聚丙烯/纳米蒙脱土复合材料的结晶动力学研究

采用热分析方法，研究了聚丙烯／纳米蒙脱土复合材料（PP／CLAY）的等温结晶行为，并分别用Avrami方程和赵志英方法对所得数据进行了分析，研究结果表明，纳米蒙脱土微粒对聚丙烯等温和非等温结晶行为均有不同程度的影响，可提高聚丙烯的结晶速率并改善结晶结构。     

Effect of thermal history on crystallization and melting behaviour of lldpe

In this paper two LLDPE samples with their own structural parameters were studied by means of DSC. Experimental results show that DSC was good for revealing slight structural difference between these two samples. Furthermore, the effect of thermal history on crystallization and melting behaviour of LLDPE was observed clearly through varying conditions of thermal treatment.

---

Zusammenfassung Mittels DSC werden zwei LLDPE-Proben mit ihren eigenen Strukturparametern untersucht. Die Versuchsergebnisse zeigen, da\ sich DSC gut eignet, um gering fügige Unterschiede dieser zwei Proben nachzuweisen. Weiterhin wurde unter verschiedenen Bedingungen der Einflu\ der thermischen Vorgeschichte auf das Kristallisations-und Schmelzverhalten von LLDPE untersucht.

     

聚(丁二酸丁二酯-co-丁二酸丙二酯)的等温结晶行为研究

以1,4-丁二酸、1,4-丁二醇和1,3-丙二醇为原料通过直接熔融缩聚法合成了聚丁二酸丁二酯(PBS),聚丁二酸丙二酯(PPS)和聚(丁二酸丁二酯-co-丁二酸丙二酯)(PBSPS)等脂肪族聚酯.利用1H-NMR,WAXD,DSC和POM等研究了聚酯的结晶结构和结晶动力学过程等结晶行为.PBSPS的结晶晶型与PBS一致,说明只有丁二酸丁二酯(BS)单元结晶而丁二酸丙二酯(PS)单元处于无定形区.聚酯等温结晶后,在升温熔融过程中出现了多重熔融峰.分析表明多重熔融峰主要来自于聚酯升温过程中的熔融-重结晶行为.利用Avrami方程分析了聚酯的等温结晶动力学,Avrami指数n为2.2~2.8,说明聚酯等温结晶时主要以异相成核的三维生长方式进行;随着PS单元的增多,聚酯的表观结晶活化能升高,也就是说BS单元的结晶变得困难.POM观察到聚酯等温结晶时都出现了环带球晶现象,球晶形态会随着结晶温度和化学结构差异而改变.     

Amphiphilic biodegradable poly(CL-b-PEG-b-CL) triblock copolymers prepared by novel rare earth complex: Synthesis and crystallization properties

Amphiphilic biodegradable poly(CL-b-PEG-b-CL) triblock copolymers have been successfully prepared by the ring-opening polymerization of ε-caprolactone (CL) employing yttrium tris(2,6-di-tert-butyl-4-methylphenolate) [Y(DBMP)₃] as catalyst and double-hydroxyl capped PEGs (DHPEG) as macro-initiator. The triblock architecture, molecular weight, thermal and crystallization properties of the copolymers were characterized by NMR spectra, SEC, DSC and WAXD analyses. The isothermal crystallization behavior of the copolymers was investigated by POM analysis in detail, which is greatly influenced by the length of PCL and PEG blocks. On the POM micrograph of PEG_10,000-(PCL₈₆₀₀)₂, a unique morphology of concentric spherulites was observed due to the sequent crystallization of the PCL and PEG blocks.     

Thermoanalytical Study of O,O'-Dibenzoyl-(2R,3R)-Tartaric Acid Supramolecular Compounds Part II. Investigation of the resolution of racemic alcohols

The resolution of three chiral alcohols with O,O'-dibenzoyl-(2R,3R)-tartaric acid (DBTA) via diastereoisomeric supramolecular compound formation was investigated with thermoanalytical methods. On the basis of TG measurements the DBTA:chiral alcohol molar ratio in the compounds is 1:1 which agrees with the results of single-crystal X-ray diffraction analysis. The DBTA – chiral alcohol supramolecular compounds have different supramolecular structure than the DBTA – achiral alcohol supramolecular compounds. The supramolecular compounds containing cyclohexanols have higher thermal stability than the compounds containing acyclic aliphatic alcohols. The amount of unreacted DBTA monohydrate in the solid phase can be determined both with DSC and with TG measurements. This revised version was published online in August 2006 with corrections to the Cover Date.     

