Theoretical prediction of the contact distance dependence of the electron transfer reactivity of the ClO/ClO− coupling system

On the basis of the structures and properties of the ClO/ClO^? system obtained at the density functional theory (DFT) (UB3LYP) level, employing the 6‐311+G(3df) standard basis set, the electron transfer reactivity of this system is investigated. The results indicate that there are five possible stable coupling complexes that correspond to the generous minima on the global potential energy surfaces (PES). The most stable coupling complex is planar EC4, in which there is a O? O linkage with two trans‐Cl atoms. Their stabilization energies are calculated to be 20.57 (EC1: C₁), 20.54 (EC2: C₂, ²B), 20.69 (EC3: C₁), 20.70 (EC4: C_s, ²A′), and 20.69 (EC.5: C_2h, ²B_u) kcal/mol at the B3LYP/6‐311+G(3df) level; with the correction of the basis set superposition error (BSSE), the stability order of these encounter complexes is EC4 > EC.5 > EC3 > EC1 > EC2. Based on the five encounter complexes, five coupling modes are designed for the study of the electron transfer reactivity of this system. The dissociation energy curves at the activated states and the corresponding activation energies of these five coupling modes are obtained and are compared at the B3LYP/6‐311+G(3df) and MP2/6‐311+G* levels. The inapplicability of DFT methods has also been discussed in this article in predicting the energy curves, especially with a long contact distance, in which DFT methods give the abnormal behavior for the dissociations of the complexes caused by the “inverse symmetry breaking” problem. On the basis of the golden rule of the time‐dependent perturbation theory, the electron transfer reactivity and the contact distance dependence of the various electron transfer kinetics parameters (e.g., activation energy, coupling matrix element) have been analyzed at the UMP2(full)/6‐311+G* level. The electron transfer can take place over a range of contact distances, but the most effective coupling distance corresponds to only a small range. The coupling orientation analyses also indicate that the most favorable coupling mode to the electron transfer does not always correspond to the most stable encounter complex mechanism. Some highly energetic coupling modes are more favorable for the electron transfer. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Small-angle neutron-scattering study of concentrated nonionic-amphiphile solutions

The structure of aqueous solutions of two polyoxyethylene non-ionic amphiphiles, C₁₀E₅ and C₈E₄, is studied by small-angle neutron-scattering along isothermal paths crossing the isotropic single-phase region from 0% to 100% amphiphile volume fractions. The scattered intensityI(k) shows a peak at a valuek _m , which grows monotonically as the amphiphile volume fraction increases. The interpretation of the scattering data lead to the following conclusion: as increases the micellar structure becomes less and less sharp, but some orientational correlations between neighboring amphiphile molecules are preserved even in the pure amphiphile phase.     

Heating rate effect on the DSC kinetics of oil shales

This research was aimed to investigate the combustion and kinetics of oil shale samples (Mengen and Himmetoğlu) by differential scanning calorimetry (DSC). Experiments were performed in air atmosphere up to 600°C at five different heating rates. The DSC curves clearly demonstrate distinct reaction regions in the oil shale samples studied. Reaction intervals, peak and burn-out temperatures of the oil shale samples are also determined. Arrhenius kinetic method was used to analyze the DSC data and it was observed that the activation energies of the samples are varied in the range of 22.4–127.3 kJ mol⁻¹ depending on the oil shale type and heating rate.     

H2CCF自由基与HNCO反应机理的理论研究

采用密度泛函理论的B3LYP方法, 在6-311＋＋G(d,p)基组水平上研究了H₂CCF自由基与HNCO的微观反应机理, 优化了反应过程中的反应物、中间体、过渡态和产物, 为了获得更精确的能量信息, 还在QCISD(T)/6-311＋＋G(d,p)基组水平上计算了各物质的能量．振动分析结果和IRC分析结果证实了中间体和过渡态的真实性, 计算所得的成键临界点电荷密度的变化也确认了反应过程．对于H₂CCF自由基与HNCO反应, 我们找到了六条可行的反应通道, 结果分析表明通道H₂CCF＋HNCO→IM3→TS5→H₂CCFH＋NCO控制步骤活化能最低, 是该反应的主要通道, 在此反应过程中有稳定的氢键复合物IM3生成, 还表现出氢原子迁移的反应特征．     

Phase transition and mixed oxide-proton conductivity in germanium oxy-apatites

La_9.75□_0.25(Ge₆O₂₄)O_2.62 oxy-apatite shows a phase transition from triclinic to hexagonal symmetry at approximately 1020 K that has been characterised by high-temperature synchrotron X-ray and neutron powder diffraction, and ionic conductivity measurements. The crystal structure at 1073 K has been determined from joint Rietveld refinements of synchrotron X-ray and neutron powder diffraction data. The study shows that hexagonal-La_9.75□_0.25(Ge₆O₂₄)O_2.62 contains interstitial oxygen at the position previously reported for other oxy-germanates. Changes in the oxide conductivity associated with this structural transition are discussed. The thermal analyses showed a weight loss on heating close to 600 K very likely due to water release. The synchrotron thermodiffractometric study shows an anomaly in the cell parameters evolution at that temperature, which indicates that this residual water is located into the apatite channels. The electrical characterisation under different atmospheres (dry and wet synthetic air) indicates that there is a significant proton contribution to the overall conductivity below 600 K, mainly under wet atmosphere.     

