems to indicate that it is determined essentially by the local chemical structure of the backbone chain, and rather little by the supramolecular structure. On the other hand, the estimated nonexponentiality parameter β lies between 0.3 and 0.456, which is significantly lower than in the fully cured epoxy (β ≅ 0.5), indicative of a broadening of the distribution of relaxation times as the degree of cross-linking is reduced. Like the parameter x, this also does not follow the usual correlation with Δh*. These results are discussed in the framework of strong and fragile behavior of glass-forming systems, but it is difficult to reconcile these results in any simple way with the concept of strength and fragility. © 1996 John Wiley & Sons, Inc.     

Characterization of the molecular deformation behavior of glassy epoxy resins by rheo-optical FTIR spectroscopy

Rheo-optical FTIR spectroscopy was used for the first time to monitor molecular orientation phenomena in highly crosslinked epoxies. After studying the orientation behavior of epoxy/amine networks during uniaxial deformation above their glass transition temperature in a preceding article, this article deals with the rheo-optical characterization of the deformation process of those epoxy systems below T_g. The orientation behavior is influenced by the different molecular structure of the constituents and the free volume entrapped in the resins. Yield strain and tensile modulus are correlated with the slope of the orientation function. The orientation function was found to show an abrupt change of its slope in the yield point region. This phenomenon is discussed with respect to the mechanism of plastic deformation. © 1996 John Wiley & Sons, Inc.     

The dynamic mechanical behavior of random-in-plane short fiber-reinforced epoxy resin composites

In the present paper, the dynamic mechanical properties of random-in-plane short fiber-reinforced epoxy resin composites were studied by using a rheometrics solids analyzer. The three-point bend testing of the four composites (glass fiber/913 epoxy resin, glass fiber/924 epoxy resin, carbon fiber/913 epoxy resin and carbon fiber/924 epoxy resin) was carried out over temperatures from −100°C to 200°C at a frequency of 10 Hz and strain 0.05%. The composites based on 924 epoxy resin, which has been designed specially for high temperature applications, have less energy loss than the 913 epoxy resinbased composites. For the same resin, the carbon fiber-reinforced composites have less energy loss than the glass fiber-reinforced composites. All the composites have less energy loss than their corresponding matrices; the greater the fiber content, the lower the energy loss. The beta transition of 913 epoxy resin has been shifted to a higher temperature after being reinforced. It was shifted from −50°C to −30°C after being reinforced with glass fiber and made a diffuse shoulder-like peak commencing at −30°C after being reinforced with carbon fiber. The 924 epoxy resin has undergone the same change in beta transition as the 913 resin, though to a smaller extent. The phenomenon suggested that interactions between the macromolecules of the epoxy resins and the molecules along the fiber's surface.     

磷系阻燃环氧树脂研究

本文对近年来国内外9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物（DOPO）衍生物的合成及其应用于阻燃环氧树脂的方法进行介绍,并对所显示的阻燃性、热性能等作了概述和比较。将反应型磷系阻燃剂DOPO衍生物引入环氧树脂基体结构中形成阻燃持久、无卤、低烟、无毒、热稳定性好的新型含磷环氧树脂。     

聚铝碳硅烷纤维预氧化过程组成结构演变的研究

采用热重-差热分析、元素分析、扫描电子显微镜、凝胶渗透色谱、红外光谱和核磁共振等手段, 研究了聚铝碳硅烷(PACS)纤维预氧化过程中组成、结构演变的规律和反应机理. 结果表明, 空气中PACS纤维从210 ℃左右开始与氧发生放热反应; 随着预氧化温度的升高, 纤维的氧含量逐渐增加, 凝胶含量在氧增重为6～8 wt%时急剧增加, 纤维表面出现细小的微裂纹. 预氧化初期, 主要是Si—H键与氧的反应, 生成Si—O—Si键, 纤维的数均分子量急剧增加, 形成交联结构; 预氧化中期, Si—H键继续反应, Si—O—Si结构明显增多, 同时Si—CH₃和Si—H与氧反应, 生成少量的Si—O—C结构; 预氧化后期, 纤维完全交联, 纤维中存在SiC₄, SiC₃H, Si—O—Si和少量的Si—O—C结构.     

新型环氧生物降解交联剂的制备及交联壳聚糖膜的性能

新型环氧生物降解交联剂的制备及交联壳聚糖膜的性能;生物降解材料;环氧;交联剂;壳聚糖