Formation and Crystallization Behavior of Gels in the Na2O-SiO2-TiO2-ZrO2 System

SiO₂-TiO₂-ZrO₂ and 5Na₂O·95(SiO₂ + TiO₂ + ZrO₂) gels were synthesized and role of Na₂O in gel formation and crystallization behavior of gels were studied. From Si(OC₂H₅)₄, Ti(iso-OC₃H₇)₄, Zr(n-OC₃H₇)₄ and NaOCH₃ solutions in EtOH without H₂O, transparent and opaque gels were obtained. Opaque bulk gels, rich in TiO₂ or ZrO₂ composition in Na₂O containing SiO₂-TiO₂-ZrO₂ system, contain agglomerated spherical particles of diameter small <10 m, in contrast with opaque gels having large particles <30 m in alkali-free SiO₂-TiO₂-ZrO₂ system. Crystallization temperature (Tc) was measured by DTA on dried gels. Compared with the alkali-free SiO₂-TiO₂-ZrO₂ gels, 5 mol% Na₂O containing gels gave lower Tc in SiO₂ rich compositions and higher in TiO₂ rich or ZrO₂ rich compositions.     

THEORETICAL ANALYSIS OF KINETICS OF NONISOTHERMAL CRYSTALLIZATION OF POLYMERS

The classical crystallization theories proposed by Avrami, Evans, and Mandelkern wereextended to the nonisothermal situation. The expressions derived from the classical equations canbe expressed in either the differential form or the integral form. A method was provided so as toobtain the parameters characterizing the crystallization rate and mechanism from DSC curves withseveral constant heating or cooling rates. The rate constants of crystallization obtained from bothisothermal and nonisothermal curves of poly(ethylene terephthalate)were compared.     

Effect of carbon nanotubes on the crystallization and properties of polypropylene

The effect of different concentrations of single‐walled carbon nanotubes (SWNTs) on the nonisothermal crystallization kinetics, morphology, and mechanical properties of polypropylene (PP) matrix composites obtained by melt compounding was investigated by means of X‐ray diffraction, differential scanning calorimetry, optical and scanning electron microscopy, and dynamic mechanical thermal analysis. Microscopy showed well‐dispersed nanotube ropes together with small and large aggregates. The modulus was found to increase by about 75% at a level of 0.5 wt % nanotubes. The SWNTs displayed a clear nucleating effect on the PP crystallization, favoring the α crystalline form rather than the β form. The crystallization kinetics analysis showed a significant increase in activation energy on incorporating nanotubes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2445–2453, 2005     

Crystallization of polymers in variable external conditions

General equations of crystallization in variable conditions derived in the former paper [1] have been applied to non-isothermal crystallization of unstressed and unoriented polymers. Crystallization rate involving transient and athermal effects is controlled by temperature,T, and cooling rate,. Experimental procedures leading to determination of three temperature-dependent material functions: steady-state crystallization rate,K _st(T), relaxation time, (T), and athermal nucleation function, Z(T), are outlined.     

Crystallization of poly(N-methyldodecano-12-lactam) in blends with poly(styrene-stat-acrylic acid)

Crystallization behaviour of blends of poly(N-methyldodecano-12-lactam) (PMDL) with statistical copolymer poly(styrene-stat-acrylic acid) (PSAA) has been studied by the DSC and WAXD methods. The blend films prepared from dioxane solutions were crystallized at laboratory temperature for five days. Approximate crystallinities of as-prepared neat lower- PMDL 5 and higher-molecular weight PMDL 45 were 28% and 19%, respectively. With increasing PSAA content in the blends the crystallinities decreased sharply. The melting point of the primary crystalline structure of PMDL showed a decreasing dependence on PSAA content in the blends, confirming miscibility of the PMDL-PSAA pair. Recrystallization was strongly suppressed in the blends. The lower-melting endotherm appearing at about 10-15 °C above the crystallization temperature was attributed to melting to less perfect structures formed during secondary crystallization. In neat PMDL, the extent of secondary crystallization was approximately 5-10%. In the blends containing 20% PSAA approximate relative proportion of secondary crystallites on total crystallinity was 40% and 60% for the blends with PMDL 5 and PMDL 45, respectively. WAXD measurements did not reveal any change in crystal modification on blending. Increased T_g in blends of flexible PMDL cannot play a significant role in suppression of primary in favour of secondary crystallization. This was attributed to low mobility of PMDL chains due to dilution effect and specific interactions with the amorphous copolymer component, and, in case of the higher-molecular-weight PMDL, a greater involvement of entanglements. Higher T_g of blends was involved in retardation of non-isothermal crystallization on cooling and subsequent cold crystallization.