Thermal Studies on Ionic Derivatives of Hafnium(IV) Involving Maltol Ligand

A number of ionic chelate complexes of maltol(A) and hafnium(IV) the type[(η₅−C₅H₅)₂HfL]⁺[MCl3]⁻ (B) [HL=maltol; M=Zn(II), Cd(II), Hg(II), Cu(II)]have been synthesized and characterized by spectral studies (IR, UV, ¹H NMR and ¹³C NMR). The stoichiometry of the complexes has been confirmed by conductance measurements. Thermogravimetric (TG) and differential thermal analytical (DTA) studies have been carried out for these complexes and from TG curves, the order, apparent activation energy and apparent activation entropy of the thermal decomposition reactions have been elucidated .The order in each case has been determined to be one and the degree of spontaneity and lability have been inferred from the apparent activation energy and entropy, respectively. Thermal parameters have been correlated with some structural aspects of the complexes concerned. From differential thermal analysis curves, the heat of reaction has been calculated. This revised version was published online in August 2006 with corrections to the Cover Date.     

Influence of the activation temperature on structural and textural properties of NiMo/Al2O3 hydrodesulfurization catalysts

Investigations of a commercial NiMo/Al₂O₃ hydrodesulfurization (HDS) catalyst are directed towards optimization of the activation procedure of HDS catalyst concerning active phase formation and thermal stability. Structural and textural data obtained with XRD, IR-FTIR, XPS and LTNA reveal that the optimal temperature for the formation of active species on the catalyst surface and an appropriate pore structure is 300°C.     

Boson peak and fast relaxation process near the glass transition in polystyrene

Atactic polystyrene, both side group and main chain deuterated, was investigated by inelastic neutron scattering in a wide temperature range around the glass transition from 2 to 450 K. In the glass the Boson peak position is only very weakly influenced by the deuteration of the phenyl group. In the neighborhood of the glass transition temperatureT _g we find a fast relaxation process similar to other glasses. The onset of the fast relaxation in polystyrene, however, is observed already at temperaturesT _g — 200 K. Results from partially deuterated polystyrene suggest a change of the phenyl ring dynamics already far belowT _g.     

Reduced parabolic model for radical addition reactions

The transition state of addition of free radicals and atoms to multiple bonds is considered as a result of intersecting of two parabolic potential curves. One of them characterizes the stretching vibration of the attacked multiple bond, and another curve characterizes the stretching vibration of the bond formed in the transition state. The force constant of the latter is calculated by an empirical equation that correlates the force constant with the bond dissociation energy. In the framework of this model, the thermally neutral activation energy (E _e0) and the elongation of the attacked and formed bonds (r _e) in the transition state were calculated from the experimental data (activation energy (E _e) and enthalpy of reaction (H _e)) for the addition of an H atom and methyl, alkoxyl, aminyl, triethylsilyl, and peroxyl radicals to the C=C bond and the addition of H and CH₃ to the C=O and CC bonds. Analysis of the data obtained showed that E _e0 depends linearly on the |H _e| + E_e sum, i.e., E_e0/kJ mol^–1 = 14.2 + 0.61 · (E_e – H _e), and the bond elongation in the transition state for addition of the most part of radicals to ethylene and acetylene vary within (0.65–0.87)·10_–10 m. The factors affecting the activation energy of the radical addition reactions are discussed.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1542–August, 2004.     

Unexpected valence bond isomerization of [1,2,4]triazolo[3,4-c][1,2,4]benzotriazines under flash vacuum pyrolytic (fvp) conditions

Flash vacuum pyrolysis (fvp) of some substituted [1,2,4]triazolo[3,4-c][1,2,4]benzotriazine derivatives (1a-d) has been studied between 450 and 600 °C. The only transformation observed up to 525 °C was the unexpected valence bond isomerization of the angularly fused starting compounds to the isomeric linearly fused [1,2,4]triazolo[4,3-b][1,2,4]benzotriazine derivatives (9a-d), whereas at higher temperatures fragmentation products such as aromatic nitriles were also formed. Kinetic measurements revealed negative entropies of activation in the isomerization process, which suggest a concerted ring closure reaction to an intermediate antiaromatic diazirine. Reversibiblity of the title isomerization reaction was also proved by FVP experiments.